Jump to content

Badtouch0

Members
  • Posts

    32
  • Joined

  • Last visited

Everything posted by Badtouch0

  1. M2c arrma Kraton/outcast/senton/Talion/Mojave chassis £130 posted to uk mainland Kraton 8s chassis £200 posted to uk mainland Arrma Kraton 8s Crusher SWB £260 posted to uk mainland. V1 and V1.5 versions available. Arrma Notorious metallic Blue body £55 posted to uk mainland Arrma Kraton 8s front hinge pin blocks £50 posted to uk mainland Arrma Kraton 8s rear hinge pin blocks £50 posted to uk mainland Kraton lightweight speed chassis £130 posted to uk mainland Thanks for looking 😊
  2. Sorry man i added them in now 😊👍🏻
  3. M2c racing arrma and tekno. And lots more Available on my site from M3, POS, GKA and 23MP Www.badtouchbreakers.com Please note these are pictures I've taken and not from the manufacturers 😊 Talion rear tower £45 Talion front tower £45 Stand off kit £20 Pillow ball retainer set £25 Mt410 wide (game changer) chassis £150 Mt410 wide (game changer truggy) £150 Arrma 6s top hinge pin holder £38 Kraton/Notorious Front tower £45 Kraton/Notorious rear tower £45 All prices include postage and PayPal fees.
  4. Hey buddy unfortunately I'm doing everything on my phone 😔 and the link doesn't appear to work. Feel free to email me the said attachment. [email protected] And I'll take a look . Thanks for taking the time out to do that man much appreciated
  5. Thanks man i had thought about that just wasn't sure about strength with them been 3d printed that's if that's the only option then i guess I'd have to take it
  6. Hello everyone just wondering if someone could point me in the right direction of getting some a arms for this trooper everywhere is out of stock or doesn't sell them anymore, drawn up some specs of the a arms if anyone can suggest a replacement or knows of something that fits that would be amazing Cheers and thanks
  7. So today i got myself a fixer upper. An arrma Talion V2. So i began work onit tonight... Oh boy was i in for treat, as you can see, it's got a broken diff case, bent rear tower, but the that was the tip of the ice burg. As i took off the rear hinge pin mount FR and RR, both plates where bent, i then removed the hinge pins and lower hinge pins.... Your not gunna believe it... But they where bent 🤦 i had a stripped screw on the diff case which was broken anyways so no point in been careful, so tore off the front and opened up the diff.... This was dryer then a sponge left on a sunbed for a few days.. could of used a different analogies but chose this one, so... Diff internals are now soaking in cleaner. Tonight i will order a new diff case, I've cleaned up the hub bearings, and cleaned the hubs, also replaced the spacers between the arm and hub to eliminate any slop in the rear rub. I've included some pictures of the bent parts lol. So i cleaned up the rear arms and guards using pink muc off spray, and then coating them in some GT 85, also wiped down the rear axels with GT85. This is as far as I've got but stay tuned if your interested in this build, restoration. As I'll be posting updates as i go Thanks 👍🏻 Build part 2 So i stripped out the diff, cleaned them. And reassemble, put some new shims inside. And used green slime to seal the orings, poured some lovely 10k diff oil in there and this baby is good to go. Found