MattW123 Posted February 17, 2021 Share Posted February 17, 2021 23 hours ago, .AJ. said: I’m guessing the shop is Dutch, I have no idea if they ship to the UK tho https://www.toemen.nl/losi-lmt-4wd-solid-axle-carbon-plates-pieces-p-50426.html?osCsid=b4c3u6lv4j13dghrldgejhnsf7 Thanks. 1 Quote Link to comment Share on other sites More sharing options...
Acidsnow Posted February 17, 2021 Share Posted February 17, 2021 On 16/02/2021 at 14:42, .AJ. said: I’m guessing the shop is Dutch, I have no idea if they ship to the UK tho https://www.toemen.nl/losi-lmt-4wd-solid-axle-carbon-plates-pieces-p-50426.html?osCsid=b4c3u6lv4j13dghrldgejhnsf7 They did last year as that's where my first mojave came from, no sure if brexit shenanigans might have changed that tho. 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 RH Design internal axle braces arrived 👍 Still waiting for the freestyle RC’s ones, they were meant to ship on the 15th and nothing, the tribute adaptor I ordered last week haven’t been shipped either, I’ve emailed him to ask for a shipping date, but he has ignoring me, but he was very quick to say he would ship to the UK though..... I’ll give him a couple more days and then I’ll get PayPal to get my money back. 1 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted February 18, 2021 Share Posted February 18, 2021 (edited) 8 minutes ago, .AJ. said: RH Design internal axle braces arrived 👍 Still waiting for the freestyle RC’s ones, they were meant to ship on the 15th and nothing, the tribute adaptor I ordered last week haven’t been shipped either, I’ve emailed him to ask for a shipping date, but he has ignoring me, but he was very quick to say he would ship to the UK though..... I’ll give him a couple more days and then I’ll get PayPal to get my money back. After cancelling mine it took him 10days to refund me I don’t think he has the best or quickest service 😂😂. From what I’ve seen though no one else has had there’s other than the usual YouTube and freebie gang 🤷🏻♂️ edit Won’t those internal braces be enough though ? Edited February 18, 2021 by mydoddy69 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 Yea more that likely, I’m going to bond them in with that Gorilla adhesive you recommended for body shells 👍 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted February 18, 2021 Share Posted February 18, 2021 4 minutes ago, .AJ. said: Yea more that likely, I’m going to bond them in with that Gorilla adhesive you recommended for body shells 👍 Great idea hurry up then and bash the snot out of it I’m dying to see if it holds up Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 Haha, it’s not going to be driven like a Talbot though 🤣🤣🤣 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted February 18, 2021 Share Posted February 18, 2021 16 minutes ago, .AJ. said: Haha, it’s not going to be driven like a Talbot though 🤣🤣🤣 That’s only for the stupid or free riding YouTubers to do 😂😂 2 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 Rear axle done The fit is spot on 👍 3 Quote Link to comment Share on other sites More sharing options...
alexdaytrade Posted February 18, 2021 Share Posted February 18, 2021 New to the forum but not to r/c's. Just received my GD LMT. I have treal front and rear axels on order from JER customs . I'm wondering if anyone noticed the rear axel being off. I can see its set at least 15 degrees off from the front. I'll fiddle with it when I get home from work. Alex Quote Link to comment Share on other sites More sharing options...
alexdaytrade Posted February 18, 2021 Share Posted February 18, 2021 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 The rear lockouts have 3 degree as stock, there is 0 degrees ones in the spare parts provided with the truck. Or the links could be different lengths? Quote Link to comment Share on other sites More sharing options...
alexdaytrade Posted February 18, 2021 Share Posted February 18, 2021 14 minutes ago, .AJ. said: The rear lockouts have 3 degree as stock, there is 0 degrees ones in the spare parts provided with the truck. Or the links could be different lengths? Thanks for the reply, Seems to be more then 3 degees, I'll look into it. Looks like your internal axle braces would have been a more cost effective solution, then the Treal... I have a reefs rc raw 500 servo coming from Amain, what servo saver would you recommend? I like the freestyle RC adjustable one but it's out of stock. Quote Link to comment Share on other sites More sharing options...
