vinniejones Posted February 11 Share Posted February 11 Just bought the new dumbo ddf 350 tx Very compact I have a issue with the model I have bound 2 models up on 2 separate model numbers but both models react to the transmitter on both model numbers A bit stuck any advise would be great Manythanks Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted February 11 Share Posted February 11 good luck sorting this, i went for thr x6PM-350 as i did not need multi model , just wanted a couple more channels for my NT4 Unimog, lovely radio 1 Quote Link to comment Share on other sites More sharing options...
vinniejones Posted February 11 Author Share Posted February 11 Thanks lone-wolf IT is a nice compact radio and the rest of the radio is pretty straight forward I was trying to sort it out last night for about 2 hours Tried everything Thanks anyway 1 Quote Link to comment Share on other sites More sharing options...
wombat Posted February 11 Share Posted February 11 Might be like that, my flysky gt3c does that, just have to remember to turn every car off apart from the one I'm using, otherwise they all set off . I have 3 cars bound to the flysky and can use each one on any setting, so your Dumbo could be the same Quote Link to comment Share on other sites More sharing options...
vinniejones Posted February 11 Author Share Posted February 11 2 hours ago, wombat said: Might be like that, my flysky gt3c does that, just have to remember to turn every car off apart from the one I'm using, otherwise they all set off . I have 3 cars bound to the flysky and can use each one on any setting, so your Dumbo could be the same H7 447 WOMBAT THANKS FOR THAT WILL TRY Quote Link to comment Share on other sites More sharing options...
JonnyUK Posted February 11 Share Posted February 11 I would have expected any other bound receiver in other rcs to not be powered when using the chosen rc's receiver really. 🤔 Normally you wouldn't have them all fitted with a battery and switched on at the same time. Quote Link to comment Share on other sites More sharing options...
wombat Posted February 11 Share Posted February 11 1 hour ago, JonnyUK said: I would have expected any other bound receiver in other rcs to not be powered when using the chosen rc's receiver really. 🤔 Normally you wouldn't have them all fitted with a battery and switched on at the same time. I have another flysky gt3c and it's the same, if you have 6 cars on one tx and there all switched on, press forwards and they'll all set off. That's why when I change them will be getting Dumbo RC ones👍 Quote Link to comment Share on other sites More sharing options...
JonnyUK Posted February 11 Share Posted February 11 21 minutes ago, wombat said: I have another flysky gt3c and it's the same, if you have 6 cars on one tx and there all switched on, press forwards and they'll all set off. That's why when I change them will be getting Dumbo RC ones👍 I get that but I don't understand why it's a problem. No idea why all the cars would have a battery fitted and all be turned on at the same time. 1 Quote Link to comment Share on other sites More sharing options...
wombat Posted February 11 Share Posted February 11 It's not a problem, was just saying it can happen . I always switch off and remove batteries when I stop using/ change cars. It's sometimes an advantage as you can run one car on another cars settings, as in lower throttle settings if a beginner is using it 1 Quote Link to comment Share on other sites More sharing options...
vinniejones Posted February 12 Author Share Posted February 12 6 hours ago, JonnyUK said: I would have expected any other bound receiver in other rcs to not be powered when using the chosen rc's receiver really. 🤔 Normally you wouldn't have them all fitted with a battery and switched on at the same time. Thanks jonnyuk I did power 2 cars up just to see if they were both connected after 1 car worked on my no 01 and no 2 model list that was the only reason I tried them both but thanks for asking Kev 2 Quote Link to comment Share on other sites More sharing options...
vinniejones Posted February 12 Author Share Posted February 12 14 hours ago, JonnyUK said: I get that but I don't understand why it's a problem. No idea why all the cars would have a battery fitted and all be turned on at the same time. IT'S a problem because the tx holds 10 models and each model has different trims set up Quote Link to comment Share on other sites More sharing options...
