SimplyChunk Posted April 23 Share Posted April 23 On 24/01/2022 at 18:02, psyklone6 said: Funny you mention that, that's exactly what I did before Christmas and I have had issues. First off, I shoud say it drives like a dream., when it's working. However I've had a problem with the motor mount moving out of position, ultimately resulting in what you see in these photos.... (finally ended up fully knacked today) So, that's £20 and a wait for a new chassis plate. And I am thinking a couple of steel or carbon fibre plates bolted top and bottom to screw the motor mount into. Other than that I'm dead pleased... I've recently gotten the 9020 too and didn't like the stock motor mount. It shifted. At speed. I ended up running into the wheel of my actual car, car and bent the chassis a little 🤦♂️ . I scrapped that stupid motor mount and got the truggy mount instead. Part number: 8456. It's been solid since even though the chassis doesn't have the third hole for the mount (it replaces the rear panel on the centre diff housing and is held by those two screws). You wouldn't have to replace the chassis with this mount either. Here's my build: Surpass Hobby 150A ESC RocketRC 4068 2650Kv Motor with Surpass Hobby Heatsink and Fans Surpass Hobby M1 15T Pinion (fitted since pics) 31Kg MG Servo Nice looking Cheapo Servo arm (fitted since pics) DumboRC XF6G Rx DumboRC DDF-350 Tx CNHL G+ Plus 70C 5000MaH 4S Lipo Cheapy Dish Wheels and Tyres (These were a disaster lol stock fitted since pics lol) I trimmed the body shell back from the front too. I didn't like the way it hung over the front diff. Also lined it with some heat and duct tape to try and keep it together. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.