Protection cylinder head?

[jamodabest]

How do you protect the cylinder head ?

Ive seen some where there are tubes but i dont know how they make it?

Also ive seen some caps but where can you buy them?

Any other protection on the car you suggest?

Thanks,

Jamie.

[jamodabest]

Also (this is off topic) ive read on the forum that you shudnt use anything over 20% fuel for .21 engines. Im using 25%, is that bad?

[Mailrhj]

I use 30% in my .21, don't know where you've read it's bad coz that's rubbish. Not sure on the head protectors though.

Ross

[jamodabest]

ah good it got me worried then!

Thanks,

Jamie.

[fraggs]

Just use nitro fuel tube and some tie-raps/zip-ties ect thread the tie through the tube then fasten it through the cooling fins on the head and fasten the tie and cut off the excess, job done

[jamodabest]

And nothing will melt or overheat?

Edited April 2, 2010 by jamodabest

[a-x-l-e]

And nothing will melt or overheat?

No, the colour may degrade over time with the heat but otherwise its a nice cheap trick

[Sphinx]

Also (this is off topic) ive read on the forum that you shudnt use anything over 20% fuel for .21 engines. Im using 25%, is that bad?

Thats ok mate to use, any thing between 20% and 25% is ok for .18/.21/.28

Gav