evssv Posted April 26, 2015 Author Share Posted April 26, 2015 (edited) Had this drifting Last night . ... Savage flux 4 wheel drifting: https://youtu.be/2gzEbliZIRM Watch "Losi8 & savage flux drifting vid2" on YouTube Losi8 & savage flux drifting vid2: https://youtu.be/r6ll-HtrOVY Savage flux losi8 drifting vid3: https://youtu.be/6pvHMp35sP8 the new rear diff and casing has worked...no more nasty clicking under acceleration. ...its running sweet now..gonna go out in a bit for a pack or 4... Edited April 26, 2015 by evssv 1 Quote Link to comment Share on other sites More sharing options...
evssv Posted May 17, 2015 Author Share Posted May 17, 2015 (edited) so much for these mad max arms . .happened today at arnos Vale. . was pulling off sum maybe 7-9 ft air jumps and landing them pretty sweet. ... unlike sullys last one...lol...12 ft air maybe... lots of damage....so I have now stuck a stock arm on and will stock up on sum... Edited May 17, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
Tug Posted May 18, 2015 Share Posted May 18, 2015 I only run stockers, they're fine if you keep things sensible. Quote Link to comment Share on other sites More sharing options...
jordan_bench10 Posted May 18, 2015 Share Posted May 18, 2015 I only run stockers, they're fine if you keep things sensible. Ive never broke one only snapped hingepins Quote Link to comment Share on other sites More sharing options...
evssv Posted May 18, 2015 Author Share Posted May 18, 2015 aint nuting moving with the alza bulk heads in place....there chunkey as Quote Link to comment Share on other sites More sharing options...
Wrighty8766 Posted May 18, 2015 Share Posted May 18, 2015 I have the RPM's and I can vouch that they take anything you throw at them....I have had them 30-40ft with some pretty bad landings and they just keep on going Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
evssv Posted May 18, 2015 Author Share Posted May 18, 2015 hhmm...only thing is they don't have the sway bar hole....I`d have to make one in em....but if there really that good then the hole wont b a problem.... Quote Link to comment Share on other sites More sharing options...
Wrighty8766 Posted May 18, 2015 Share Posted May 18, 2015 Only problem you have then is that you void the warranty. Another slight issue is that they are a little beefier than the stock arms so a little filing is necessary for smooth movement, that is just personal choice though Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
evssv Posted May 18, 2015 Author Share Posted May 18, 2015 thk I mite jus get sum rear ones and make a hole/file em an see how long they last....if ur doing 30-40 ft jumps then I should b ok... Quote Link to comment Share on other sites More sharing options...
evssv Posted June 21, 2015 Author Share Posted June 21, 2015 (edited) http://youtu.be/1Sf7HZj5XMMhttp://youtu.be/GSftBmcnJxs top of Brean down Edited June 21, 2015 by evssv 1 Quote Link to comment Share on other sites More sharing options...
evssv Posted June 22, 2015 Author Share Posted June 22, 2015 (edited) me sterring was crap by time I got home to give it a blast in the street to get sum Sand off..so much so it had no sterring ...servo saver nut had backed almost off completely. .. all sorted now..plus I put a small cable tie on the end behind the nut...should stop it undoing hopefully Edited June 22, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
Daveyb84 Posted June 22, 2015 Share Posted June 22, 2015 I hope those circles from the donuts you pulled with the savage Quote Link to comment Share on other sites More sharing options...
evssv Posted June 22, 2015 Author Share Posted June 22, 2015 I hope those circles from the donuts you pulled with the savage yep..all done by me.........lol I wish. ..it looked amazing from up there. ....I bet he makes crop circles aswell..... Quote Link to comment Share on other sites More sharing options...
evssv Posted July 19, 2015 Author Share Posted July 19, 2015 Kewstoke damage I'll fix em later on Quote Link to comment Share on other sites More sharing options...
evssv Posted July 20, 2015 Author Share Posted July 20, 2015 (edited) No wonder me sterring is stuck...bent horn..jammed on bottom of rx box!!..how'd the fudge i manage that! ?! Edited July 20, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted July 20, 2015 Author Share Posted July 20, 2015 (edited) fr end desanded and found bent shox top bolt .I'm never going on sand again!! Edited July 20, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted July 20, 2015 Author Share Posted July 20, 2015 (edited) Do I straighten it or replace it? ? I straightened it... looks almost perfect now .It's all back togather now ready for nx bash Edited July 20, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted August 29, 2015 Author Share Posted August 29, 2015 (edited) Just got in from St Georges park...manged 3 packs...1x 4s an 2x 6s ....With no damage!! .apart from 2 broke velcro straps..which in turn made me lipo tray move and chomp through me on/off switch wire. .. ...but other then that ..all good!!.jus as well I got 3 of these at hand Edited August 29, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted August 29, 2015 Author Share Posted August 29, 2015 (edited) smashed the bottom of the esc aswell. ..oops! ! ...bit a glue...its all soldered up an back togather now. ...and Working !!didn't use the new switch. ...jus about managed to solder them back togather Edited August 29, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted October 20, 2015 Author Share Posted October 20, 2015 (edited) so..After 2 outings and not even doing a pack on each one due to failures. ....me savvy is back up n running. ....first off this.....but now I have these bad boys. ..I fitted them wrong.....lol....and crashed into a steel railing. .ripping out the rear left arm.....so I now fitted me rpm's on the rear....and mounted the fonzie rods under the knuckles .It runs sweet now .. . I had them on top..... Edited October 20, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted November 28, 2015 Author Share Posted November 28, 2015 So the weather's poo as usual on a wk end so I'm gonna sort me loss of drive to fr wheel and fit sum irc cups Quote Link to comment Share on other sites More sharing options...
evssv Posted November 28, 2015 Author Share Posted November 28, 2015 As i thought... ..pin again Quote Link to comment Share on other sites More sharing options...
evssv Posted November 28, 2015 Author Share Posted November 28, 2015 (edited) ahh crap...looks like savvy diif cups r drilled slighty different to mt4g3 ones for the crown gear....ho well..... Edited November 28, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted November 28, 2015 Author Share Posted November 28, 2015 (edited) Whats left of my pin . .ans jus ordered this http://pages.ebay.com/link/?nav=item.view&id=351189401713&alt=web cheaper buying a whole one rather the jus the outputs.......there 19 a pair!!....and irc has no cups listed. ... Edited November 28, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted November 28, 2015 Author Share Posted November 28, 2015 (edited) Hhmm....slightly too much play here i thk.....and there both worn pretty bad around the pin holes. . Edited November 28, 2015 by evssv Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.