Gwigga Posted March 23, 2015 Share Posted March 23, 2015 Any one have experiences good / bad with Abisma TX/RX http://www.modelsport.co.uk/absima-cr3p-afhds-2.4ghz-3-channel-radio-system/rc-car-products/372690 Quote Link to comment Share on other sites More sharing options...
Hyper-d Posted March 23, 2015 Share Posted March 23, 2015 Had one for two years now and can't fault it.good value tx. Have a look at the flysky gt3b.basically the same tx just with different styling. Cr3p looks better IMO 1 Quote Link to comment Share on other sites More sharing options...
shaunm Posted March 23, 2015 Share Posted March 23, 2015 Had one since last june very pleased with it, no problems with range i use the flysky compatable rx about 1 Quote Link to comment Share on other sites More sharing options...
daveyboi73 Posted March 29, 2015 Share Posted March 29, 2015 Had mine for two or so years then it broke.The pins and spring mechanism in the steering assembly snapped,leaving steering inoperable.I put it down to heavy use though .Other ise a good unit Quote Link to comment Share on other sites More sharing options...
Hyper-d Posted March 29, 2015 Share Posted March 29, 2015 Had mine for two or so years then it broke.The pins and spring mechanism in the steering assembly snapped,leaving steering inoperable.I put it down to heavy use though .Other ise a good unit I don't suppose you still have it do you? Quote Link to comment Share on other sites More sharing options...
daveyboi73 Posted March 29, 2015 Share Posted March 29, 2015 Actually i think i do. Quote Link to comment Share on other sites More sharing options...
Hyper-d Posted March 29, 2015 Share Posted March 29, 2015 Actually i think i do. Do u wanna sell it? Quote Link to comment Share on other sites More sharing options...
daveyboi73 Posted March 29, 2015 Share Posted March 29, 2015 send me a pm fella Quote Link to comment Share on other sites More sharing options...
r083rtd Posted March 30, 2015 Share Posted March 30, 2015 its probably the best Quote Link to comment Share on other sites More sharing options...
Cherry Posted March 30, 2015 Share Posted March 30, 2015 Just read that Absima is the new name for Ansmann's entry level stuff. Must admit it is a good looking Tx, saw it online and I'd probably go for it if I didn't have my Flysky. Quote Link to comment Share on other sites More sharing options...
Gwigga Posted March 30, 2015 Author Share Posted March 30, 2015 Ordered this now. Wil post a review when I get it as it's going in my inferno, Quote Link to comment Share on other sites More sharing options...
Gwigga Posted April 8, 2015 Author Share Posted April 8, 2015 Right little help required the manual is quite vague on the binding process and have tried every whihc way but still no joy theres also a note on the fact the've switched the bind and vcc plugs round, tried that and still no joy any one do a quick step guide please :smthumbup: Quote Link to comment Share on other sites More sharing options...
shaunm Posted April 8, 2015 Share Posted April 8, 2015 Right little help required the manual is quite vague on the binding process and have tried every whihc way but still no joy theres also a note on the fact the've switched the bind and vcc plugs round, tried that and still no joy any one do a quick step guide please :smthumbup: Plug the bind cable into the rx turn on the power to the rx, make sure your motor is disconnected if its electric you dont want tyre marks on the carpet, then hold down the bind button on the tx its the centre one of the three, whilst holding down the centre button turn on the power on the tx, the led light on the rx which was flashing should go solid this means your done, switch everything off unplug the bind cable reconnect your motor switch it all back on and your good to go! Hope that helps. 1 Quote Link to comment Share on other sites More sharing options...
Gwigga Posted April 10, 2015 Author Share Posted April 10, 2015 Sorted this now.... Didn't have a hump back so used the 4 aa's didn't work changed for my other hump back working fine Quote Link to comment Share on other sites More sharing options...
Gwigga Posted April 21, 2015 Author Share Posted April 21, 2015 Just an update All working now, awesome TX and definatly worth the pennies Quote Link to comment Share on other sites More sharing options...
shdaxner Posted April 21, 2015 Share Posted April 21, 2015 I used one for nearly a year....had issues with it glitching, loss of signal and the range so I got a Flysky GT3C....again, had issues with glitching, loss of signal and range so ended up buying a Spektrum DX4C which has been perfect...no problems at all, feels much better in the hand, I now feel confident enough in my radio gear to drive to the other side of the field and not be worried about having temporary loss of signal. Quote Link to comment Share on other sites More sharing options...
Gwigga Posted April 22, 2015 Author Share Posted April 22, 2015 I used one for nearly a year....had issues with it glitching, loss of signal and the range so I got a Flysky GT3C....again, had issues with glitching, loss of signal and range so ended up buying a Spektrum DX4C which has been perfect...no problems at all, feels much better in the hand, I now feel confident enough in my radio gear to drive to the other side of the field and not be worried about having temporary loss of signal. I think they may have solved this problem with the switching of some plugs on the receiver, battery and bind plug are switched Quote Link to comment Share on other sites More sharing options...
Apperley73 Posted February 2, 2019 Share Posted February 2, 2019 Just got my second one I've had, just set it up with my rx. Seem than evertime I turn on tx it's put my Steering servo back to Normal and not Rev? I sent it up first time and was OK while tx was on never had this issue before. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.