Jim-Bob Posted June 25, 2014 Share Posted June 25, 2014 (edited) Sadly it doesn't look like I'm going to have the time or the funds to finish this as I'm in need of a cheap 1:1 runabout that takes priority over this project. Here's how the baja stands at the moment: I have built it from the ground up with some of the best parts available! Spec list is as follows: Innovative-RC enclosed chassis (black) Innovative-RC under chassis brace (black) Innovative-RC front upper plate (black) Innovative-RC hinge pins (full set, fronts fitted, rears will be included in sale) Innovative-RC screw kit (used to build this far, rest will be included to finish build, plus some spares) Innovative-RC full bearing kit (rubber shielded, front hub ones used, all others needed are included) Innovative-RC front arm brace, lower brace and front upper brace (all in black) Innovative-RC rear upper plate (not yet fitted) RPM front bumper RPM front upper and lower 'A' arms Fullkill HD quick release throttle linkage (BNIP, not yet fitted) Vertigo clipless front axles Vertigo extended rear hubs (to fit front axles) HPI rear hubs (again to fit front axles, these are the only used part included) Turtle Racing shock tower brace combo (black) GH front shock supports (black) GH rear shock supports (black, not fitted but included) HPI hubs carriers x3 (2 built up with bearings and fitted) Darksoul billet servo saver Threshold servo saver spring support HPI complete steering assembly HPI front bulkhead MR-M stainless steel steering arms GA Motorsport Teflon coating upper arm ends Swingy p shock limiting cables Think that's everything, there are a few other spares in the box but nothing major. Everything fitted so far has all been fitted with blue loctite where necessary. There are a few little bits that need sorting on what has been done so far, these are: - Shim hinge pins (only front lowers that really need doing, 2x M8 washers will do this) - Make or buy camber spacers for upper arm ends (again could be done with washers to make a 2mm and 4mm spacer for each side) - Shim front hubs to remove slop on the axles (have a link for the kit, only Edited July 1, 2014 by Jim-Bob Quote Link to comment Share on other sites More sharing options...
madmo Posted June 25, 2014 Share Posted June 25, 2014 Hi mate I'm after something like this to build...have you spent 1 Quote Link to comment Share on other sites More sharing options...
Jim-Bob Posted June 25, 2014 Author Share Posted June 25, 2014 Hi mate I'm after something like this to build...have you spent Quote Link to comment Share on other sites More sharing options...
Jim-Bob Posted June 27, 2014 Author Share Posted June 27, 2014 Will split if there's enough interest! Quote Link to comment Share on other sites More sharing options...
vandalbulldog Posted June 27, 2014 Share Posted June 27, 2014 Would be interested in the chassis if you split... Sent from my GT-I9505 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Madmini Posted June 27, 2014 Share Posted June 27, 2014 I would be interested in the bumper and shock tower brace if you spilt Quote Link to comment Share on other sites More sharing options...
marder Posted June 27, 2014 Share Posted June 27, 2014 Rpm front arms for me & the hubs Quote Link to comment Share on other sites More sharing options...
SirusDviruS Posted June 28, 2014 Share Posted June 28, 2014 Mr-m's here Quote Link to comment Share on other sites More sharing options...
Stevie.no1 Posted June 29, 2014 Share Posted June 29, 2014 GA Motorsport Teflon coating upper arm ends Quote Link to comment Share on other sites More sharing options...
Jim-Bob Posted June 29, 2014 Author Share Posted June 29, 2014 Sorry for the late reply guys, been away all weekend with no internet, looks like splitting will be the way forward, I will get some prices sorted tomorrow (probably can't post anything until I'm off next week though). James 1 Quote Link to comment Share on other sites More sharing options...
Jim-Bob Posted July 1, 2014 Author Share Posted July 1, 2014 (edited) Prices for parts are as follows, all are unused, just assembled so there may be traces of thread lock present, only part that is marked is the front upper plate, everything is in mint condition! Prices include delivery and paypal fees. I-RC chassis: Sold I-RC chassis brace: Sold Mr-m steering arms and hardware: Sold RPM front arms: Sold Front hubs, with I-RC bearings, vertigo clipless axles, vertigo extended rear hubs, HPI front and rear hubs (used with come with red Monkey Nutz): Sold GH front shocks supports: Sold TR shock tower brace: Edited July 8, 2014 by Jim-Bob Quote Link to comment Share on other sites More sharing options...
marder Posted July 1, 2014 Share Posted July 1, 2014 I will take RPM FRONT ARMS Quote Link to comment Share on other sites More sharing options...
SirusDviruS Posted July 2, 2014 Share Posted July 2, 2014 I will take the RPM Front bumper Have messaged you for a package price on: Mr Ms RpM front bumper GH shock supports Cheers Quote Link to comment Share on other sites More sharing options...
Madmini Posted July 2, 2014 Share Posted July 2, 2014 Pm sent Quote Link to comment Share on other sites More sharing options...
Jim-Bob Posted July 2, 2014 Author Share Posted July 2, 2014 All PM's replied to, will update list once payments are received. James Quote Link to comment Share on other sites More sharing options...
marder Posted July 2, 2014 Share Posted July 2, 2014 All PM's replied to, will update list once payments are received. James Paid via paypal Rpm arms Fullkill linkage Hpi steering assembly Thanks Steve Quote Link to comment Share on other sites More sharing options...
Jonr140 Posted July 3, 2014 Share Posted July 3, 2014 ill take the axel package for 25 pounds please can you send me your payment info via pm please Quote Link to comment Share on other sites More sharing options...
Jim-Bob Posted July 3, 2014 Author Share Posted July 3, 2014 ill take the axel package for 25 pounds please can you send me your payment info via pm please PM'd Quote Link to comment Share on other sites More sharing options...
Stevie.no1 Posted July 5, 2014 Share Posted July 5, 2014 Pm'd Ref. GA Motorsport Teflon coating upper arm ends Quote Link to comment Share on other sites More sharing options...
Jim-Bob Posted July 5, 2014 Author Share Posted July 5, 2014 Pm'd Ref. GA Motorsport Teflon coating upper arm ends Replied Quote Link to comment Share on other sites More sharing options...
Jim-Bob Posted July 7, 2014 Author Share Posted July 7, 2014 All parts paid for so far have been posted this morning James 3 Quote Link to comment Share on other sites More sharing options...
SirusDviruS Posted July 7, 2014 Share Posted July 7, 2014 Nice one Quote Link to comment Share on other sites More sharing options...
Jim-Bob Posted July 8, 2014 Author Share Posted July 8, 2014 List updated, have some spares and tools in the box to add too so either tonight or tomorrow I'll start a new thread and picture everything that's left James Quote Link to comment Share on other sites More sharing options...
Jonr140 Posted July 9, 2014 Share Posted July 9, 2014 recieved my parts today thanks mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.