Etronix Photon 2.1 Compatible with Skyrc Toro Program Card??

[Matt_UK_007]

Just ordered the Etronix Photon 2.1 program card from RC Model Shop Direct and they’ve sent me a Skyrc Toro program card ?

 

Assumed it was compatible with my new Photon 2.1 60amp esc but just tried it and no joy. Just 1 light came up and that was it. 

 

Am I missing something or have they sent me the wrong one? 

 

 

[dazp1976]

There's 2 card types.

One like the skyrc so should be compatible but does say 2.0.

My Etronix looks like this and says 2.1

 

My reckoning is you need the latter one.

[Matt_UK_007]

Ah thanks Daz I reckon you’re right. I’ll get back to the shop and see if they can do a swap. 

[b_hawk111]

I may have one of those photon program cards, I'll check my bin later and see if I have already chucked it or not! 

[Matt_UK_007]

On 22/04/2018 at 13:12, b_hawk111 said:

I may have one of those photon program cards, I'll check my bin later and see if I have already chucked it or not! 

 

Hey mate I popped into the rcmd yesterday and they swapped the card for the official chunky blue one and I’m up and running!

 

Messed with the settings and got rid of the bad cogging so I’m ready to run after 12 months out of action! Good times  ?

[b_hawk111]

That's all good as I threw mine in the bin already!! 

 

Nice one, my escape was pretty good till I got it hot and wet and it died