Madmini

Sold

Bumperty bump

Hi guys,need to clear a little space before next season. So I have for sale my trusty Frsky Taranis x9d plus It’s got Hall effect gimbals Soft carry case Lanyard Stock nihm battery Wall wart charger Spare set of original stock gimbals (never used) £140 but open to offers Also for sale 6” Skoll v2 quad Holybro f4 fc Holybro tekko esc, Holybro atalatal vtx Eagle power 2888kv motors RunCam swift Rxsr rx The quad is in practically new condition. I’ve flown it a total of 2 times before I started on another project. £150 but open to offers Thanks for looking and any questions give me a shout

Take a look at arduplane

You should be able to get a phantom 3 std second hand for that sorta money

I use a ts100 for all my soldering now. Better to run it off a 4s than a 3;) Brilliant iron Get the extra tips

15-45mins.... depends on battery and how hard I hit the throttle

Not flown one personally but I would take a look at the zohd dart which is about the same size and is super easy to fly. And packs away super small too

Cmcc don’t like 5th scales. Wmrcb is mostly on Facebook and arrange bashes most weekends. I’m not active in that group much anymore (or on this forum either tbh) Best bet is check the Facebook group.

I think brushed quads leave so much to be desired. They are horridly underpowered compared to the brushless setups. Since the tinyhawk and Mobula 7 came out I haven’t seen many people flying brushed. Everyone I know has moved to brushless....

If you search around on here somewhere I have a build thread for my old merv. It was running 1/10 esc and motor and was utterly savage! What I will say is arms (even the rpm ones) snap if you look at them and the shocks are total rubbish. Expect to do some modding to get everything to fit. It will also roll on its back at every opportunity (which is seriously annoying) That being said mine was a brilliant little truck that went like utter stink and was great fun (when it wasn’t upside down)

I don’t think any 5” props are really quiet. That being said biprops are quieter than tri...

If it’s something you just want to have a go at to see if you enjoy it then the max tinyhawk rtf bundle is for you. https://www.unmannedtechshop.co.uk/product/emax-tinyhawk-micro-rtf/

Hi guys, im re listing my Dom v3 as they had a duff battery. this has now been replaced along with the goggles foam. So so brand new usb charged fatshark battery, brand new goggles foam No module is included with the goggles as I don’t have a spare. fatshark dominator v3 £200 or sensible offers

Removed from sale due to needing a replacement battery

Hi guys, Fatshark dominator v3 Comes with battery, case, charging cable and fatshark lense cleaning cloth. Price is shipped including postage but open to offers £200

Single battery no funky editing flight round my local field. if you enjoy it then please subscribe

Uhu por is the stuff for foam planes. Ca will usually eat the foam Hot glue can work Whatever you use take some fine grit sandpaper and key the edges

Sorry I don’t know anything about syma so can’t advise. If your looking for something around the 5” size to get started with the each one wizard 220 is a good a starting point as any..... Either that or build your own

Yea that would do. How about a tiny hawk or mobula7. bit more expensive but both are good

Take a look at betaflight and inav. Both are configurable flight controller firmwares

As in write code for? Maybe take a look at the betaflight project or the inav project....

You might be able to get something from isdt

If I’m honest I loath brushed whoops I would suggest perhaps A tiny hawk https://www.unmannedtechshop.co.uk/product/emax-tinyhawk-micro-rtf/

Have you had a look at the menacerc led systems? They might fit the bill...