Leaderboard

Pressing the bulb won't flood the engine however many times you press it, all you're doing is cycling the fuel through the fuel lines and carb basically. Pulling the pull-start 15+ times probably will though.

Unfortunately these are now out of stock Due to popular demand I have decided to put these back on sale again.. When they are no longer available I will change the thread title to sold and ask for the thread to be closed, to order just send payment as detailed below, no need to PM first.. I am assuming the prices are good value, not bothered to check to be honest, if they are a ripoff best someone lets me know! These are suitable for 1/10 or 1/8 scale, no idea if they are OK for 1/5th as never seen one yet! They fit my Savage XS (bit big looking though) and are fine on the MT4/ Trophy Truggy/ Summit. I do have a limited number of smaller ones suitable for 1/12th size such as Savage XS, if you want any of those PM me for price Available in following quantities, price includes 1st class postage (only post to UK) and paypal fee's so what you see is what you pay.. 20 -

Shame been looking for bashing buddy for ages lols

I went 2nd hand first and nearly gave up on nitro's until someone suggested getting a new bullet. now I'm well and truely hooked love the things!! But with this forum I'd be lost lol. you just need patience and be prepared to maintain them once you've got those your half way there mate Oh and know how to use a screwdriver gently lols

learn to solder ?

Nitro 1/8 trucks just get

Keep us posted mate there is a bullet thread a long read bit really helpful http://www.msuk-forum.co.uk/topic/93429-hpi-bullet-owners-club/

I love my bullet once I upgraded the shocks and hubs it's handled 6-7 foot backflips off my ramp with ease. I'll try get some vids for ya but for now here's some from my first bash, unfortunately I lost front wheel drive so was a little tricky to handle

Easy mistake glad I realised sooner rather than later lols

Another reason to call them in the morning lol

Yea when you first get it new out the box you just need run over the whole thing make sure all is tight and well, then maybe do the same at different intervals.. I've done neither lol and this is why I'm at where I am now with new wheels and a new spur!

If it ain't rubbin......

Nightmare mate lol . Done the same myself posted a hong nor truggy to someone and recieved a message saying there was no shell and sure enough there it was hanging on a nail in the shed pmsl

Need to go lower

I tighten the bolts when the engine is hot and also put a v thin nut on the end of a slightly longer bolt also red Loctite will work but is difficult to remove due to the extra strength it has.

Should be no bills but with all the apple products in the house and the fact that I pay it bloody could be lol Rob

I've had 5 polos. Bit of a dub nut, hence the name! Looks good dude.....

Best take it off completely, realign it on the output shaft then threadlock and screw

Also if your really friendly you might not even need a receipt ide lost my ps3 receipt while moving house then it got the ylod I called gamestations head office in basingstoke wher I lived at the time had a friendly chat with a lad and he said they'll accept it for free repair I just had to drop it off at the local gamestation and the call centre guy phoned them and told them to acceot it. I was very happy with that. Until I got to the store they said I wouldn't get the assanis creed game back that was stuck in the machine but would give me a new ps3 then and there I said thanks but I want my game back no ifs or buts as they said it could be lost during the repair and they cant garantee ill get it. Another call to the office and they said take the case to the store and theyll give me a disk from the shelves. Very happy.

Ok. Would baggeridge be suitable for large scale Marcus? It's been ages since I've been there, I can't remember if it'd be good for them or not... what large scale you got a Leo? You got anything else to bring smaller?

honestly mate.. Do yourself the biggest favour and talk to your local consumer protection agency / Citizans advice company. They are the only people who can tell you your legal rights without any doubts. I like you think they should just replace them, but again I dont know the law 100% and TBH I seriously doubt anyone on here would be able to tell you 100% either unless they work in the relevant sector.

Mines turned up

Here's mine, first car! (well I drove a crappy KA around for a few months but I don't count that) 1.4 Polo S, lowered on coil overs

Bajas both tested today and ready for the weekend just ordered some windows for the km to finish it off . Some tyres and stuff to collect from the no1 mechanic tmoz to sort the other

I did take note it was angled down slightly but if you angled it more to the horizon your be missing some of what's in front of you, the point of FPV is to see where your going.. I dare say with some clever editing packages you could make a monster road movie and get some great filming shots, but for FPV surely you want a clear field of view not obstructed by a dash.. When your driving your car you don't have half the windscreen covered by your dash do you ?? Might be different if say the fake dials where actually some sort of added gps system that you put on after filming to show speed, distance etc.. To me its like having an annoying black line across the bottom of the screen doing nothing other than blocking your view ..

cheers jimmy it certainly is a great tablet you get alot of tech for your money. Bump

Because as long as you have a good spark and do a few slow pulls (5/6 pulls) it pumps some fuel through, then some fast pulls and those first few pulls almost act like the choke is on for those pulls... It does work

Put the choke in from the my baja, started it up & it just went full throttle on me? These are the positions it was at: Thank god it was on a stand.

