dubnut1 Posted June 25, 2019 Share Posted June 25, 2019 Hi everyone, just wondering if anyone has shortened the wheelbase on an scx10 ii to 275mm ? Any information would be greatly appreciated. 👍😉 Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted June 25, 2019 Share Posted June 25, 2019 It's mostly in the links and clocking the axles so the angle of the propshafts doesn't become too severe. Not too difficult to do, just a bit of trial and error. Quote Link to comment Share on other sites More sharing options...
dubnut1 Posted June 26, 2019 Author Share Posted June 26, 2019 Are there any how two's on here to give me some guidance? Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 28, 2019 Share Posted June 28, 2019 It’s a fairly straight forward job chap. have a look on YouTube and go from there, you can recycle your rod ends or go for some Traxxas ones (been excellent over the years) then some 3/4mm threaded bar and a tube of aluminium tube 6mm od and 4mm inside diameter. as long as you have means to cut both bar a tube, should be a relatively easy job. ideally the axles won’t want clocking too much (front especially) although you can get away with more on the rear. now, depending on what driveshafts you have fitted will determine if it then binds with the more severe driveshaft angles. the design of the Rc4wd punisher shafts are the way to go, these handle the more extreme angles too. hope this helps a bit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.