Fuel % recommendations for T-15 engine

[fish6634]

Hi All

 

As above really just want to know what % i can go up to on a T-15 hpi engine.

 

I have been flushing it through using 25% but will that be too high on a small engine?

 

Thanks

 

Graeme

[B4D TEMP3R 303]

use 20%

[hipwell]

25 is probably pushing it. 20 should be OK.

[jordanp]

i use to use 25% in a g3.0 which is the same, it ran very sweetly

[Tamiyacowboy]

18-20% to be safe. 

 

race wise you will push it hard with 25% and cause it to let go quicker

but your wanting podium finishes so are willing to somewhat take that risk

for a greater reward. 

 

run the 25 through it but dont max out the throttle keep it to about 80-85% 

once its gone grab some race blend 20% and it should fly like a devil unhinged

Edited September 1, 2015 by Tamiyacowboy

[jordanp]

18-20% to be safe. 

 

race wise you will push it hard with 25% and cause it to let go quicker

but your wanting podium finishes so are willing to somewhat take that risk

for a greater reward. 

 

run the 25 through it but dont max out the throttle keep it to about 80-85% 

once its gone grab some race blend 20% and it should fly like a devil unhinged

nether managed to find 20% race blend when i had mine still would have used that