JimO Posted September 20, 2013 Share Posted September 20, 2013 (edited) Have got this to sell, its from a FG marder. I know a bit about these but not 100% sure what parts i have and what its worth or whether to sell on here or ebay it. Is this list/spec correct: -26cc engine (is that a zenoah) -Standard exhaust -Gears? (are these specific to a marder? Should i take them off?) I thought the guy i bought it from mentioned he had upgraded something to do with gears? -Air filter -Walbro Carb (do i need to list a model number etc?) -Pullstart -Alloy engine mount (think this is correct, again the seller told me this, i presume its the bit underneath) Anything else i should note? ] Edited September 20, 2013 by JimO Quote Link to comment Share on other sites More sharing options...
dwarfy Posted September 20, 2013 Share Posted September 20, 2013 Yes its a 26cc Zenoah. Exhaust is standard Gears are standard and not uprated so will probably be 18/46 but count the teeth. He may have changed the ratio to 20/44 and that is what he means by uprated! Air filter looks like standard FG so is a decent filter (looking at 3rd pic down) The carb reference should be stamped on the under side Pull start looks standard Small engine mount only is alloy. The more important large engine mount is still plastic. You also have a lexan gear cover which you could sell separate and should see you a tenner for it. Selling it with the engine wont make any difference to the engine price. Do you have another engine for your marder? Quote Link to comment Share on other sites More sharing options...
dwarfy Posted September 20, 2013 Share Posted September 20, 2013 (edited) ........... Edited September 20, 2013 by dwarfy Quote Link to comment Share on other sites More sharing options...
JimO Posted September 20, 2013 Author Share Posted September 20, 2013 Nah, its my only engine, have decided to split the whole car so will be selling everything. Thanks for advice. Air filter is an FG one as i remember replacing it, also have a spare filter. Quote Link to comment Share on other sites More sharing options...
KORB Posted September 20, 2013 Share Posted September 20, 2013 Yes its a 26cc Zenoah. Exhaust is standard Gears are standard and not uprated so will probably be 18/46 but count the teeth. He may have changed the ratio to 20/44 and that is what he means by uprated! Air filter looks like standard FG so is a decent filter (looking at 3rd pic down) The carb reference should be stamped on the under side Pull start looks standard Small engine mount only is alloy. The more important large engine mount is still plastic. You also have a lexan gear cover which you could sell separate and should see you a tenner for it. Selling it with the engine wont make any difference to the engine price. Do you have another engine for your marder? How do you know its a 26cc? it could be a 23cc ? Quote Link to comment Share on other sites More sharing options...
ant b 4 Posted September 20, 2013 Share Posted September 20, 2013 to sell it take the gearing off and the lexan cover, sell the gears and cover seperate. also sell the engine mounts seperate as ther also for an fg the engine is zenoha i assume 26cc but defo a 2 bolt. pull start,exhaust,carb are standerd and leave them on to sell the air filter is i assume upgraded but id also leave that on to sell so its a drop in engine for most 2 strokes baja,fg etc Quote Link to comment Share on other sites More sharing options...
JimO Posted September 20, 2013 Author Share Posted September 20, 2013 Was a marder race.Sent from my GT-I9300 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
dwarfy Posted September 20, 2013 Share Posted September 20, 2013 How do you know its a 26cc? it could be a 23cc ? Because it says so on the sticker. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.