Bix

As stated in the title I’m after a Hobbywing Max 6, Max 5 or a Spektrum Firma 8S to replace the stock esc in my XRT 👍🏻

Picking up a used Traxxas XRT tomorrow which has 3 good wheels and tyres but the other wheel is cracked at the hex beyond repair. After a spare or a pair of stock wheels and tyres, preferably in decent used condition. Bought a different new set of wheels for it already, but would be nice to have a full set of stocks too for less rough terrain 👍🏻

Hi mate, Likely selling my TRX4m soon and was gonna strip the nice bits off it and sell it nearly stock. Injora and Treal brass diff covers, knuckles, c-hubs, stainless high clearance links, complete gearbox with crawler gears and Injora 48t pro motor, possibly an Injora upgraded servo and mount too. Got a new in packet bronco body knocking about aswell. Shoot me a PM if any of it is of interest 👍🏻

PM’d about the stinger 👍🏻

I’m after a set of Axial Capra axles but will happily have a complete Capra roller 👍🏻

Sold elsewhere, please close 🙂

Reduced to £400 posted

Reduced to £425 posted

Up for sale is my Vanquish VS4-10 Phoenix roller (requires all electronics to run) which is fitted with a standard VFD transmission, not the twin version the kit comes with so no dig or selectable overdrive. Standard VFD fitted has fixed 6.5% overdrive and doesn’t require the additional servos and importantly is much more debris and water tight 👍🏻 Truck has been run twice so the body has picked up some scratches but still looks great and the paint really pops in sunlight. Interior painted black with white seats. Chassis is basically mint and been thoroughly cleaned prior to sale, just a few scratches on the axles, skid and links. Optional parts fitted are the expensive Vanquish brass front portal covers, Vanquish aluminium motor stand off and 3D printed front light buckets with front and rear lights which can handle direct 3S power, i ran them off the receiver and still plenty bright for night runs. All kit spares included, note the front inner fender brace/faux radiator can’t be run with the new light buckets and I had to remove one fan to clear servo wiring. Loads more pictures available if required. £400 and includes postage to the UK only fully insured. Payment via PayPal G&S only if posted. Collection welcome or happy to meet in the Sussex area.

PM incoming 👍🏻

PM’d re the Fastrax caster blocks 👍🏻

Might just fit the bill, cheers for the heads up 👍🏻

After two sets of 1.9 Class 1 tyres so maximum height of 4.19. Ideally after Proline Hyrax in predator compound or RC4WD Wranglers. Will consider other tread patterns as long as they are Proline or RC4WD. Cheers 👍🏻

Cracking event this, went last year and thoroughly enjoyed it. I’d say it was just as good as Funduro which considering it was SST’s first event is saying something. Events are about more than just the terrain for me, general atmosphere, friendliness etc all play a big part and the attitude of everyone at both these events was cracking. Everyone up for a laugh and enjoying each other trucks and generally having fun. I wouldn’t hesitate to recommend either events 👍🏻

Blimey these prizes are getting better by the year! Thanks for the opportunity to win these 👍🏻

Sold to @turok007 🙂

PM’d 👍🏻

PM’d mate 👍🏻

These have served me and the boy well through lockdown, but we are upgrading to SCX24's so this lot is no longer required. Would prefer to sell as a job lot rather than splitting. The bundle contains two FTX outback mini 2.0's one of which is RTR and the other requires your own radio gear, a spare v1 body, spare set of wheels and tyres, spare higher turn motor, a few other spares, loads of spare hardware and a spare stand alone receiver (one of the transmitters broke so I used my Spektrum TX/RX). The two trucks have only been used outside once in the dry so are pretty much mint, they spent most of their time attacking obstacles in the house. Note both ESC's and battery connectors have been changed to JST's so I could use my own decent charger, so you will need a JST charging cable for your charger as I binned the included USB ones as they would no longer work anyways. The Metallic blue one with light blue stripes was a clear body that i painted and underneath is basically stock except for the upgraded metal joints in the driveshafts which is a must have. The electronics are all stock including the battery and transmitter. The Dark blue one with black roof, bonnet etc is a stock body that I've painted the various black sections on the outside of the body myself which massively improves how it looks in my book. It has the electronics upgrade kit fitted, so has a standalone ESC, stronger servo and will work with any standard radio gear so if you already have a transmitter all you need is a receiver and you are ready to go. Also included is the standalone receiver that will work with a stock transmitter but mine broke so is not included. It has the stock motor installed as I preferred the additional wheel speed it gives but the upgraded higher turn motor is included. It also has the metal driveshafts joints fitted. Also note the battery for this one is not standard, its from a mini drone I had and due to its different dimensions can be run above the servo which put more weight up front, I've always just stuck it in place with doubled over tape and has never come loose. Great little trucks for mucking about in the house or small obstacles in the garden especially if you have kids or a willing partner. Looking for £90 posted for the lot, postage will be insured and to the UK only. Payment via PayPal G&S only please. Any questions please ask before buying. Thanks for looking 👍🏻

