jonesyba42p Posted January 18, 2015 Share Posted January 18, 2015 (edited) I have the above model and recently lost one of the pivot cylinder thingys from the driveshaft so ordered these: Turned out not to be right, to small diameter:( I think i need this little kit: http://www.axialracing.com/products/ax31148 Seems expensive when i only need 1 bit out of it but i cant find anything similar to what i previously ordered but bigger!!! Ive seen these 2 other options: http://www.asiatees.com/display?Axial-SCX10-Parts-Hop-Ups-Upgrades&brand=Axial&model=SCX10&id=64014&pid=1http://www.asiatees.com/display?Axial-SCX10-Parts-Hop-Ups-Upgrades&brand=Axial&model=SCX10&id=57219&pid=1 But im unsure if they would be compatible or if they are any good. Can anyone please advise me on my predicament. Thanks for reading. Oh and heres my truck: Edited January 18, 2015 by jonesyba42p Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted January 18, 2015 Share Posted January 18, 2015 (edited) i would`nt bother wiht the topcad ones there pish no ide about the gpm ones never used them and cant you send the other parts back and get the right parts as you have the hd wb8`s basicly the newer version of the part you ordered Edited January 18, 2015 by mini-z-awd Quote Link to comment Share on other sites More sharing options...
smeghead28 Posted January 18, 2015 Share Posted January 18, 2015 (edited) Go to the Axial website and download the instructions if you dont have them already. Looks like it is part AX31028 to me but don't know exactly what bit it is your are after. http://docs.axialracing.com/instructions/Kits/AX90044-i001_-_SCX10%E2%84%A2_Deadbolt%E2%84%A2_RTR.pdf Edited January 18, 2015 by smeghead28 Quote Link to comment Share on other sites More sharing options...
jonesyba42p Posted January 18, 2015 Author Share Posted January 18, 2015 Thanks for the speedy response chaps, ill disregard the topcad ones then. The thing that worries me about the gpm ones is that the slider is a slot and pin design so in theory could fill with mud and not slide,and its anorher pin to worry about wearing out and breaking. The part ive lost is the little cylinder with a hole in it that the pin then goes through. Ive previously had a good look round the shops and cant find anything similar to the kit i wrongly ordered, other than the complete rebuild kit i linked above. I think postage back to china would be more than what they cost lol. Quote Link to comment Share on other sites More sharing options...
jonesyba42p Posted January 18, 2015 Author Share Posted January 18, 2015 AX31148 is the part number.......will have a search and see what i come up with unless someone has a link for me. Quote Link to comment Share on other sites More sharing options...
RCbutcher Posted January 18, 2015 Share Posted January 18, 2015 Is it gmp that has the no questions warranty from asiatees? Quote Link to comment Share on other sites More sharing options...
jonesyba42p Posted January 18, 2015 Author Share Posted January 18, 2015 I believe they do. Quote Link to comment Share on other sites More sharing options...
jonesyba42p Posted January 18, 2015 Author Share Posted January 18, 2015 A quick search for the above part number brings me to this http://www.axialracing.com/products/ax31148 So basicaly if like me one of the pins snaps out on the trail and you lose the pivot cylinder its gonna cost around Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted January 18, 2015 Share Posted January 18, 2015 A quick search for the above part number brings me to this http://www.axialracing.com/products/ax31148 So basicaly if like me one of the pins snaps out on the trail and you lose the pivot cylinder its gonna cost around Quote Link to comment Share on other sites More sharing options...
jonesyba42p Posted January 18, 2015 Author Share Posted January 18, 2015 Good to know, ive sent asiatees an email to confirm this. Recon i will order some if they say they fit, then ill see what axial have to say about ripping off its customers. Quote Link to comment Share on other sites More sharing options...
jonesyba42p Posted January 20, 2015 Author Share Posted January 20, 2015 Still awaiting a response from asiatees, have sent axial an email so will be interesting to see what they say if anything. Can anyone confirm if the GPM shafts are any good? Baring in mind my truck sees alot of mud and sand. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.