carnageUK Posted March 26, 2015 Share Posted March 26, 2015 gents , anyone use a specky dx4c tx , I have a switch set up issue to turn on/off lights Quote Link to comment Share on other sites More sharing options...
RCbutcher Posted March 26, 2015 Share Posted March 26, 2015 What's the issue? Does your lights have a circuit on the rx to allow remote leds? Just hooking them into the rx will just power them on all the time. Quote Link to comment Share on other sites More sharing options...
carnageUK Posted March 27, 2015 Author Share Posted March 27, 2015 Yep that's what's happening ,lights all on ,, set up switch b to switch aux 2 on/off but no joy , may need somethink else ? Quote Link to comment Share on other sites More sharing options...
Thunderwolf Posted March 27, 2015 Share Posted March 27, 2015 running a dx4s on mine but it more or less the same to set up a aux channel on any spekky system need more info if i'm going to help you out mainly are you using a light control circuit or is it just directly connected from led to rx? if you got a picture that would be great. if you have the leds connected to a connector that plugs into the rx, you will not be able to turn them off, no matter what you do with the tx settings. Quote Link to comment Share on other sites More sharing options...
carnageUK Posted March 27, 2015 Author Share Posted March 27, 2015 Ok thanks , it's not a must have , just got given some lights and thought they would switch on/off via the tx , not going to buy any kit to make them work , I have a inline battery switch that I might fit to be able to switch on/off ,,cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.