AX10 Posted April 20, 2014 Share Posted April 20, 2014 Hi Folks. I've had my Poison Spider a while now and it was delivered 'Ready to Run'. Facing the rear, and looking down, the drive from the gearbox is on the left. Both my diffs are on the right, causing the prop shafts to connect at an angle, i.e. 'cross over'. Looking at the manual, and indeed some Wraith pictures on MODELSPORT, they show the diffs on the left, giving a straight drive for the prop shafts! Is it just my Wraith, what's going on here? Any help or light you can shed would be most appreciated. Thanks Ray Quote Link to comment Share on other sites More sharing options...
.AJ. Posted April 20, 2014 Share Posted April 20, 2014 Sounds like it was put together wrong from the factory, you need to flip the axles to get the transmission as straight as possible Quote Link to comment Share on other sites More sharing options...
rawalker666 Posted April 20, 2014 Share Posted April 20, 2014 very strange here is the underside off mine the gearbox will only go in one way cos off the interior and 1 Quote Link to comment Share on other sites More sharing options...
AX10 Posted April 20, 2014 Author Share Posted April 20, 2014 Thanks mate. I'll need to swap front to rear to achieve that. It's been working fine but I am trying to copy the short Wraith look and my props were having none of it. That's how I noticed. Once again, thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.