This thread makes me miss my MT410 massively 🙈 such a lovely handling thing and tougher than most 1/8 monster trucks even out the box, mine was similar spec to yours both electronics and M2C parts wise. The only times I did break I was taking the tbh 😂 Enjoy it mate and please don’t sell it soon as I might have to buy it 😉 Oh and I had to bite the bullet and get an unbreakable shell too, looks awful but saves constantly repairing or replacing lexan bodies every few run.

Roller sold to @iRiCkYx

£250 ARTR Hobao sold to @turok007

Apologies for the late reply my email notifications are playing up! I had a PM waiting in front of you and it’s already gone pending payment I’m afraid

These two have been in the loft for over a year but I finally got round to sorting them out. Both have been completely rebuilt with new bearings where required and fresh diff oil throughout. Please read the descriptions fully and review all pictures so you know what your buying. The first one is the better of the two and is almost ready to run apart from radio gear, the included electronics are all from the 4S RTR version. The ESC power switch has been replaced as the original was playing up and the battery leads have been shortened before adding the XT90 connector so there isn't too many cables floating about under the shell. It has been tested this afternoon and works perfectly so all you need is radio gear and batteries and your ready to go. It has upgraded springs, shock pistons, rear chassis protector and front and rear alloy hinge pin holders. It has also just been fitted with a new chassis which I've modified along with the rear diff housing so you can use two rear chassis braces, this is detailed over on the Hobao VSE owners thread and works a treat at preventing the rear of the chassis bending under extreme conditions. The body developed a crack but has been repaired and the entire body has been reinforced with shoe goo and dry wall tape and its in great condition otherwise. The mounted Fastrax badlands copies are only one run old and one has been reglued where needed. The stock wheels are also included and although pretty worn are good enough for some car park bashing. Also included is pretty much every spare part you could ever need, although we have very rarely needed to use most of them. Being a used RC the front shock tower, shock caps and the wing have a few scrapes but other than that its mint. Given the condition, the fact its been completely rebuilt and the spares included this one is £250 (SOLD) posted via Parcelforce Express48 to the UK only. The second one up for grabs is a little rougher round the edges but has also been completely rebuilt and is sold as a roller. NOTE this one does require one new part to get it completely sorted, it needs a new front shock body as my boy somehow managed to bend one, I did sand down the piston slightly to alloy free movement which was plenty serviceable for bashing but there is very little damping on that corner so it needs replacing really. The part required is part number 90045 which is readily avaliable for about £20, also included is a brand new set of upgraded pistons and a new shock shaft so that's all you will need. This one also has the double rear brace mod and proves just how well it works as although the chassis is pretty scarred its perfectly straight. It also has the alloy rear hinge pin holder but not the front as they weren't in stock at the time but there is two spare plastic front braces included which I never needed anyways. Theres a few other spares included and a couple of well used spare wheels which need reglueing, The mounted wheels are also well used and have been reglued a few times now but have plenty of runs left in them. The body has been reinforced with shoe goo and dry wall tape but has developed a crack by the rear mounting hole and the front mounting hole is stretched, both easily repairable with some more shoe goo. Other than the points above this one runs just as smooth as the first one and just needs some electronics and the shock sorting and your good to go. Bit unsure how to price this one as it needs the shock sorting so I'll price it at £100 (SOLD) posted via Parcelforce Express48 to the UK only but I am open to sensible offers. Thanks for looking 👍

Not surprised you miss it as it’s a cracking build, very impressed with the Trailking I’ve just picked up based on first impressions. Really like the minimalist cage work on this build, I’d love to try my own cage work at some point as it opens up so many options. Your cage work always looks so tidy!