Ripoffbritain Posted April 22, 2017 Share Posted April 22, 2017 I've got the max5 which is bigger but yours will definitely fit where the old one came from,I'm guessing their stuck down with double sided tape, you shouldn't need to cut anything. google max6 xmaxx should bring up some pics to help. Quote Link to comment Share on other sites More sharing options...
Harris2258 Posted April 22, 2017 Share Posted April 22, 2017 2 minutes ago, Ripoffbritain said: I've got the max5 which is bigger but yours will definitely fit where the old one came from,I'm guessing their stuck down with double sided tape, you shouldn't need to cut anything. google max6 xmaxx should bring up some pics to help. Thanks? Quote Link to comment Share on other sites More sharing options...
evssv Posted April 22, 2017 Share Posted April 22, 2017 (edited) 8 minutes ago, Harris2258 said: Thanks? I had to trim 2x bits of plastic off to fit the max5fitted here The 6 will fita lot better in the gap mines sort of resting on the edge of the rx box and is angled down towards the motor Edited April 22, 2017 by evssv Quote Link to comment Share on other sites More sharing options...
Harris2258 Posted April 22, 2017 Share Posted April 22, 2017 4 minutes ago, evssv said: I had to trim 2x bits of plastic off to fit the max5fitted here The 6 will fita lot better in the gap mines sort of resting on the edge of the rx box and is angled down towards the motor Cheers there's not much on google about installing max6 Quote Link to comment Share on other sites More sharing options...
evssv Posted April 22, 2017 Share Posted April 22, 2017 Just now, Harris2258 said: Cheers there's not much on google about installing max6 I'd assum it'll go same place as mine but sit on the chassis flat as its smaller then the max5 Quote Link to comment Share on other sites More sharing options...
Harris2258 Posted April 22, 2017 Share Posted April 22, 2017 ? Quote Link to comment Share on other sites More sharing options...
evssv Posted April 22, 2017 Share Posted April 22, 2017 (edited) 17 minutes ago, Harris2258 said: ? ??which bit didn't u understand? ? Edited April 22, 2017 by evssv Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted April 22, 2017 Share Posted April 22, 2017 1 hour ago, Harris2258 said: Cheers there's not much on google about installing max6 This is a max6 installed goes where the stock esc fits use the double sided tape it comes with to hold it down and if you want you can add a zip tie across the top as a safety measure 1 Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted April 22, 2017 Share Posted April 22, 2017 I dremelled out the crossbar on the cage thing. I rekon you could get round it if you took it off etc but I just dremelled it out Quote Link to comment Share on other sites More sharing options...
evssv Posted April 22, 2017 Share Posted April 22, 2017 2 hours ago, mydoddy69 said: This is a max6 installed goes where the stock esc fits use the double sided tape it comes with to hold it down and if you want you can add a zip tie across the top as a safety measure exactly what I ment by it`ll sit on the chassis flat..unlike my max5 on a angle....as it wont fit in the gap unless I mover the rx box which I cant b asssed tbh.... 1 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted April 22, 2017 Share Posted April 22, 2017 5 minutes ago, evssv said: exactly what I ment by it`ll sit on the chassis flat..unlike my max5 on a angle....as it wont fit in the gap unless I mover the rx box which I cant b asssed tbh.... Max5 same spot note the rx box Quote Link to comment Share on other sites More sharing options...
evssv Posted April 22, 2017 Share Posted April 22, 2017 so y didn't mine fit like that??or did I not do sumin right???? Quote Link to comment Share on other sites More sharing options...
evssv Posted April 22, 2017 Share Posted April 22, 2017 have u removed the lower lip on the rx box??? Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted April 23, 2017 Share Posted April 23, 2017 4 hours ago, evssv said: have u removed the lower lip on the rx box??? Yes and added a plate to mount it all flush .. Its a bit of a faff to do but the end result is nice Quote Link to comment Share on other sites More sharing options...
Harris2258 Posted April 23, 2017 Share Posted April 23, 2017 11 hours ago, evssv said: ??which bit didn't u understand? ? Sorry mate the question mark was supposed to be thumbs up 1 Quote Link to comment Share on other sites More sharing options...
Harris2258 Posted April 23, 2017 Share Posted April 23, 2017 Thanks guys for all your help just need to get round the missus and order one this week Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted April 23, 2017 Share Posted April 23, 2017 3 hours ago, Harris2258 said: Thanks guys for all your help just need to get round the missus and order one this week I find hand bags the best way around the Mrs... Quote Link to comment Share on other sites More sharing options...
evssv Posted April 23, 2017 Share Posted April 23, 2017 5 hours ago, Harris2258 said: Sorry mate the question mark was supposed to be thumbs up no worries Quote Link to comment Share on other sites More sharing options...
evssv Posted April 23, 2017 Share Posted April 23, 2017 (edited) 8 hours ago, mydoddy69 said: Yes and added a plate to mount it all flush .. Its a bit of a faff to do but the end result is nice Ahh. Cool ...I'm happy with mine as is tbh .until I wanna get in the box Edited April 23, 2017 by evssv Quote Link to comment Share on other sites More sharing options...
scoobied77 Posted April 23, 2017 Share Posted April 23, 2017 Anyone who's got the proline raptor body did yours come very slightly roughed inside? I've normally roughed mine when washing them with soapy water with a scotch pad (or similar) but not sure if this one needs it as it looks like it's been factory done? Quote Link to comment Share on other sites More sharing options...
atom3624 Posted April 23, 2017 Share Posted April 23, 2017 Sounds very unusual - never heard of them being 'pre-prepped' before. Al. Quote Link to comment Share on other sites More sharing options...
JoePGM Posted April 23, 2017 Share Posted April 23, 2017 (edited) deleted Edited April 23, 2017 by JoePGM Quote Link to comment Share on other sites More sharing options...
scoobied77 Posted April 24, 2017 Share Posted April 24, 2017 17 hours ago, atom3624 said: Sounds very unusual - never heard of them being 'pre-prepped' before. Al. Yeah think your right. I'm gonna scrub it myself as usual. Quote Link to comment Share on other sites More sharing options...
atom3624 Posted April 24, 2017 Share Posted April 24, 2017 Hope they haven't scrubbed the windows!! Quote Link to comment Share on other sites More sharing options...
JoePGM Posted April 24, 2017 Share Posted April 24, 2017 On 4/22/2017 at 23:41, mydoddy69 said: Max5 same spot note the rx box Hi mydoddy69. I have the same Zippy 6200 battery sitting in my MAX, however I find that there are a big gap between the battery and the top grey door lock. Did you filled something in the battery tray so raised the bottom floor? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.