JonnyUK Posted February 12 Share Posted February 12 I've got the same transmitter. If you mean the problem is just that it will control all of the other bound RCs at the same time then just make sure only one RC is powered on at a time ie the RC you are driving. If you mean that it doesn't save each trim setting separately for each model on each stored in the transmitter then yes that would be a problem. 1 Quote Link to comment Share on other sites More sharing options...
vinniejones Posted February 12 Author Share Posted February 12 2 hours ago, JonnyUK said: I've got the same transmitter. If you mean the problem is just that it will control all of the other bound RCs at the same time then just make sure only one RC is powered on at a time ie the RC you are driving. If you mean that it doesn't save each trim setting separately for each model on each stored in the transmitter then yes that would be a problem. Jonnyuk Is your ddf-355 working as it should and if it is how did you enter and store the different model numbers Quote Link to comment Share on other sites More sharing options...
JonnyUK Posted February 12 Share Posted February 12 8 minutes ago, vinniejones said: Jonnyuk Is your ddf-355 working as it should and if it is how did you enter and store the different model numbers At the moment I'm only using it for the one petrol RC. Not had it long really. Quote Link to comment Share on other sites More sharing options...
vinniejones Posted February 12 Author Share Posted February 12 34 minutes ago, JonnyUK said: At the moment I'm only using it for the one petrol RC. Not had it long really. OK jonnyuk I've spoke to the company I bought it of luckily UK company and they tell me that there has been a few faulty transmitters a software fault I am waiting to here back will post when I find out 2 Quote Link to comment Share on other sites More sharing options...
JonnyUK Posted February 12 Share Posted February 12 2 hours ago, vinniejones said: OK jonnyuk I've spoke to the company I bought it of luckily UK company and they tell me that there has been a few faulty transmitters a software fault I am waiting to here back will post when I find out They might fix it by issuing a software update, should be quite simple to load it into the transmitter hopefully. I think there is a mini usb on it, no idea if that's to plug it into a computer for updates or to charge a lipo pack though. Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted February 13 Share Posted February 13 9 hours ago, JonnyUK said: They might fix it by issuing a software update, should be quite simple to load it into the transmitter hopefully. I think there is a mini usb on it, no idea if that's to plug it into a computer for updates or to charge a lipo pack though. I think the USB C is to do firmware, i tried charging AA NI-MH on my dumbo and did not appear to work 1 Quote Link to comment Share on other sites More sharing options...
vinniejones Posted February 13 Author Share Posted February 13 12 hours ago, Lone-wolf said: I think the USB C is to do firmware, i tried charging AA NI-MH on my dumbo and did not appear to work OK good evening all The shop that I bought the dumbo of have been in touch with dumbo support Have have been told that the 10 model numbers will store the trims for 10 trucks but unlike my Noble tx where you can go to your model number and that is the only number that will control the truck But on the dumbo fdd 350 all the model numbers will control any truck you have bound to the tx So you must only have 1 off your trucks turned on Hope this helps anyone in the same prediction They have said its a low cost radio and that's why it's like this and built to be like this Manythanks to all who messaged Quote Link to comment Share on other sites More sharing options...
vinniejones Posted February 13 Author Share Posted February 13 22 hours ago, JonnyUK said: They might fix it by issuing a software update, should be quite simple to load it into the transmitter hopefully. I think there is a mini usb on it, no idea if that's to plug it into a computer for updates or to charge a lipo pack though. JonnyUK look at the post I have just posted Thanks Quote Link to comment Share on other sites More sharing options...
wombat Posted February 13 Share Posted February 13 1 hour ago, vinniejones said: OK good evening all The shop that I bought the dumbo of have been in touch with dumbo support Have have been told that the 10 model numbers will store the trims for 10 trucks but unlike my Noble tx where you can go to your model number and that is the only number that will control the truck But on the dumbo fdd 350 all the model numbers will control any truck you have bound to the tx So you must only have 1 off your trucks turned on Hope this helps anyone in the same prediction They have said its a low cost radio and that's why it's like this and built to be like this Manythanks to all who messaged Glad you got a result, sounds like it operates like the flysky gt3c. 👍 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.