Alex97 Posted October 27, 2013 Share Posted October 27, 2013 (edited) Hello Over this week and may be some of next week ill be building up my b44.1 with a new avid chassis , ill be updating this topic as the build goes on. so far... After a very wet race meeting the car was coved in leaves and other bits so it needed a clean, so far I've striped the car down and given it a good clean ready for the chassis that ive ordered from p-dub racing. The only thing is that it wont get sent out till Tuesday as it is a bank holiday in Ireland . this is the car before I cleaned it (sorry for bad picture) this is the track I race on ill up load some more pictures of the car in bits tomz. Edited October 27, 2013 by alex97 Quote Link to comment Share on other sites More sharing options...
BigBadJFly Posted October 28, 2013 Share Posted October 28, 2013 Are the blue associated screws you've got any good? I bought some stainless steel ones from rpc racing and round so easily - its really annoying! BTW I noticed you have a screw missing near the spur on the front top plate Quote Link to comment Share on other sites More sharing options...
Alex97 Posted October 28, 2013 Author Share Posted October 28, 2013 I've only been using then for 3 months and they seem ok, not to sure where that screw has gone lol. Quote Link to comment Share on other sites More sharing options...
BigBadJFly Posted October 28, 2013 Share Posted October 28, 2013 Ok, will get some of those screws then. Thanks Quote Link to comment Share on other sites More sharing options...
Alex97 Posted October 28, 2013 Author Share Posted October 28, 2013 The kit that I used is the tc4 ones and not all the screws are blue just the ones on show Quote Link to comment Share on other sites More sharing options...
THE TECHNICIAN 07 Posted October 29, 2013 Share Posted October 29, 2013 following this one, looking forward to your to your thoughts on it, running a 44.1 myself and would love a .2 but cant justify the cost for an extra 8mm as i only race indoors on carpet once a week. Quote Link to comment Share on other sites More sharing options...
Alex97 Posted October 29, 2013 Author Share Posted October 29, 2013 Mine will be a bit like a .2 as its the same length. I am planing a 2wd b44 but that will be a little later in the year. Quote Link to comment Share on other sites More sharing options...
Alex97 Posted November 5, 2013 Author Share Posted November 5, 2013 Its arrived today and I'm really happy with it, I'll post a picture when I'm done as him half way though the build. Quote Link to comment Share on other sites More sharing options...
The Dark Knight Posted November 7, 2013 Share Posted November 7, 2013 Looking forward to see-ing this chassis, they look amazing! Quote Link to comment Share on other sites More sharing options...
Alex97 Posted November 7, 2013 Author Share Posted November 7, 2013 almost done I just need to get another blue screw for the topdeck. I was in to minds about buying the chassis with the high price tag but im really happy with it so far. I just like to say thanks for p-dub for holding the conversion kit for me while the chassis came in to stock. 1 Quote Link to comment Share on other sites More sharing options...
Alex97 Posted November 7, 2013 Author Share Posted November 7, 2013 and ive added thinker shock towers to the b44.1 as they are known for breaking. Quote Link to comment Share on other sites More sharing options...
Alex97 Posted November 10, 2013 Author Share Posted November 10, 2013 First run with the new chassis and wow what a differents the car jumped great. I finished 3rd overall behind 2 pros and I wasn't that far behind. Quote Link to comment Share on other sites More sharing options...
Alex97 Posted February 8, 2014 Author Share Posted February 8, 2014 I haven't updated this in a long time so here goes. After my last update I carryed on doing very well it and it felt very nice in both the wet and dry using the same set up, I may sometimes put harder springs on the rear when its wet. I was using an xray xb4 2014 and it was just horrible compared to the b44, I know others have had done very well with them. I will start using it again next week :-), I've ordered a new shell and it is currently on its way to RCS so I should have that in around two weeks. I will post a new picture when I get home tomorrow. I am also going to be using a b42 for my 2wd, I should be getting the chassis in 4weeks time due to a large demand. Alex Quote Link to comment Share on other sites More sharing options...
Alex97 Posted February 28, 2014 Author Share Posted February 28, 2014 new shell :-) 1 Quote Link to comment Share on other sites More sharing options...
Alex97 Posted March 7, 2014 Author Share Posted March 7, 2014 Just added some team c bigbore shocks, it feels and look much nicer. Quote Link to comment Share on other sites More sharing options...
wangerman69 Posted March 7, 2014 Share Posted March 7, 2014 Looks good brother I love AE Gear How does it run ? Quote Link to comment Share on other sites More sharing options...
wangerman69 Posted March 7, 2014 Share Posted March 7, 2014 Also where is the track Herts is usually busy with meets every other Sunday so always keen to find a new track to run on Quote Link to comment Share on other sites More sharing options...
Alex97 Posted March 7, 2014 Author Share Posted March 7, 2014 Ok, I was doing much better last year, I've had lots of problems within the last few weeks so I striped it down and added the big bores so I hope that it will help. I was planing to go down to herts Saturday but there's meant to be a big race on Saturday so it will most likely be very busy. Quote Link to comment Share on other sites More sharing options...
wangerman69 Posted March 7, 2014 Share Posted March 7, 2014 Usually it's shut on Meets unless you enter, I did think it was clear this week though will check the calender Quote Link to comment Share on other sites More sharing options...
wangerman69 Posted March 7, 2014 Share Posted March 7, 2014 Its on Sunday so Saturday should be fine 09/03/14 HNMC Winter 13 14 round 9 Westmill Dirt Timed Coming Soon Quote Link to comment Share on other sites More sharing options...
Alex97 Posted March 7, 2014 Author Share Posted March 7, 2014 A few of the people I race with were thinking about going but I think I'll give it a miss, I may go down next weekend Quote Link to comment Share on other sites More sharing options...
wangerman69 Posted March 7, 2014 Share Posted March 7, 2014 This is next weekend may enter the Hyper 7 and ST 16/03/14 BRCA TRUGGY + E-Buggy National Westmill Dirt Info Only 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.