Popular Post Blast and Cruise Posted February 19, 2022 Popular Post Share Posted February 19, 2022 Did a little wrenching Swopped out stock motor mount for the Big Block mount and flipped it around. moved the RX box to the other side of chassis Installed new Carbon brace to suit the new motor mount Hopefully i did it all correctly, that Fat Can 5687 is So big it touches the chassis, i may put a little double sided tape to stop it making contact, otherwise im done for today. Beer a clock time for me, cheerz. 5 Quote Link to comment Share on other sites More sharing options...
ninjagaiden Posted February 19, 2022 Share Posted February 19, 2022 Nice! That spur gear is tiny mate. How fast is that thing going to go? 1 Quote Link to comment Share on other sites More sharing options...
Blast and Cruise Posted February 19, 2022 Author Share Posted February 19, 2022 hi ninja thats a 34t spur, i cant get anywere near it with the 25t pinion ive got, so i have to run a 34t spur with 34t pinion, if im going to use this particular motor. the speed is estimated at 142mph with 1100kv with the 1650 speed is estimated at 172mph and the Spektrum 1250kv will be around 130mph not 100% what motor im going with, but for now ive got the 1100kv in there Quote Link to comment Share on other sites More sharing options...
GMballistic Posted February 19, 2022 Share Posted February 19, 2022 1 minute ago, Blast and Cruise said: hi ninja thats a 34t spur, i cant get anywere near it with the 25t pinion ive got, so i have to run a 34t spur with 34t pinion, if im going to use this particular motor. the speed is estimated at 142mph with 1100kv with the 1650 speed is estimated at 172mph and the Spektrum 1250kv will be around 130mph not 100% what motor im going with, but for now ive got the 1100kv in there I'd personally start with a smaller pinion gear if you can and then gear up as you go to make sure you can get it to run straight & handle as you want first. Be a shame to wreck it first time out as I've actually seen it done before. Think you should ask to have this thread moved to the "High Speed" sub section where it belongs. 1 Quote Link to comment Share on other sites More sharing options...
Blast and Cruise Posted February 19, 2022 Author Share Posted February 19, 2022 thanks GM, will do 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 19, 2022 Share Posted February 19, 2022 I’ll move it if you want? 1 1 Quote Link to comment Share on other sites More sharing options...
Blast and Cruise Posted February 19, 2022 Author Share Posted February 19, 2022 thankyou AJ. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.