*REDUCED* GRP 1/8 Wheels + Tyres. Buggy + Slicks / Savox 1256TG / MyLaps PT / T-Bone Bumpers / EDS Drivers / Battery Boxes

[mayzie12]

Bit of a clearout...

 

Set of GRP 1/8 Buggy Tyres. Pre-mounted from the factory. Really good wheels and tyres, will survive all the brushless antics you can throw at them.

£25 Posted.

 

 

Lots of GRP Slicks. Perfect if you are using a buggy / GT for a bit of fun on tarmac. Lot includes;

Brand new Pair of S1 Compound XXSoft

1x Pair lightly used S4 Velocities. These are the ones rated for 100mph+

Full set S3 Revo Slicks. Probably 50% left on them but they are pretty durble. Quite tatty but all still glued solid.

3x S1 Compound Rally Slicks. Barely used.

3x S5 Compound Revo Slicks. Again barely used.

£35 for the lot posted.

 

 

 

T-Bone Bumpers. All to suit 1/8 Buggies.

Not much used on them, few scuffs as you would expect. one with the Extender strip is unmarked.

£10 Posted each, or all 3 for £25.

 

 

Savox 1256TG

Case is a bit rashed but all good apart from that.

£25 posted.

 

 

MyLaps transponder. Old style, will work with all of the MyLaps gear unlike some of the later ones.

Has been repaired and potted up at somepoint but all still working fine

£35 Posted.

 

 

Set of EDS Drivers.

1.5mm has the tip snapped, but handle is good for replacement tip

2.5mm - Grub screw which holds the handle in is cracked.

Other two are fine. Tips on the rest are good too.

Very hard wearing drivers. (I snapped the 1.5mm by using it as a lever....)

£12.5 Posted

 

 

Battery Boxes.

I've 3D printed these over the years for various projects.

The Two blue ones are sized for a Hong Nor X1 CRT - However the hole pattern is for an extended IRC Chassis.

Very sturdy boxes. Have the loops for the velcro printed on too, with hexes cut in for captive M3 Nylocks nuts for a flush fit.

Handy if you are needing a battery box to mount somewhere, just need to drill the holes to match.

 

159x72mm Internal Dimensions

174x83mm External. Not including velcro loops

16mm Internal depth, 25mm Total height

 

£7 each posted.

 

 

More Battery Boxes

Again printed for a project. Idea with these was to sit on aluminium off the side of a buggy chassis.  Four captive m3 nuts to secture to chassis. Two slots in one end for the lipo leads. Loops on the side for velcro.

 

153x54mm Internal Dimensions

188x64mm External, including the base.

50mm Total depth

£7 Each Posted.

 

 

 

Edited February 15, 2020 by mayzie12
Reducing Prices

[mayzie12]

Bump

[mayzie12]

Bump

[Shaunyboy1992]

Servo still for sale bud?