conchp

Hi guys I’ve got a trophy 3.5, been running fine upto last night when I had a run away, all batteries are fine ect, I turned off and on again and it ran ok, when I went to repair to damage to the arm this morning I realised the servo is now sticking on full throttle, no movement with trigger. If I close gap with hand before turning it on it will auto open throttle when turned on? thanks

130?

150inc postage ?

Hi guys. here I am selling a like new hpi firestorm. Bought from msuk around 2 month ago and used 3 - 4 times on flat grass only. It is fully broke in and has had 1.5l of nitro through it. it has never been rolled on its roof. The only part of the buggy with damage it a few scuffs on the rims and the 2 bolts holding the exhaust onto the engine have gone missing, But I have since replaced these with some screws. Everything on the buggy is perfect working order and apart from the above it is perfect. im selling this for 170 inc sined for postage, it is all boxed up and ready to go. Please feel free to inbox me. I can drop of from Oldham,Manchester if your not to far

model Technics modelsport 25?

is fuel spitting out of the exaust of my firestom ok? if i lean it it will cut out on full throttle, its more or less only a quarter turn on the hsn from factory?

ive managed to find some bolts of my old rc that fit, i will do like you said tho, best rc ive had up to yet, prefair it to my baja and savage!!

thanks mate

my firestorm is cutting out when i brake from full speed. any ideas?

hi guys. my new firestorm has been ran all day, the vibration has made my exaust come away from the engine and ive lost the bolts, does anyone know sizes ect of them?, im going to go get some tomorrow at the handyman store ?

thanks guys

HI ive just got my firestorm. ive more or less broke it in on stock settings fuel spitting out ect, now that im tuning i need help. when applied full throttle and then left to neutral it shudders? and sometimes cuts. ive turned the hsn no more than a full turn clockwise does anyone know what this means?

HI ive just got my firestorm. ive more or less broke it in on stock settings fuel spitting out ect, now that im tuning i need help. when applied full throttle and then left to neutral it shudders? and sometimes cuts. ive turned the hsn no more than a full turn clockwise does anyone know what this means?

30 if gone today ?

Hey guys. Here i have my ansmann Virus buggy roller. The buggy has only been used a couple of times and is like new. Im selling due to not having interest in Rc any more after many years, The reason im selling cheap also is that i cant shift it and its just sat in my room when it could be built and drove the way it should. All it needs if a few bits and bobs srew wise as i used a few of the buggy to go on my baja, other than that it is in perfect condition. The shell has a slight crack in from being stood on by myself sorry ahaha but hasn't got a scratch on it. no engine or exhaust, or radio gear but the original throttle servo and traxxas steering servo are included. Please pm me for mode details.

170?

I have no idea what i should ask for so offers over

does anyone know if i put 2 0.5 ohm coils on my rda with a cherry bomber mechanical mod, would it be safe?

hmm iknow mate , i think thats going to be that, least if it is i can get 2 things sorted at once, cheers for the post mate

Okay ive had my baja for about 3 weeks maybe more, im concentrating on things and upgrades. So before i get the front ali i want to get these breaks done. I understand there better on the front, i need the cable clamp. anyway heres what ive done. The break pads are close to the disk, not touching. ive tried bottom of the pad tilting in vice versa with the top. Ajusted slack in the cable ect. Set servo so it pulls furthest that it goes. The servo is only pulling 8ish kg in a 6v so i know its not the best and is due for upgrade, But even when i push the lever in as hard as i can, it does make a difference, but if i can just move it with my hand i know a 1/5 scale going 30 odd mph will easily still not be the best at stopping, as in the video it shows the cables ect and what i mean by pushing the lever. Any help would be appreciated cheers connor

cheers guys