Mr.wiggins Posted January 15, 2019 Share Posted January 15, 2019 I need help figuring out what to do my instruction manual says set lv to 3.4v all is set. I have 2 nano-tech 2s 4200mah 25c Lipo batteries in series in a bashers sabertooth 1/8 truggy with a wp8-bl100a esc and at full power the truggy or receiver just shuts down and boots back up again causing me to wreck my truggy can anyone help me with this problem its a brand new truggynever made it thru it's first run Quote Link to comment Share on other sites More sharing options...
jea Posted January 15, 2019 Share Posted January 15, 2019 the problem may be your battery's 4200mah 25c is only 105amps constant . so you may be getting voltage drop under full load .. 1 Quote Link to comment Share on other sites More sharing options...
Mr.wiggins Posted January 15, 2019 Author Share Posted January 15, 2019 Ok so I need 50c 5000mah batteries Quote Link to comment Share on other sites More sharing options...
Tug Posted January 15, 2019 Share Posted January 15, 2019 For what they cost, it's worth a shot. 1 Quote Link to comment Share on other sites More sharing options...
PH001 Posted January 16, 2019 Share Posted January 16, 2019 Also make sure your wiring is 10AWG where you can and I'd be tempted to switch your connectors over to XT90. You could of course just set your LVC lower than 3.4V which is higher than required really. I would set it to 3.2V or even 3.0V. Quote Link to comment Share on other sites More sharing options...
Mr.wiggins Posted January 17, 2019 Author Share Posted January 17, 2019 Gentlemen thanks for all the help I've installed a different radio system big big difference much better now God? bless and keep Rcing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.