chrisknights

Full Astrotuff track down in the south near steyning postcode : BN44 3SS we run from 1/10 buggy 2wd-4wd shortcourse 2wd-4wd electric buggy - electric truggy and nitro 1/8 models , all ages welcome all skill levels welcome https://www.facebook.com/photo.php?fbid=10156700536036630&set=pcb.2844697038899534&type=3&theater&ifg=1 https://d2975efb-2564-4440-8880-a47bf7d5f789.filesusr.com/ugd/b2a867_2d4bf045cee94b138abe5fc4ea8344ce.pdf

High speed needle if I remember right is fully close and 3 full turns out and low end needle fully close and 3.5 turns out

finally after a year of planning and building Adur model club off-road is back up and running , with full astro track allowing us to run all year round , classes ranging from 1/10 buggy - shortcourse 2 and 4 wd to 1/8 buggy and truggy nitro and electric racing this sunday race dates facebook page how to find us testing the track

Bonjour

https://www.rccarshop.co.uk/electrics/esc-esc-motor-combo/speed-passion/sp000195-reventon-r-esc-2s-comp-v3-0-17-5r-combo-p speed passion will do you proud , as im sure your be runing blinky 17.5 , plus if you go on speed passion web site you down load the lastest software

for brushless combos i use Funshobby

track is open and this sunday there is a meet on

i have had a lipo fire ,if it was mine i would bin it , mine had split the case and puffed , and used it and boom , FIREEEEEEEEEEEEEEEE

Do you no what carb you have in your car ??

spring might of broken on the clutch

any chance you can post a short video up when you can

The guys at our track are running Schumacher stagger rib on the fronts or mini spikes

nices prizes , well done to the winners

once its up and running , try the spit test , yep spit on the head and if its fizzes straight away its running really hot , i would get a temp gun for the furture , for the guys and girls who run nitro for years can tell its running lean of rich by sound and performance , over time your pick that up

check for any air leaks

whats your pinch like on your enigne ,

dont forget if your racing its a approved by BRCA https://www.brca.org/documents/169-eb-05-brushless-motors-13-5t-spec-2016-v2.html

let me drive it like i stole it

Fitted new heavy duty turnbuckles to my savage xl , as old ones keeped popping off

get the engine warm on stock settings , run up and down and tune the hsn only till you got as much power as possible and then back off 1/8 of a turn so there is smoke still coming out of the exhaust then tune the lsn so you car shoots off like a rocket but has smoke still coming out of the exhaust then adjust the idle or watch this video https://youtu.be/ma2_CghxiUk

well you can feel the pich when you pull the pull start plus another way is to take the engine out and hold it by the fly wheel and if the engine spins around then yeah its lost its pinch , so new liner and piston , but then again there are engines out there that are cheaper now that oyu can get , but then i would go back to stock needle settings and try again , if all fails , you then check for air leaks and then check the pinch ,also make sure your air filter is new or clean as that will effect the tuning

HYPER ENGINES - 21 A) High Speed Needle Low Speed Needle C) Idle Screw D) Midrange. Do NOT Adjust! Turn both the High Speed and Low Speed needles (screws) to flush in relation to the collar/sleeve. This means bringing the top of the screw head even with the top of the sleeve or collar in which its housed. Leave the LSN (Low Speed Needle) flush with it's sleeve. Do NOT adjust the Mid-Range Needle. Call tech support if you made adjustments to this screw. Then turn the HSN (High Speed Needle) in 1 turn from flush. Closer to 2 turns in from flush will make the engine run faster, but your temperature can get too high quickly. Stick to 1 turn unless you are more experienced.

is this a brand new engine or second hand