More problems with Hitec servo on Hyper ST pro

[Rick]

Got the Horn to fit on the hitec servo after cutting it down and redrilling larger holes but now the brake rods (being set at different hights) are hitting the top of the servo, if I was to mount them both on the top of the horn then the bottom one would foul the carbon brace.

Is there a bigger off set horn or has any body else built one and taken any pictures of it so I can compare.

Help please, this is going to drive me to drink soon

Edited September 1, 2007 by Rick

[tjpMT2]

dont use the FUTABA servo horn on a HITEC servo they have a different number of splines and you could damage the servo

[Rick]

dont use the FUTABA servo horn on a HITEC servo they have a different number of splines and you could damage the servo

I am using the hitec horn just drilled out to fit and cut down to the size as the one in the kit.

There was three different horns to try in the servo box and they are the ones that i have been using.

I also tried cutting a cross shaped one into a L shape to see if that would help but sadly no joy