Team durango dex210 bouncy shocks?

[Hpivorza2014]

Hi all I have a dex210 I love it but the bear shocks seem to be bouncing round the corners I have tried the preload in all positions and believe it has 45 shock oil can anyone help please

[jordan_bench10]

Stiffer springs fella

[Alex97]

45 for most tracks is way to high, I only run 30 with 1.8 losi springs on the rear of my b5m.

[Hpivorza2014]

So what do u think I need to do to stop it bouncing

[Alex97]

Try the setup above.

[Hpivorza2014]

Will do thanks

[Alex97]

What's the current springs you are running?

[Hpivorza2014]

I'm couldn't tell you I think there stock but I bought it second hand

[Si Coe]

For Bury you want kit springs, 30wt oil at the back, 35 at the front. Middle hole at the top, outside hole at the bottom front and rear. I'd suggest about 5mm of preload on the shocks to start with.

Come look over mind if you need setup help as its pretty dialed. I know there are a lot of aftermarket parts but the basic setup is still a good starting place. This setup works well on high grip tracks, so its OK for carpet, or Southports mixed surface too. When we go inside over winter it needs changing as the floor is quite slippery.

See you next meeting (next weekend not tomorrow).

[Hpivorza2014]

What are kit springs ?

[Alex97]

Have a look at the manual.

[Hpivorza2014]

Ok will do

[Si Coe]

Kit springs are the ones the car comes with. I doubt they will have been changed

[Hpivorza2014]

Is there a race at the bury track tomorrow or not

[Hpivorza2014]

How much rebound would u say si

[Si Coe]

No racing at Bury this week but there will be next week.

 

Its best to have a feel of the setup of my car when you are there because numbers mean little.

[Hpivorza2014]

Ok mate thanks