frostic Posted June 2, 2016 Share Posted June 2, 2016 (edited) Planning on getting rid of all of my RC parts & cars, as since moving house i just haven't had the time to use any of it. Keep an eye on the thread as i'll keep updating it as i get bits out. Prices do NOT include P&P, and buyer is to pay fees if paying by PayPal. Collection welcome from Dunstable. X1CR Pro brushless converted £200 Comes with 3 batteries, controller and charger. Basically everything you need to get going. Motor is LRP Dynamic 8 2200kv and ESC is LRP iX8 Broken X1CRT roller. Shocks are there but not mounted, as is battery box and metal servo tray thing. Front arm broke last time i took it out and then i gave up on it and built the electric X1CR you also see for sale here. £SOLD Metal bits, £2 each 1) SOLD 2) SOLD 3) 4) SOLD Carbon looking bit from X1CR Pro £SOLD: CNC Metal bits, £SOLD: 1) 2) Plastic sets, £3 each set: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Note these are x1crT arms for the truggy, not buggy. Not sure if front or rear but it's a matching pair: 12) Nitro engines; not been run in over a year (converted to electric) so no idea what state they're in. £3 each: 1) 2) Nitro pipe from 1/8 buggy. £2: Clutch bells. £1 each: Edited June 6, 2016 by frostic Quote Link to comment Share on other sites More sharing options...
capri-boy Posted June 2, 2016 Share Posted June 2, 2016 Hi chap, pending you having other bits suitable I'd like no 9. - the diff case. Quote Link to comment Share on other sites More sharing options...
frostic Posted June 3, 2016 Author Share Posted June 3, 2016 Which bits are you after in particular? Can have a dig through for those first if you want. Quote Link to comment Share on other sites More sharing options...
capri-boy Posted June 3, 2016 Share Posted June 3, 2016 7 minutes ago, frostic said: Which bits are you after in particular? Can have a dig through for those first if you want. Cheers bud, it's just that a single diff case plus the inevitable small parcel postage cost makes it the same price as buying one new new. I run two X1's - Cr Pro and CRT Pro, both E conversions - I need a couple diff cases though would take upto four, and shock rebuild parts for the later 16mm big bores. Price dependent I'd take upper / lower arms and hubs as spares, otherwise nothing specific at this point I don't think. C Quote Link to comment Share on other sites More sharing options...
frostic Posted June 3, 2016 Author Share Posted June 3, 2016 Gimme a few mins... Bunch of other stuff i'm taking pics of now. Got lots of shock bits too but no idea how to tell if they're for big bore or normal as I have both. 1 Quote Link to comment Share on other sites More sharing options...
frostic Posted June 3, 2016 Author Share Posted June 3, 2016 @capri-boy is this the right thing for big-bore shocks? Pics are next to normal shocks: Quote Link to comment Share on other sites More sharing options...
Carpmart Posted June 3, 2016 Share Posted June 3, 2016 Hello im after a couple of truggy body mount plastic pieces... Have you got a couple please? Quote Link to comment Share on other sites More sharing options...
capri-boy Posted June 3, 2016 Share Posted June 3, 2016 43 minutes ago, frostic said: @capri-boy is this the right thing for big-bore shocks? Pics are next to normal shocks: Thanks, they do look like the newer 16mm shock bottoms. Unfortunately I need shafts / o rings / plastic collets / bladders for rebuilds - i'm good for the shock bottoms / shaft ends etc. If you've another diff case then that would make postage viable. Quote Link to comment Share on other sites More sharing options...
mayzie12 Posted June 3, 2016 Share Posted June 3, 2016 Would you do a deal on all the CNC bits, the carbon part, metal parts and the roller? Cheers Quote Link to comment Share on other sites More sharing options...
capri-boy Posted June 3, 2016 Share Posted June 3, 2016 Thanks chap, I'll take the CRT Roller, cnc towers if still avail, diff case, rear hubs, front C hub and crt arms please. My hermes is prob the most cost effective postage solution if that's doable for you? 5 hours ago, frostic said: @capri-boy is this the right thing for big-bore shocks? Pics are next to normal shocks: Quote Link to comment Share on other sites More sharing options...
frostic Posted June 3, 2016 Author Share Posted June 3, 2016 6 hours ago, Carpmart said: Hello im after a couple of truggy body mount plastic pieces... Have you got a couple please? Not got any of those, sorry. 1 hour ago, capri-boy said: Thanks chap, I'll take the CRT Roller, cnc towers if still avail, diff case, rear hubs, front C hub and crt arms please. My hermes is prob the most cost effective postage solution if that's doable for you? Yeah sure, so that's total £50 + P&P + PayPal fees if paying with paypal. Hermes is fine, just have to get it all packed and weighed so i can give you a proper price. You realise the CRT is broken yeah? Just want to make it clear before i post and find you didn't realise - The front arm on one side is broken, the shocks aren't mounted and i'm not sure if the little plastic mounts are even with it, would have to check. The dogbones/cups aren't mounted, although I'll dig them out and include them. It's literally as you see it in the pics. I've got a bunch of other plastics, mostly buggy arms/hubs but they're loose (Not sets). Also spring sets/wheel sets/pinions and maybe a few other bits if you're interested in any of that before i pack all this together? Got so much stuff it's unreal and it all needs to go. Quote Link to comment Share on other sites More sharing options...
