lefteris33 Posted March 21, 2019 Share Posted March 21, 2019 Is anyone else having issues with the latest driveshafts 0083n cuting the lower pin on the joint? Quote Link to comment Share on other sites More sharing options...
lefteris33 Posted March 22, 2019 Share Posted March 22, 2019 I did this today to stop cups from tearing apart. Filled with permatex cold weld epoxy and bronze sleeve 1 Quote Link to comment Share on other sites More sharing options...
TheDriver Posted March 31, 2019 Share Posted March 31, 2019 (edited) I need a new pair of 3s lipo for this after my old floureons failed me. What would people recommend to run this. Been looking on Hobbyking but im not sure what "c" is needed. 5-6000 mAh @30C or do i need to go higher. Any recommendations ? are these ok? https://hobbyking.com/en_us/zippy-flightmax-5800mah-3s1p-30c.html Edited March 31, 2019 by TheDriver Quote Link to comment Share on other sites More sharing options...
Jumper Posted March 31, 2019 Share Posted March 31, 2019 16 minutes ago, TheDriver said: I need a new pair of 3s lipo for this after my old floureons failed me. What would people recommend to run this. Been looking on Hobbyking but im not sure what "c" is needed. 5-6000 mAh @30C or do i need to go higher. Any recommendations ? are these ok? https://hobbyking.com/en_us/zippy-flightmax-5800mah-3s1p-30c.html yes, those will be fine as long as they fit in your battery trays Quote Link to comment Share on other sites More sharing options...
TheDriver Posted May 14, 2019 Share Posted May 14, 2019 Still pondering about a pair of 3s for this mte. Is the 29mm battery tray a standered size? Can i fit a bigger tray or mod the stock one. Its just theres more choice/bigger bats available if i can fit wider lipo.. Thanks Quote Link to comment Share on other sites More sharing options...
Jumper Posted July 28, 2020 Share Posted July 28, 2020 Has anyone tried to do a mt plus 2 conversion on one of these? The arms, upper links, steering and driveshafts would need to be replaced but it would make the truck super wide. I wonder if it would allow bottoming out of the chassis as well. Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted July 28, 2020 Author Share Posted July 28, 2020 1 hour ago, Jumper said: Has anyone tried to do a mt plus 2 conversion on one of these? The arms, upper links, steering and driveshafts would need to be replaced but it would make the truck super wide. I wonder if it would allow bottoming out of the chassis as well. It would be too wide you’d end up with a truck wider than longer 😂 Quote Link to comment Share on other sites More sharing options...
Jumper Posted July 28, 2020 Share Posted July 28, 2020 1 hour ago, mydoddy69 said: It would be too wide you’d end up with a truck wider than longer 😂 yeah it might be very square. how much wider is the new truck? Quote Link to comment Share on other sites More sharing options...
ragejono Posted October 5, 2020 Share Posted October 5, 2020 Hey guys . Here's my Hyper MT plus 2 ! . Its an absolute weapon ! . Has anyone else got one !? . Am selling mine as it's too big and heavy for me to carry to bash spots but it's a shame as it's a beast of a truck ! . My for sale add is in the for sale section ! . Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted May 21, 2023 Share Posted May 21, 2023 Bought myself the MT2 Taking it out for the first time today with the MT1 😁 Fingers crossed it doesn't break. 2 Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted May 21, 2023 Share Posted May 21, 2023 Did the pinion and spur on the MT1 (over tightened the slipper🥲) MT2 went home working, although definitely wants some tweaking, gets a horrible speed wobble, and the motor gets pretty hot, it's not meant for speed laps, but I won't accept no for an answer. So might look at a different motor in the future. Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted July 26, 2023 Share Posted July 26, 2023 Changed the motor and ESC, got a max 6 and a 4292 can in it. Motor and ESC much cooler, batteries arn't getting hot either. Thing flies on 6s. However now the gearbox is cooking, temp gun showed it as 100c. Being plastic that won't last long. Wheels aren't balanced well, it wobbles like jelly on WOT, so would be nice to find some others that are a similar size, but belted? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.