Hobao hyper 7 conversion

[stucbx]

Im in the process of converting nitro hyper 7 to electric and not sure what pinion to get does the hyper run mod 1 spur.it's standard spur fitted 87005.also got a 2150kv motor what size pinon would I need.

[dazp1976]

10 minutes ago, stucbx said:

Im in the process of converting nitro hyper 7 to electric and not sure what pinion to get does the hyper run mod 1 spur.it's standard spur fitted 87005.also got a 2150kv motor what size pinon would I need.

All the gear ratios are the same as on the Trophy buggy flux. (43/13 diff + 46 spur)

15T pinion is standard on that with a 1950kv motor. I'd start conservative with a 15T on the H7 and see where you're at with temperatures/speed etc. Then gear up/down if needed once you have your temp/speed/runtime data.

[stucbx]

Have anybody tried these Check this out at Amazon.co.uk 4PCS 16T 17T 18T 19T M1 5mm Shaft Motor Gear Module Pinion Combo Hardening for Brushed Motor of 1:8 1:10 1/8 1/10 RC Monster/Buggy/Truck by Crazepony-UK https://www.amazon.co.uk/dp/B077T2VM7F/ref=cm_sw_r_sms_apa_4wfxBb4F625D4

Edited July 28, 2018 by stucbx

[stucbx]

This link might work https://www.amazon.co.uk/dp/B077T2VM7F/?coliid=I3EZKV37Q7HJ9R&colid=PNBK8HVL3NIT&psc=1&ref_=lv_ov_lig_dp_it

[dazp1976]

3 hours ago, stucbx said:

This link might work https://www.amazon.co.uk/dp/B077T2VM7F/?coliid=I3EZKV37Q7HJ9R&colid=PNBK8HVL3NIT&psc=1&ref_=lv_ov_lig_dp_it

Never tried those ones.

I think I'm using these:

https://www.ebay.co.uk/itm/Brush-Brushless-Motor-Gear-15T-16T-17T-18T-19T-Pinion-M1-5mm-for-1-8-RC-Car/282594516674?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D2%26asc%3D52945%26meid%3Db53df4f80a7f423d915d84f63cf75f7b%26pid%3D100005%26rk%3D4%26rkt%3D12%26sd%3D142853617804%26itm%3D282594516674&_trksid=p2047675.c100005.m1851

From China though.

There's loads of packs on ebay from £5 upwards.

 

 

[dazp1976]

3 hours ago, stucbx said:

This link might work https://www.amazon.co.uk/dp/B077T2VM7F/?coliid=I3EZKV37Q7HJ9R&colid=PNBK8HVL3NIT&psc=1&ref_=lv_ov_lig_dp_it

 

Scratch that.....

Get yourself these ones mate

https://www.ebay.co.uk/itm/GoolRC-M1-5mm-15T-19T-Pinion-Motor-Gear-Combo-Set-for-1-8-RC-Car-Motor-K8B5/283019823985?hash=item41e54bcb71:g:HrsAAOSwL~hbLMGd

 

 

Loads of U.K. listings here for the pinion sets for future reference:

https://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_sop=15&_nkw=m1+15T+pinion&rt=nc&LH_PrefLoc=1

Edited July 28, 2018 by dazp1976