RICMAC Posted February 25, 2007 Share Posted February 25, 2007 Hi I need a little help I am new to the world of nitro so I am a little confused I have a tamiya nitro crusher built on an NDF-01 chassis I was looking around and found a hop-up option for a two speed transmit ion witch I have purchased When fitting the new parts I found that they didn’t quite fit the parts on the chassis so I proceeded to machine them down so they would fit and line-up to the new clutch bell perfectly I reassembled the new transmission into the car and everything looked great. I then come to test it for the first time I started the car but the new transmission only spun and didn’t turn the wheels so I dismantled it and checked everything was ok it was every thing was as the manual explained, the thing that was causing the problem was the one-way bearing on the first gear was the wrong way. so now I am stuck Was wondering it anyone ells had had this problem Thanks Richard Quote Link to comment Share on other sites More sharing options...
samij121 Posted February 25, 2007 Share Posted February 25, 2007 turn it round? Quote Link to comment Share on other sites More sharing options...
randomguy Posted March 2, 2007 Share Posted March 2, 2007 (edited) Yer it could be the one way cluch or its all the wrong way around Edited March 3, 2007 by randomguy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.