I like these panels make it looks different to all losi's. Will be taking it out the evening, finally!

Should have slapped the delivery bloke and told him to hurry the F up and get up to sunderland with my truggy the bitch LOL

My short Corse arrived about an hour ago lol

Easy enough to do rounded corners. Just glue a few layers of plasticard inside to make a corner fillet, or else use car body filler to fill the inside of the corner....then sand it to shape on the outside. Then you an cut out windows and glue in some thin lexan to make the curved windows.

Well a year on since the build and still going strong. Photos from NEO 14 and with the same engine still.

If you find anymore for

I was going to do rounded cab at the back but just wanted to get it dun

T bones fitted now

ARRRRGGGHHHHHHH, bloody hyper st didnt turn up today and neither did my esc, tracking info says tomorrow is the day tho Got my decals for it today tho so thats a consolation I suppose..... On the plus side tho had my baja out in the street and the grip off the tarmac tyres are mint! forgot to re adjust the brake tho and nearly knocked myself over LOL...

I have an acquaintance who has used that website quite a lot...he has had about 10 cars this year alone through swapping them on that website.

that flame kit is badass but a little to big would look cooler if it was more scale but nice job mate

Lol,ok lets discuss.You can get both products from a pound shop,then maybe when you've used them to have ago at cleaning plugs,you could use them to clean your crapper .If you've been in the hobby for a while,you tend to build up a collection of fould plugs I've bought 4 plugs back to life that seem to work just as well as before that would of other wise ended up in the bin.And as I run 4 large scales quite often is deffo saved me some money,and as they say every little helps

http://www.amain.com/product_info.php/cPath/1_25_1461_132/products_id/3691/n/OFNA-13x16x02mm-Differential-Shims-4 http://www.unlimitedengineering.com/cgi-bin/store/scan/co=yes/fi=products/sf=category/se=Bulkless/sf=spare/se=0/op=eq/tf=category/tf=sku.html?open= Bingo!!! https://www.tqrcracing.com/shop/product_view.asp?pg_no=1&n_p=&c_p_id=&p_id=3215&p_keyword=&s_maker_id=&s_cate_id=&cart_seq= https://www.rc-monster.com/forum/showthread.php?t=31733

I fit these for a job as a sparky... There are many things to choose- 1. How many camera's (4,8,16,32,64) 2. Do you want to so it via phone or laptop ? 3. How big hard drive do you want ? (500gb - 10tb) 4. Hi def on a good system also requires better wire... 5. Do you want it on your tv's round the house ? And if so hd on all of them ? 6. Will you have it connected to a monitor ? 7. What TV line do you want ? At least once a month we have to go and put a proper system in place of one of those crapy maplin jobbies, they just dont last !!! Would shy away from them imo... And as far as the motion and recording go it can be all setup within the systems. We have our cam's set to motion recored and put the 30 seconds before motion in front of it so never miss it. The sensitivity can be adjusted and is separate for each camera. As someone comes on our drive it goes full screen on the picture in picture on tv and records. Its like picking a new RC really, the more you know what you want the better. A bit of advice tho... If you think 4 camera's will be enough, it wont! You will get camera fever and want more camera's, just go for an 8 way and leave them blank until you decide or funds allow where you want the other camera's

Have a look at the hyper 7, there are 100s on topics about them on here

AS has already been said, Buy something good from the offset. Strip it, use the internet and indeed this site to do sensible upgrades, rebuild with all new bearings, bushes, a quality brushless set up and go for gold. You will appreciate it and know exactly how it all goes together when you break it........and you will break it.

I'm running the Savox SC-1268SG servo. It kicks some butts compared to the stock servo. I got it for $35 shipped off of Rctech.net.

I actually had dropped a 3800 5mm rotor in the stock 4000kv can and ran it before I put the stock rotor back in and sent it to HPI to be replaced. It fits in fine for the most part. The magnets line up with the coil pads perfectly and everything. The only issue is the shaft on the back of the rotor is shorter and it doesn't insert into the bearing on the rear cover all the way. It only inserts in the about 1/8th of an inch. You have to use the 4000kv rotor spacers for this to work. I had an idea of pulling the bearing on the back cover out enough to use the 3800kv spacer. That way it would fully engage the rear bearing. I wasn't able to take measurements to be sure if it would work though. I can check further when I get my replacement Vektor motor in. Mike

Think I'll stick a blue oval on my forehead.

Y U NO CLEAN SERVO AND BATTERY?!?!?!?!?

It would certainly be a huge amount of fun to pitch one maxx against another! Shame we're so far apart, but I'm up for next years bash, this years was great, had a blast with so many RCers there, roll on 2012! I'll sort out an up to date pic today.