neiloid1 Posted March 16, 2007 Share Posted March 16, 2007 Hi all, I've looked through all the posts on this site and can see nothing about installing the Losi mini T ball diff. All I want to know is this - I understand that the side with the adjuster screw goes on the opposite side to the motors pinion gear, but which side is the adjuster screw in? One side has the dog bone cup that comes off easily, the other side does not, and I don't want to force things, so I'm guessing that the side which has the cup that comes off easily id the side without the adjuster screw and therefore should exit the gearbox on the same side as the slipper gear.... Confused yet? Thanks, as always, in advance for any advice given. Cheers, Neil Quote Link to comment Share on other sites More sharing options...
neiloid1 Posted March 18, 2007 Author Share Posted March 18, 2007 Hi, I now have the answer. The out drive cup that is easily removed gives access to the adjuster screw and should thefore exit the transmission on the left when you Mini T is viewed from the rear. Hope this helps others. Cheers, Neil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.