king motor 001

[djandyh]

hi all

 

ive got my first baja the king motor 001, you get some great upgrades with it, you get a 26cc head and piston head as well, i remember talking to someone on here about this upgrade, am wanting to know can this head and piston be fitted as straight on to replace the 23cc head, do i need to buy any new gaskets

 

cheers

[Wraithstorm67]

I would always replace the gaskets there cheap enough so I wouldn't risk re-using the old ones but as its new pull it apart and see if there ok

[Bigjimknickers]

I'd wear out the stock first, then get a gasket set & replace after 20+ tanks or when the power loss is noticeable.

[djandyh]

sounds good to me, are they easy to replace 

[sean-vrs]

sounds good to me, are they easy to replace

The first of four

https://m.youtube.com/watch?v=e0aFZ1ACrsE

Edited September 11, 2015 by sean-vrs

[flatout!]

I wouldn't run it to the point of death lol! Ideally change before its starts loosing power, you could wear the barrel out doing that, just keep an eye on it smoking nore than normal and get a tto hour and rpm meter on it, then you'll no exactly what hours its run and what rpms your getting,

That's not important really to start with but you can relax on how many hours its run,

Wish id taken my advice and bought one, I haven't a clue what my reeds done hours wise lol!

But yeh get one kid you'll not go far wrong to when to up to your 26

Edited September 11, 2015 by flatout!