Leaderboard

This is a shame, I used RCMI a lot in the past, Cain always gave great customer service and had a good range of stock; sorry to hear things have ended like this. No need to "lol" Highlander, this blokes livelyhood is being affected

Losi pipe just arrived! Get in!

Doubt Trackside will have them in stock .. I did a goggle search way back at the beginning of the year and found them there to find out the guy hasn't got them in stock but has them on order.. Best place i found for parts was Philshobby Shop State side takes around a week for parts to come but he always has stock.. I did notice the other day thou that Modelsport are starting to stock a few more parts .. Or the other way to have a endless supply at your finger tips is to do what Smash did and get a st1 roller of eBay for around a

We are currently running a deal if you buy a Punisher + from us you can buy a CY 26cc engine at the same time for

been messing around with 10 inch tyres at the moment, air inflated, then onto another set of tyres happy new year lads 2013 keith "mr-m" swindon

Probably the 1st of nevermber.

Same heli that got me hooked! Getting a Tx like the Dx6i and Phoenix sim(12in1 off ebay

More stable in experienced hands G lol. A weapon in a noobs hand ha ha. Seriously tho I caught myself with my mcpx which is tiny and it still drew blood. Happy new year everyone.

Tidied the cabled on the dex408 and change the spur on the mini 8 to a metal one.

If you want to have enough time to do a full break in I would give yourself a whole day, with scope to do a bit more the next day if you need to. It really is worth committing a day to it so you don't get tempted to rush things. The hardest part is resisting gunning it before you're done just to get a glimpse of what it can do hehe.

All I can say if your not ripping the back arms off an fg or the engine doesn't move out of mesh U must be driving it round a flat field in circles, oh no sorry even then I could still rip its rear arms off

Haha! Knew you would come around to the idea G, X4 is just the start and you will be hooked!! Wow, your actually alive then Dan

were did you find them wheels from

Hong Nor X1CR or CRT I have the buggy version which has a good handling and is very tough

Just run the first tank in the 5ive im still smiling like a big girl!!

could you please add a ball park figure to the ad please

price? i dont think you can ask for offers bud

New scope arrived! Got the celestron 76eq, very nice build, feels very solid and the mount is nice and heavy. Yet to test it but hoping for a nice clear sky tonight. http://www.amazon.co.uk/Celestron-31035-Astromaster-76EQ/dp/B000MLL6QY

Looks like you may have another member of the North East Bashers after the 21st of this month when I get paid, just need to find me a 2nd hand hyper to get started with. From Middlesbrough, but the womans parents live in Murton & I am there most weekends, she has been helping me work out where the bash spots are & has already agreed to do the full scale diving for me (potentially more dangerous than the bashing lol) so hopefully in a few weeks time I will be up & running, but I will be down to check a bash out before then. So if anyone fancies flogging a buggy around the 21st, then let me know, as I'm now 29 & have wanted since I was about 8 lol! Next bash, look out for the skinny lad with no buggy, but with a massive grin lol! Jay

Cleaned the GRPs with some brake cleaner and fitted them on Also neatened the wiring a bit more And started work on the undertray; just a few holes left to do and then I need to start thinking of cooling

Think it does all come down to look too really, as I do myself just smile at how much bigger and better the Losi looks compared to my dads 5t baja ( but if were all honest we love our bajas really ) its just we have not had enough time and mods to do to the losi yet flip a coin

i would but I haven't got round to buying a soldering iron yet I've spent a fortune on parts and prezzies so that's on next months must buy list

Now, in 2009, we bring an entirely new platform to further enhance your race experience...........

losi's are not quick in a straight line, and a 26cc baja will be quicker than a 30.5 losi. in the corners a baja could keep up with a losi if the baja can get traction and your a good driver. a losi could be slower round a corner if they are a bad driver vs a good baja driver. some people have quicker reaction times/ more experience of the track/area. i would go for a v2 baja and sell the standard engine new and buy a 4 bolt 26cc + engine so you can then put a head kit on it when you want more power. And buy outer wears covers, new clutch, and then enjoy. throttle servo could do with changing but not a must. If going for more power than a 26cc a drive shalf upgrade would be a good idea.

the motors that are not rebuildable like firebolt and clash are junk , dont waste your money , if your going brushed get a rebulidable one , the power torque and rpm are completely different on them compared to non rebuildables of similar winds

"Borrow" the screws out of your sons car!

Wickham was ok for fgs , small but still fun,

http://www.hobbyking.com/hobbyking/store/__7190__EZ_RUN_Brushless_Motor_13T_3000Kv_GENUINE_.html That motor you posted was too small, I use these 13t eZruns with 45a ESC's, a good cheap brushless motor. I have 4 in different cars and have never had a single problem.

http://www.modelsport.co.uk/modelsport-uk-6v-receiver-battery-and-charger-pack-hump-pack-/rc-car-products/24135 That's spot on iv got it in my savage

Buy the 6v hump pack from modelsport for

the only thing i will say is that there are essentials to any 1/5, killswitch, outerwares etc and with the losi from what i have seen a pipe is needed so a rtr losi is closer to

If u get the hump pack and charger set from Modelsports u get the switch with it as I did with mine

Cheers Yeah they are addictive mate eh!

Next modification, this really was a spur of the moment thing. with days becoming darker around 4pm now I decided a set of lights were in order, firstly i tried 2 front facing LED's this didn't really do much of anything if I am honest. 2 light pods from a HPI baja mounted to the front bumper and being supported by my front bumper at the bottom did the trick...actually my eyes are still hurting after looking at them as I turned them on haha With all the lights off, only the MERV lights are on here...

Bit of common issue and for the life of me i don't know why.. If you get stuck drop me a pm and i'll lend you one of my spares if it helps you out

Integy central!! Braided covered pipes - can't see if it's priming or not. Expensive shelf ornament - but probably the most interesting. One thing 'though, for such an obviously elaborate paint scheme, why the stick on light decals? !!! DAMN!! Al.

Ooops here tis lol http://item.mobileweb.ebay.co.uk/viewitem?itemId=130812509846&index=19&nav=SEARCH&nid=09067079854 Ooops here tis lol http://item.mobileweb.ebay.co.uk/viewitem?itemId=130812509846&index=19&nav=SEARCH&nid=09067079854

Well lads, it looks like i will be becoming the only UK based dealer for vanquish RC products, including all the tasty bits they make for the Exo Terra (mines gonna be fully loaded obviously ) So if any of you guys are interested in any of the bits they do and would like to order me to order them in on my first order with vanquish, please give me a shout and ill add anything you need onto the order. Thanks Chris

Losi Imo

Already pmd him buddy I think he's found another one but cheers!

Also 8GB dude

Some video I got from today, looks a bit cloudy as the lens of the camera wa a bit wet.

Hi mate I have a used interior I have no need for, it came out a 1/10 shell I bought on eBay- it's sprayed black a bit tatty I guess- I can post some pics up?

+1 looks great, really want a baja as i have huge fields near me which are perfect for one, ill probably be able to afford one when i move house lol

loving it mate

Or take the driveshaft out and just run dual motor, just for the fun of it!

Couple of pics of my on-road truck,

thicker diff oil at front then thick oil in center a thin in rear that should help solve you problem for e.g 10k, 10k, 4k