jimmer7 Posted April 18, 2015 Share Posted April 18, 2015 The pinion bolt have snapped whats the best way to try and get the other bit out. Quote Link to comment Share on other sites More sharing options...
Gazlam Posted April 18, 2015 Share Posted April 18, 2015 (edited) Not sure what size the car is but i usually Drill a small hole in the centre. Get a Hex bit small enough to knock into the hole you drilled. Screw it out. Or you can use a easy out. Drilling still required. Edited April 18, 2015 by Gazlam Quote Link to comment Share on other sites More sharing options...
mark35 Posted April 18, 2015 Share Posted April 18, 2015 If its not threadlocked it should come out easily with something like a small screwdriver, just try an turn it enough so you can grab it with pliers and unscrew. if its threadlocked then good luck.. btw if you do get it out do the nut an bolt mod an you wont have this prob again.. Quote Link to comment Share on other sites More sharing options...
jimmer7 Posted April 18, 2015 Author Share Posted April 18, 2015 I tried drilling did not go well, just ordered vertigo clutch bell and hardened pinion . Quote Link to comment Share on other sites More sharing options...
mark35 Posted April 18, 2015 Share Posted April 18, 2015 Prob solved then.. Quote Link to comment Share on other sites More sharing options...
jimmer7 Posted April 18, 2015 Author Share Posted April 18, 2015 Just used freeprawn racing for first time to order some bits, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.