steephill

Sold to sunny.

Ordered a carbon chassis. I'll just have to drive it like I normally do and see what happens. The other plastic chassis's I have broken are the usual landing awkwardly on one wheel on a hard surface.

Check out the brave squirrel. The picture is crap but I had to grab my phone quickly. My youngest Rottweiler Ralph (11 months) is really friendly, so he was just watching through the window.

£60 posted.

Has anyone had any experience of the carbon chassis? I have broken two plastic chassis plates. Both in the same place. And there seems to be no stock off the aluminium chassis.

Price reduced to £30 posted.

Took my Kraton to my local stone quarry. Not surprised something eventually give up. It was cartwheel after cartwheel. And because of the dry weather the ground is like concrete.

I'd try these if.... https://www.modelsport.co.uk/fastrax-1-8-eagle-tread-mounted-on-8-spoke-black-2-/rc-car-products/405165 If you're mainly running on tarmac. Cheap enough to kill off. Mini pin type tyres generally don't last very long getting battered about on tarmac.

Certainly not doubting your bike maintenance ? . You seem a meticulous guy. The Fazer will be as good as new. Fit for loads more miles.

Good job you noticed. Chains can do some damage. Chain broke on my 640 KTM. Locked the back wheel, smashed the clutch slave cylinder to pieces and scared the crap out of me. Far better to replace chains at regular service intervals. Glad all is well bar worn chain and sprockets.

Sold.

Always a possibility as I'm an RC addict?

That bike was rapid on the back twisty roads. But nearly impossible to ride sensibly. This is my current bike Surprisingly comfortably on the road for a sports bike.

Noticed a few supermoto pictures. Here's the best supermoto I once owned. 2004 FE 450 Husaberg. Fully converted to SM spec. A mental bike. I have real fond memories of this bike...

Thanks ?

For sale a set of four RC4WD 2.2 beadlocks. Wheels are used and do have a few scratches. All four hexes are good. 12mm, fits both type of the axial 12mm hexes. The tyres are Proline Hammer, just over 120mm tall. Loads of tread. Huge offset £40 posted. Collection welcome.

RC4WD R2 transmission / gearbox. Bought this for a project build which didn't get finished. So hasn't been used in a vehicle. The transmission mounting plate has been made by me. Measures 78mm x 30mm. Originally had the long output shaft, but I trimmed some of the length and redrilled it. Please look at the last picture to see. So I am including a new in the packet short output shaft. £23 posted. Can be collected from Rossendale, Lancashire.

For sale is an RC4WD dig transmission / gearbox. I used this on my ax10. In good working order. Requires a servo and a spare channel on you're radio gear to control it. Does 4wd, rear freewheel and rear dig. The chassis mounting plate is 85mm x 55mm. ra £30 posted. Can be collected from Rossendale, Lancashire.

I can get you some pictures tomorrow. Off to bed now.

Yes me? I have another set front and rear.

Sold.

Good stuff mate.

Glad you're enjoying it?

https://www.modelsport.co.uk/overlander-5300mah-3s-11-1v-65c-lipo-battery-in-hard-case/rc-car-products/407808 Run this in my TRX4. Good power, good run time.