stretch Posted November 17, 2016 Share Posted November 17, 2016 I'm interested but didn't realise needed to state as such and didnt think it necessary to say nice pens or nice fans. Not sure why you want to force people to sign up to an online magazine to see a running video? People love a running video so upload to YouTube and share on here. 3 Quote Link to comment Share on other sites More sharing options...
twisty Posted November 17, 2016 Share Posted November 17, 2016 Oh,the twin wheeled TX is pretty cool IMHO,if it works ok it would be great for both L/H and right handed drivers for a quick change of drivers (thinks endurance racing) and i have never seen it done before,so i like that too:D even though i prefer to use sticks. lol. Quote Link to comment Share on other sites More sharing options...
saviown Posted November 17, 2016 Share Posted November 17, 2016 has the esc smoked? 1 Quote Link to comment Share on other sites More sharing options...
evssv Posted November 17, 2016 Share Posted November 17, 2016 (edited) 18 hours ago, Carpmart said: What do you mean by your comment above? I pop by this topic quite regularly. I have nothing constructive to add to the wing debate etc, so I keep my 'mouth' shut...... TBH, people are all probably just waiting for you to post a bloody video up! same here.....yes....we r all waiting for a vid...even if its only 10secs......WE WANT VID!!........ Edited November 17, 2016 by evssv Quote Link to comment Share on other sites More sharing options...
sean-vrs Posted November 18, 2016 Share Posted November 18, 2016 I'm also in the waiting camp, very interested in how you get on. Quote Link to comment Share on other sites More sharing options...
Leeb Posted December 26, 2016 Share Posted December 26, 2016 (edited) I haven't been on here for a while. All I can say is silence is golden. There's loads of owners of this beast out there yet there are very few looking for support or moaning, This is a good sign, people are more vocal when they are ****** off. This RC is a great piece of kit, really in terms of toughness out the box it has upped the game. I'd be more than happy to bring it to any RC meets near (yorkshire) me for you to look at. I've a few vids on my youtube channel 78vintages although there's a guy doing much more than me on then he can be found here https://www.youtube.com/channel/UCSkhvpnEDshbvNLKBy7zHpQ/videos Edited December 26, 2016 by Leeb 2 Quote Link to comment Share on other sites More sharing options...
Leeb Posted January 7, 2017 Share Posted January 7, 2017 It's still awesome, takes some cleaning though . I have had a failure, the rx has packed in. The double sided tape is weak and its come away and been bounced around. I have now had 3 Spektrum rx's fail in a year. I think i'm at the point now where a full strip down and clean is needed, last run there was steam coming of the dif housings. If I find owt i'll let you know. 1 Quote Link to comment Share on other sites More sharing options...
mond Posted January 7, 2017 Share Posted January 7, 2017 I can certainly recommend the arearc aluminium ones. Quote Link to comment Share on other sites More sharing options...
rudeboy Posted February 1, 2017 Share Posted February 1, 2017 (edited) Hey folks, been a while since I posted anything on this forum, got out of the hobby for a while and sold off all my stuff pretty much, anyways got back into it at christmas time with the purchase of an MTXL for myself and a recat rampage for my son, heres a few pics The MTXL and Rampage MT Really enjoying this truck and have been giving it some abuse and so far its just taking it in its stride, only real issue I had was some drive cup grub screws and servo horn screws coming loose on first run but since have been round the truck and redone all metal to metal screws with blue loctite and had no issues since, Upgrades I done right of the bat was got rid of the stock radio and went with a futaba 4pls unit, fitted LOSI alloy shock towers and chassis braces, have also got losi alloy rear hubs and front hub carriers to fit and have some hot racing diff cups, servo saver and middle driveshaft support thingy on route as well as bartalone pipe and outerwears and a few other little bits and bobs, Gonna concentrate on getting the drive train fairly bomb proof then will be looking to get a bigger engine in it possibly OBR or the likes, will update as I get more done to the truck Edited February 1, 2017 by rudeboy 1 Quote Link to comment Share on other sites More sharing options...
capri-boy Posted February 1, 2017 Share Posted February 1, 2017 On 1/7/2017 at 21:42, Leeb said: It's still awesome, takes some cleaning though . I have had a failure, the rx has packed in. The double sided tape is weak and its come away and been bounced around. I have now had 3 Spektrum rx's fail in a year. I think i'm at the point now where a full strip down and clean is needed, last run there was steam coming of the dif housings. If I find owt i'll let you know. I've had a rough year with spekky rx's too - SR4210's and SR410's - frightening when I add up the new cost to replace them. As such i've bought an older DX3C to use orange £8 specials with. Quote Link to comment Share on other sites More sharing options...
Malcs RC Posted February 2, 2017 Share Posted February 2, 2017 15 hours ago, rudeboy said: Hey folks, been a while since I posted anything on this forum, got out of the hobby for a while and sold off all my stuff pretty much, anyways got back into it at christmas time with the purchase of an MTXL for myself and a recat rampage for my son, heres a few pics The MTXL and Rampage MT Really enjoying this truck and have been giving it some abuse and so far its just taking it in its stride, only real issue I had was some drive cup grub screws and servo horn screws coming loose on first run but since have been round the truck and redone all metal to metal screws with blue loctite and had no issues since, Upgrades I done right of the bat was got rid of the stock radio and went with a futaba 4pls unit, fitted LOSI alloy shock towers and chassis braces, have also got losi alloy rear hubs and front hub carriers to fit and have some hot racing diff cups, servo saver and middle driveshaft support thingy on route as well as bartalone pipe and outerwears and a few other little bits and bobs, Gonna concentrate on getting the drive train fairly bomb proof then will be looking to get a bigger engine in it possibly OBR or the likes, will update as I get more done to the truck I like these I'm going get one summer rampage sweet also Quote Link to comment Share on other sites More sharing options...
Leeb Posted February 3, 2017 Share Posted February 3, 2017 On 01/02/2017 at 19:23, capri-boy said: I've had a rough year with spekky rx's too - SR4210's and SR410's - frightening when I add up the new cost to replace them. As such i've bought an older DX3C to use orange £8 specials with. Orange ? I've not heard that before. Quote Link to comment Share on other sites More sharing options...
m4inbrain Posted February 3, 2017 Share Posted February 3, 2017 9 minutes ago, Leeb said: Orange ? I've not heard that before. Going on a limb here, since i only saw your posting and didn't read the context: https://hobbyking.com/en_us/orangerx-r615x-dsm2-dsmx-compatible-6ch-2-4ghz-receiver-w-cppm.html Quote Link to comment Share on other sites More sharing options...
Leeb Posted February 3, 2017 Share Posted February 3, 2017 17 minutes ago, m4inbrain said: Going on a limb here, since i only saw your posting and didn't read the context: https://hobbyking.com/en_us/orangerx-r615x-dsm2-dsmx-compatible-6ch-2-4ghz-receiver-w-cppm.html Well I think you're right and that's new to me, nice one Quote Link to comment Share on other sites More sharing options...
m4inbrain Posted February 3, 2017 Share Posted February 3, 2017 No problem. Used these before as well, although not for a ground vehicle, but a fixed wing. Did the job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.