icebeaver Posted April 16, 2015 Share Posted April 16, 2015 Hi I have just received my son's New controller and am having problems. I have followed the instruction and googled everywhere but cannot find the solution. It seems I manage to bind them together (red light turns solid) but then when I test, the steering is back to front and the throttle and reverse randomly go by themselves, somtimes you might turn the steering and it could actually go into reverse.. Crazy Its on a dhk wolf with a turnigy trackstar 4000kv if this helps Anybody and ideas Thanks Jim Quote Link to comment Share on other sites More sharing options...
NuttyProfessor Posted April 16, 2015 Share Posted April 16, 2015 Flip the ch1 switch to reverse the steering and calibrate the esc. 1 Quote Link to comment Share on other sites More sharing options...
evssv Posted April 16, 2015 Share Posted April 16, 2015 Yeah u get a stupid mini CD disc with sum foreign gabaldegook on it...and yes I have bound 3 of these up but still can't remember how it goes. .lol! ! Quote Link to comment Share on other sites More sharing options...
icebeaver Posted April 16, 2015 Author Share Posted April 16, 2015 Haha yep got that weird little CD that doesn't make much sense lol I will try again to recalibrate esc in the morning Thanks Quote Link to comment Share on other sites More sharing options...
Deafty Posted April 16, 2015 Share Posted April 16, 2015 1st bind tx to rx: insert esc throttle cable into ch2 rx insert bind plug into rx 'bind' forget steering (for now) hold bind button on tx down turn on tx --> wait then release tx button. hold down rx button (keep it pressed down) turn on esc --> wait till rx turns solid red. 2nd: Calibrate esc as per manual -->power off if forward goes backwards: switch any 2 motor cables (sensorless only) or flik ch2 rev switch on tx then recalibrate 3rd: insert steering cable. 4th : check left is left and flik ch1 rev switch if need be 5th set steering end points with tx 1 Quote Link to comment Share on other sites More sharing options...
Glenyboy Posted April 17, 2015 Share Posted April 17, 2015 (edited) Good video that explains everything, the video is for the 3b but they setup the samehttps://youtu.be/rOcoWl6dNjw Edited April 17, 2015 by Glenyboy Quote Link to comment Share on other sites More sharing options...
icebeaver Posted April 17, 2015 Author Share Posted April 17, 2015 Great Calibrating the esc seemed to be what I needed to do. Thanks very much, I would never have tried that. Thanks Jim Quote Link to comment Share on other sites More sharing options...
NuttyProfessor Posted April 17, 2015 Share Posted April 17, 2015 Always calibrate the esc even if it seems to work with the new transmitter 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.