conchp Posted March 7, 2015 Share Posted March 7, 2015 Okay ive had my baja for about 3 weeks maybe more, im concentrating on things and upgrades. So before i get the front ali i want to get these breaks done. I understand there better on the front, i need the cable clamp. anyway heres what ive done. The break pads are close to the disk, not touching. ive tried bottom of the pad tilting in vice versa with the top. Ajusted slack in the cable ect. Set servo so it pulls furthest that it goes. The servo is only pulling 8ish kg in a 6v so i know its not the best and is due for upgrade, But even when i push the lever in as hard as i can, it does make a difference, but if i can just move it with my hand i know a 1/5 scale going 30 odd mph will easily still not be the best at stopping, as in the video it shows the cables ect and what i mean by pushing the lever. Any help would be appreciated cheers connor Quote Link to comment Share on other sites More sharing options...
jordan_bench10 Posted March 7, 2015 Share Posted March 7, 2015 Mate your going to need to get a better servo at the very least even my budget ones pull 13kg steering a savage 1 Quote Link to comment Share on other sites More sharing options...
conchp Posted March 7, 2015 Author Share Posted March 7, 2015 hmm iknow mate , i think thats going to be that, least if it is i can get 2 things sorted at once, cheers for the post mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.