Gaz! Posted June 1, 2016 Share Posted June 1, 2016 Hi as above, got a losi 5ive mini shell/cage and wheels/tyres. ideally I would like to swap or p/ex my stuff for a 5t shell/cage, wheels and tyres and both front and rear bumpers. now the front bumper on the shell is well used but still loads of life in it. (Please study pics) the n/s rear window has been cut out so it can be started without the shell off. main section is spot on with a few marks only, rear bumper is not as bad as front but still very usable. wheels and tyres are in real good condition, had 4 tanks through it now. now I'm not fussy if it's a km shell and wheels etc. Stock stuff is fine too. as I state, I require a swap but for the forum rules I'll say £250 all in. thanks, gaz. Quote Link to comment Share on other sites More sharing options...
Carpmart Posted June 1, 2016 Share Posted June 1, 2016 Hi Gaz FYI, the shells are all cut to allow access as standard the pull start. If you just swap the shells and bumper without swapping the driveshafts and arms, everyone will end up with the wrong offset for their shells. The mini is a narrower track than the truck. HTH's? Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 1, 2016 Author Share Posted June 1, 2016 Thanks mate, so after the full job lot to convert it over then please. all the arms, driveshafts and turnbuckles are in excellent condition too. can meet up too within reasonable distance..... Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 2, 2016 Author Share Posted June 2, 2016 Bump. Quote Link to comment Share on other sites More sharing options...
Smudge053 Posted June 2, 2016 Share Posted June 2, 2016 Hi gaz, I am splitting a Losi 5ive and have placed the bits all on eBay you may get all the bits you need cheapish. link to my listings. http://www.ebay.co.uk/itm/331868710127?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 2, 2016 Author Share Posted June 2, 2016 Thanks mate, already on it Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 5, 2016 Author Share Posted June 5, 2016 Bump. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 6, 2016 Author Share Posted June 6, 2016 Bump. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 7, 2016 Author Share Posted June 7, 2016 Bump, anyone? will sell too if needs be.... Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 9, 2016 Author Share Posted June 9, 2016 Bump. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 13, 2016 Author Share Posted June 13, 2016 Bump, anyone??? Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 14, 2016 Author Share Posted June 14, 2016 Bump. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 17, 2016 Author Share Posted June 17, 2016 Bump. nobody want to offer? Quote Link to comment Share on other sites More sharing options...
coolkev48 Posted June 17, 2016 Share Posted June 17, 2016 Quote hi mate would u sell the cage with the bumper holders on Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 17, 2016 Author Share Posted June 17, 2016 All the bits in the shell? Or the mounts on the chassis? i would prefer the shell and cage go together to be honest.... Quote Link to comment Share on other sites More sharing options...
coolkev48 Posted June 18, 2016 Share Posted June 18, 2016 ok mate I would like the cage in the shell if u do decide to break it many thanks for reply Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 19, 2016 Author Share Posted June 19, 2016 I'll let you know should I choose to split them. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 21, 2016 Author Share Posted June 21, 2016 Bump.... Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 23, 2016 Author Share Posted June 23, 2016 Bump, £100 for the shell and cage, £60 for the wheels and tyres. prices do NOT inc. postage and fees. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 27, 2016 Author Share Posted June 27, 2016 Bump. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted June 30, 2016 Author Share Posted June 30, 2016 Bump, anyone? Quote Link to comment Share on other sites More sharing options...
Gaz! Posted July 4, 2016 Author Share Posted July 4, 2016 Bump. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted July 7, 2016 Author Share Posted July 7, 2016 Bump. anyone out there? Quote Link to comment Share on other sites More sharing options...
Gaz! Posted July 8, 2016 Author Share Posted July 8, 2016 Bump. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted July 9, 2016 Author Share Posted July 9, 2016 Any offers at all? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.