Moki Posted July 24, 2023 Share Posted July 24, 2023 Hello I have recently brought a lunchbox kit it was my first built and everything was going good. To make sure all of the electricals were working I connected the battery 5000nimh 7.2v to receiver, ESC, motor and servo. My problem starts here the remote control will power the motor but the servo will not move I’ve tried putting the connectors into the opposite ones but to no avail. Can someone please help Quote Link to comment Share on other sites More sharing options...
Bajadre Posted July 25, 2023 Share Posted July 25, 2023 which channel port have you put servo lead in on ESC buddy ? also check the tiny tab on end of servo lead as they can fit both ways with force and needs to be right way etc maybe post up a close up pic if possible so we can advice 👍 3 Quote Link to comment Share on other sites More sharing options...
Gampla Posted July 27, 2023 Share Posted July 27, 2023 Notched end will always be signal if it doesn't work get hold of the store you brought it they will generally rma it and send you a new one 2 Quote Link to comment Share on other sites More sharing options...
wombat Posted July 27, 2023 Share Posted July 27, 2023 Have you checked that the servo is a good one, might sound obvious but I swapped a servo recently to try and solve a problem, which threw me for a while until i realised the new servo was faulty 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.