an old diff case, cleaned it up with some bearings blaster, to rid it of any old oil, regreased the bearings. And Everything is sliky smooth! Fitted diff back in the case using a shim, which was 0.2 i believe arrma shims are 0.1 so this is like double shimming it. Took the shocks apart, fitted some V3-V4 shock caps so i can use the V3-V4 stand offs and shock balls for easier mounting of the shocks. Added some 80w (1000cst) mounted a new rear tower, replace the button heads on the tower with cap heads. This should make taking the tower off easier. I Threadlock the stand offs to stop them coming loose. Re adjusted the droop screws, so hopefully should minimise the rod end breakages. And then reassemble to put into the chassis rear end is done. Lets seeee what joy and happiness the front end will bring 😂😂 Ok so the wife was nice enough to let me disappear to get abit more work done on this little beauty. So i stripped Everything out of the centre of the chassis. Battery tray, receiver box, motor, esc servo cleaned all the chassis plate, side guards, esc had its caged all ripped open, the centre diff for some reason was locked up, and wouldn't turn by hand, dry as a bone.... 😔🔥 No gasket and a screw missing. The diff had of corse decided to do a diff poo all over the chassis plate. Once the removed the front centre driveshaft, found the front pin had Snapped 😲 and the drivecup decided it loved me and fell onto my bench. (That's one less thing to worry about getting off right? 😂) One of the tabs on the esc had snapped off, so i used some scotch double sided tape (massive thanks to @richard Robinson for this amazing tape 😆 and also massive should out to wezley Marshall for giving me the esc cage super stars lads. So I've then cable tied the esc to the tray so that is definitely not going anywhere once the tape sets! Cleaned up the motor mount, and re instailled it. Also thrown in a V3-V4 servo mount on it as they are alot thicker plastic and should help with the flex from the servo. I also cleaned all the inside of the esc, as the hint sink was filled with loose grass a few small stones and a truck load of dirt. Tonight i will strip the diff, clean all the gears etc inside, check o rings, and replace the gasket..... I say replace... I mean add one also the diff cup needs replacing as i can see a stone or an object of some form (can't Blame Everything on stones right poor stones 😂) has worn down the cup. Once everything is rebuilt it's time to add Everything back in the chassis. If you guys are enjoying this as much as i am please let me know 😊 As I won't doit again 😂 Cheers Whats uppp lovely people, so this build is coming along nicely... 😁 I have to say i honestly don't know how this centre diff was even in one peice 😂 it was that bad. O-rings replaced gasket put on a used but good diff cup, and reassemble diff with some light use of green slime. Not a right lot to add to here. Put everything back in, so the battery tray, the centre diff, fed all the wires through into the reciver box, fitted the STX2 radio gear. I sealed it all in with a thin layer of silicon grease around the seals on the reciver box. And Everything cleaned up 100k diff oil in the centre. I'll start work on the front this evening hopefully and have it ready for the customer tomorrow. 😊
  8. Badtouch0