bertberr Posted February 18, 2021 Share Posted February 18, 2021 Quick question for all those who have received their LMT - after giving them a good once over, and having had a week or so to check out any potential design issues (other than axles), would you still buy one today? I know most/all of you guys on here have yet to drive them, but based on all the YT vids they seem to drive great anyway. Still have the roller in my basket, just can't quite decide if I really want one... Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 3 minutes ago, alexdaytrade said: Thanks for the reply, Seems to be more then 3 degees, I'll look into it. Looks like your internal axle braces would have been a more cost effective solution, then the Treal... I have a reefs rc raw 500 servo coming from Amain, what servo saver would you recommend? I like the freestyle RC adjustable one but it's out of stock. I’ll end up with a set of alloy axles at some point, but at least I can go for run now and not worry too much about breaking the axles. Servo saver wise I’m going to get the Losi version when I can source one, for now a plain alloy one will have to do and from what I’ve seen you are more likely to strip the horn before the gears in the Raw 500 👍 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 4 minutes ago, bertberr said: Quick question for all those who have received their LMT - after giving them a good once over, and having had a week or so to check out any potential design issues (other than axles), would you still buy one today? I know most/all of you guys on here have yet to drive them, but based on all the YT vids they seem to drive great anyway. Still have the roller in my basket, just can't quite decide if I really want one... If you can deal with the axle issue then yes 👌 1 1 Quote Link to comment Share on other sites More sharing options...
bertberr Posted February 18, 2021 Share Posted February 18, 2021 Looking at the above, seems the only decent cost effective solution is those RH Design internal ones, which look fine to me as I'd prefer to maintain the standard axle silhouette anyway. I guess they came from the States, did you buy through their own website or a retailer like Amain? 1 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted February 18, 2021 Share Posted February 18, 2021 27 minutes ago, .AJ. said: If you can deal with the axle issue then yes 👌 Hopefully them 3D printed parts fix it though 🤞 Quote Link to comment Share on other sites More sharing options...
alexdaytrade Posted February 18, 2021 Share Posted February 18, 2021 56 minutes ago, .AJ. said: I’ll end up with a set of alloy axles at some point, but at least I can go for run now and not worry too much about breaking the axles. Servo saver wise I’m going to get the Losi version when I can source one, for now a plain alloy one will have to do and from what I’ve seen you are more likely to strip the horn before the gears in the Raw 500 👍 The Losi 25T version? I was not able to find one. I have an alloy one on order. Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 54 minutes ago, bertberr said: Looking at the above, seems the only decent cost effective solution is those RH Design internal ones, which look fine to me as I'd prefer to maintain the standard axle silhouette anyway. I guess they came from the States, did you buy through their own website or a retailer like Amain? The guy is on Facebook Ross Hinshaw 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 25 minutes ago, alexdaytrade said: The Losi 25T version? I was not able to find one. I have an alloy one on order. Im waiting on Wheelspin https://wheelspinmodels.co.uk/i/334643/ Quote Link to comment Share on other sites More sharing options...
alexdaytrade Posted February 18, 2021 Share Posted February 18, 2021 5 minutes ago, .AJ. said: Im waiting on Wheelspin https://wheelspinmodels.co.uk/i/334643/ That's exactly the saver we need, will they ship to the USA>? Quote Link to comment Share on other sites More sharing options...
.AJ. Posted February 18, 2021 Share Posted February 18, 2021 No idea, I just presumed you were in the UK, I’ve also set a alert at RPP Hobby’s in the US, they came into stock a few weeks ago, but by the time I had seen the email they had sold out 😂 Quote Link to comment Share on other sites More sharing options...
alexdaytrade Posted February 18, 2021 Share Posted February 18, 2021 Just now, .AJ. said: No idea, I just presumed you were in the UK, I’ve also set a alert at RPP Hobby’s in the US, they came into stock a few weeks ago, but by the time I had seen the email they had sold out 😂 I just pre ordered it from wheelspin. 1 Quote Link to comment Share on other sites More sharing options...
alexdaytrade Posted February 18, 2021 Share Posted February 18, 2021 7 minutes ago, .AJ. said: No idea, I just presumed you were in the UK, I’ve also set a alert at RPP Hobby’s in the US, they came into stock a few weeks ago, but by the time I had seen the email they had sold out 😂 Found a site that has it in stock for you! https://www.kingcobraofflorida.com/products/servo-saver-set-25t-complete-lmt-los241037-losi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.