frostic Posted June 3, 2016 Author Share Posted June 3, 2016 4 hours ago, mayzie12 said: Would you do a deal on all the CNC bits, the carbon part, metal parts and the roller? Cheers Somehow missed your post - Really sorry. CNC + Roller is probably gone to Capri-boy. If you still want other metal parts & the carbon bit lemme know and i'll sort it. Quote Link to comment Share on other sites More sharing options...
capri-boy Posted June 3, 2016 Share Posted June 3, 2016 1 hour ago, frostic said: Not got any of those, sorry. Yeah sure, so that's total £50 + P&P + PayPal fees if paying with paypal. Hermes is fine, just have to get it all packed and weighed so i can give you a proper price. You realise the CRT is broken yeah? Just want to make it clear before i post and find you didn't realise - The front arm on one side is broken, the shocks aren't mounted and i'm not sure if the little plastic mounts are even with it, would have to check. The dogbones/cups aren't mounted, although I'll dig them out and include them. It's literally as you see it in the pics. I've got a bunch of other plastics, mostly buggy arms/hubs but they're loose (Not sets). Also spring sets/wheel sets/pinions and maybe a few other bits if you're interested in any of that before i pack all this together? Got so much stuff it's unreal and it all needs to go. Hi chap, it's hard to tell off the pics but I understand the condition - broken front arm, shocks loose and centre dogbones / cups not present - otherwise a roller as seen. If you had the missing bits that would be awesome, if not it's ok. Other bits you mention i'm always short of Mod 1 pinions, and new plastics, even half a set are always useful, i'm in no rush so when you know what you've got let me know and we can go from there. However I think Mayzie asked before me so if your happy I'd prefer he had first refusal on the roller and cnc towers etc. 5 hours ago, mayzie12 said: Would you do a deal on all the CNC bits, the carbon part, metal parts and the roller? Cheers 3 Quote Link to comment Share on other sites More sharing options...
mayzie12 Posted June 3, 2016 Share Posted June 3, 2016 4 hours ago, capri-boy said: Hi chap, it's hard to tell off the pics but I understand the condition - broken front arm, shocks loose and centre dogbones / cups not present - otherwise a roller as seen. If you had the missing bits that would be awesome, if not it's ok. Other bits you mention i'm always short of Mod 1 pinions, and new plastics, even half a set are always useful, i'm in no rush so when you know what you've got let me know and we can go from there. However I think Mayzie asked before me so if your happy I'd prefer he had first refusal on the roller and cnc towers etc. Top Bloke If its just the diff cases you need off it I'll happily take them off the roller and post them to you at cost. Cheers Quote Link to comment Share on other sites More sharing options...
frostic Posted June 4, 2016 Author Share Posted June 4, 2016 10 hours ago, mayzie12 said: Top Bloke If its just the diff cases you need off it I'll happily take them off the roller and post them to you at cost. Cheers Which metal bits did you want Mayzie? Theres quite a few there. Quote Link to comment Share on other sites More sharing options...
mayzie12 Posted June 4, 2016 Share Posted June 4, 2016 18 hours ago, frostic said: Somehow missed your post - Really sorry. CNC + Roller is probably gone to Capri-boy. If you still want other metal parts & the carbon bit lemme know and i'll sort it. Metal parts 1,2 and 4. CNC parts 1 and 2. Then roller + carbon bit Cheers Quote Link to comment Share on other sites More sharing options...
frostic Posted June 4, 2016 Author Share Posted June 4, 2016 4 hours ago, mayzie12 said: Metal parts 1,2 and 4. CNC parts 1 and 2. Then roller + carbon bit Cheers Do you want all the metal bits from 1 and 4? If so that's 7x metal bits, 2x CNC, 1xCarbon and the roller = £55. Do you want me to get a price for postage or you planning to collect? Quote Link to comment Share on other sites More sharing options...
mayzie12 Posted June 4, 2016 Share Posted June 4, 2016 1 hour ago, frostic said: Do you want all the metal bits from 1 and 4? If so that's 7x metal bits, 2x CNC, 1xCarbon and the roller = £55. Do you want me to get a price for postage or you planning to collect? Yes that is the parts, just get me a price including by postage and fees and it should be simpler Quote Link to comment Share on other sites More sharing options...
frostic Posted June 4, 2016 Author Share Posted June 4, 2016 1 hour ago, mayzie12 said: Yes that is the parts, just get me a price including by postage and fees and it should be simpler Fees are £2.14. If you pay me £57.14 by PayPal, I'll cover the cost of first class postage? Quote Link to comment Share on other sites More sharing options...
mayzie12 Posted June 4, 2016 Share Posted June 4, 2016 Sounds good to me PM your paypal and ill get it over tonight Cheers Quote Link to comment Share on other sites More sharing options...
frostic Posted June 6, 2016 Author Share Posted June 6, 2016 BUMP. First post updated to reflect what's sold. Quote Link to comment Share on other sites More sharing options...
frostic Posted June 7, 2016 Author Share Posted June 7, 2016 BUMP. Quote Link to comment Share on other sites More sharing options...
frostic Posted June 30, 2016 Author Share Posted June 30, 2016 BUMP. Quote Link to comment Share on other sites More sharing options...
frostic Posted July 9, 2016 Author Share Posted July 9, 2016 TTT. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.