FTX vantage

[haskins104]

think i may have bent something on my vantage brushed version. done a jump and ended up doing a couple of cartwheels. so when driving in a straight line can't keep it straight the back wheels look slightly bent in but very hard to tell, will put a pic up soon. can the wheel angles like camber be changed on the standard rc vantage cause it looks like it can but I've tried but can't work it out.

[david-6]

Hi. You may have jumped teeth on the servo causing it to turn, try adjusting the steering trim and see if that helps.

You can adjust camber on the front and rear using a 4mm spanner (I think). The rear does have a bit of toe-in from factory to help with cornering, but this can't be adjusted I'm afraid.

HTH

Dave

Edited August 9, 2014 by david-6

[haskins104]

Hi. You may have jumped teeth on the servo causing it to turn, try adjusting the steering trim and see if that helps.

You can adjust camber on the front and rear using a 4mm spanner (I think). The rear does have a bit of toe-in from factory to help with cornering, but this can't be adjusted I'm afraid.

HTH

Dave

tried the trim for the steering but doesn't work. but found a crack at the front of the car across the front maybe this is why.

[happygreenblob]

You could have bent the pin that holds the suspension arms on I did that once it makes a wonky wheel which could be it have a look!