    SOLD

    Items received 👍🏻 good feedback for @Badkad
  9. M2c Typhon towers £90 posted to uk and N Ireland M2c Kraton 8s motor mount £50 posted to uk and N Ireland Slide 5mm and 8mm are £20 (Please note the stock slide doesn't work with the M2c motor mount nor will the motor mount work with the stock Chassis) m2c 6905 TEKNO V2 ALUMINUM SOLID CENTER BRACE £37.00 posted to uk and N. Ireland. m2c 6755 TEKNO SHORT REAR CENTER BRACE FITS MT410,.3 BUGGY,TRUGGY £23.00 posted to uk and N. Ireland M2C 6775 TEKNO 48.3 TRUGGY REAR CENTER BRACE £20.00 posted to uk and N. Ireland M2C 6981 E TRUGGY REAR HORIZONTAL BRACE £40 posted to uk and N.ireland M2c Kraton 8s chassis £215 posted to uk and N.ireland M2C 6760 TEKNO MT410 FRONT UPPER SHOCK TOWER BRACE £25 posted to uk and N.ireland M2c game changer wide body Mt410 £150 posted to uk N.ireland All available on my site Www.badtouchbreaker.com More arrma upgrades available on there too. I will post worldwide but charge an extra £5 to cover the cost all charges will be added upon check out, for Eu and other countries postage is included to uk and N.ireland 💪🏻
  10. I started a new arrma build, Kraton on a Talion chassis 😊 that's as far as I've gotten 😁
  11. M2c Kraton 8s chassis £215 posted to you, is all brand new and sealed M2c Kraton 8s Motor mount £50 posted to uk doesn't include the slide M2c 5mm and 8mm slide £25 each posted (price is for one slide) M2c talion chassis £130 posted to you M2c arrma skid plates Tekno long rear brace Tekin Gen 1 (i believe) RX8 esc been run but full working order (bought it on a whim and then after i checked wasn't water proof) looking to get £170 for the pair that includes postage All products available to buy on my website Www.badtouchbreaker.com Cheers 👍🏻
  12. Sorry man i saw this just didn't get time to reply, i Replied to you on the arrma forum. I'll put a chassis to one side for you 👍🏻 pm me your number and I'll give you updates as to when I'm ordering and when I'll expect them in 😊 hope this helps
  13. They will be plain Aluminium, put though the tumbler 👍🏻 and it will be first come first served Www.facebook.com/badtouchbreakers I'll announce once they are in stock on there
  14. Cheers man i found you on Facebook and sent you the tracking number, but I'm guessing you didn't get it 😂 👍🏻
  15. Ok so I've managed to secure 5 Chassis's from M2c they will cost $225 from M2c I'll be looking to sell them at around £180 but it will deppend on import costs and exchange rate at the time 😁
  16. Chassis should be available from M2c on the 10/1/20 so soon as they are available I'll be placing an order for them awaiting price on those atm from mitch, once i know the cost in dollers I'll work out a price in pounds 😊
  17. Hey buddy I'm afraid this sold on my site 😔
  18. Hello sir I believe i have an M3 rear brace for that car TEKNO REAR CHASSIS BRACE LONG This brace stiffens the rear part of the chassis. The brace connects the rear bulkhead to the middle diff. The original plastic brace is no longer required. Suitable for: ET48.X
  19. Hey buddy I'm M2c uk dealer, so yes all new and unused, and the parts i have in stock are for MT410 👍🏻 I have some wiggle room on prices, as in if you buy a few i can take off postage costs 👍🏻 Here is my number give me a text pal 👍🏻 07568753288
  20. I think no matter what brand you have people expect more then what the car can delivery out the box, they see YouTubers sending them in the air with no breakages, and think they can do the same out the box, and that is simply not the case with any brand (maybe an xmaxx) so always bare in mind anything out of the box will generally break if you sending it to the moon. I've owned my Notorious 6 months, having upgraded it to pretty much the max it is now an animal, and lasted 5 hours without a breakage and was sending it everywhere! 30ft. No problems the car eats it for breakfast and wants more. Firstly never had any issues with the BLX 185 AMAZING SYSTEM imo for a ready to run! Only down side to these is the BEC which only runs at 6v Out of the box, they are good, for the general basher, but due to the plastic Chassis braces that come as stock,they allow to much flex in the chassis. it's a ticking time bomb before you bend the chassis, if you just like small jumps and blasting shouldn't be a problem. So if you are thinking of a 6s these are the things to consider. The 3s..... 😬 I'm not a fan, they are good performing trucks, but... Seem (for me) a pain in the arse to work on.. centre diff is replaced by a slipper clutch which is a pain to set right, All been said arrma are an amazing brand.lots of support, and aftermarket parts are available... Parts support is also good. Better then it was a few years ago so I'm told. Hope this helps 👍🏻
  21. These parts make me wish i had something to put them on 👍🏻
  22. M2c Kraton chassis braces £50 posted to uk Go big or go home M2c Braces for tekno MT410 £75 posted to uk M2c Tekno Shock caps £50 posted to uk mainland M2c Tekno electric diff set £80 posted to uk mainland M2c tekno rear chassis brace short £20 posted to uk mainland M2c Kraton/Outcast rear tower brace £25 posted to uk mainland M3 Additional esc plate for MT410 £30 posted to uk M3 rear chassis brace for MT410 £17 posted to uk Proline body for tekno MT410 £35 posted to uk M2c Kraton/Outcast Towers £100 posted to uk
  23. If you have never heard of pos they make a wide variety of products for a few different cars i have bashed the living s#&t out of my outcast bumper and it's still going after 6 months. Here are some examples of there work.
×
×
  • Create New...