servo steering fully left after fitting a stick pack

[CousyHull]

just fitted a RX stick pack to my hyper 7 TQ 28 , when I turn on the power to the TX and RX the servo steers fully left and will not steer when I turn the steering in the TX the throttle/break servo works fine, any ideas? cheers

[snchris1]

take the servo horn off and try then...and if its not that it might be trim, ect

[CousyHull]

Servo horn? I'm new to this, sorry

[Thatsliam]

The bit that sticks out of the servo, thats attached the gear. It is the bit that comes from the servo gear on the outside that to your steering set up.

[CousyHull]

ok will try that, as soon as the power is turned on the servo turns fully to the left and will not respond it was fine for the first 5 mins after the stick pack was fitted then just locked left

Thanks for your help

[Thatsliam]

You have most likely changed the trim on your transmitter, there is a little nob that swaps it around!

[CousyHull]

I have sorted it now and working great, thanks for your help, it was exactly what you said.

Cheers