mini-z-awd Posted April 17, 2015 Share Posted April 17, 2015 (edited) iam down one mod as its going to a new owner tomorrow but i still have 5 left and one still to build well fit a voltmeter and i already have my eye on a new mod to be build well not really built but take one of my other ones i built up apart and add a new chip in there instead of the mosfet set up its running right now hopefully next week all have it up and running. rusty1103 if you want some bvc coils for your tank let me know i have a couple of new ones here i have no use for sold my nauty tank last year and forgot i had them Edited April 17, 2015 by mini-z-awd Quote Link to comment Share on other sites More sharing options...
Rover Man Posted April 17, 2015 Author Share Posted April 17, 2015 And tonights vape is...................................... Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted April 17, 2015 Share Posted April 17, 2015 And tonights vape is...................................... that`s still got tobe one of the coolest and weirdest mods you can buy Quote Link to comment Share on other sites More sharing options...
Rover Man Posted April 17, 2015 Author Share Posted April 17, 2015 plus it works really well even with the poor battery time. Fits in the hand perfect lol Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted April 17, 2015 Share Posted April 17, 2015 plus it works really well even with the poor battery time. Fits in the hand perfect lol that`s what put me off buying one poor battery time if you could get a 18650 version that would be better Quote Link to comment Share on other sites More sharing options...
Rover Man Posted April 17, 2015 Author Share Posted April 17, 2015 Yep but i got it to use at home so its not a big issue. Just have 2 batteries Quote Link to comment Share on other sites More sharing options...
Garry45 Posted April 18, 2015 Share Posted April 18, 2015 Does anyone on here make coils 1.5/2.0 for the mini pro tank 3 or no where the cheapest place to get them from??? Run the MVP V2 :-) Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted April 18, 2015 Share Posted April 18, 2015 (edited) Does anyone on here make coils 1.5/2.0 for the mini pro tank 3 or no where the cheapest place to get them from??? Run the MVP V2 :-) a few people on ebay make and sell coils worth a try or you could make your own its quite easy you just need some 28awg .30 or .32 kanthal wire i would suggest the .32 would be better as it will take less winds to get what you want and it will fit better and some cotton i do my own for the kayfuns i have Edited April 18, 2015 by mini-z-awd 1 Quote Link to comment Share on other sites More sharing options...
Hyper-d Posted April 18, 2015 Share Posted April 18, 2015 Does anyone on here make coils 1.5/2.0 for the mini pro tank 3 or no where the cheapest place to get them from??? Run the MVP V2 :-) These are greathttp://virtualvape.co.uk/shop/atomisers/unicoil/ Best 1 Quote Link to comment Share on other sites More sharing options...
Garry45 Posted April 19, 2015 Share Posted April 19, 2015 These are greathttp://virtualvape.co.uk/shop/atomisers/unicoil/ Best Quote Link to comment Share on other sites More sharing options...
Garry45 Posted April 19, 2015 Share Posted April 19, 2015 a few people on ebay make and sell coils worth a try or you could make your own its quite easy you just need some 28awg .30 or .32 kanthal wire i would suggest the .32 would be better as it will take less winds to get what you want and it will fit better and some cotton i do my own for the kayfuns i have I was going to have a go at making my own but would probably break more than I make lol I normally purchase off ebay but ive had some dud coils which annoys the hell out of me and they were supposed to be original Kanga ones but doubt they were. Will see how I get on with this one but thanks for the advice :-) Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted April 21, 2015 Share Posted April 21, 2015 built this up today it was my little blue mosfet box mod but it is now running a yihi sx350 60w chip still have some wiring todo then its done Quote Link to comment Share on other sites More sharing options...
Hyper-d Posted April 28, 2015 Share Posted April 28, 2015 What cotton do you guys use? Recently bought some koh gen do pads off eBay but seems to be muting the flavour compared to my old stuff. Quote Link to comment Share on other sites More sharing options...
scrumpy jack Posted May 1, 2015 Share Posted May 1, 2015 Eventually managed to make a start on building my first box mod. started to chop up the Burr wood trinket box I brought off e-bay. Not an easy process with a junior hack saw! and actually a bit of a headache figuring out where to cut it to create a smaller box...and I'm no carpenter that's for sure! ended up with this...obviously pretty rough still, but I have a dremel and plenty of sandpaper. I though it would actually be really nice to use either an aluminium plate or brass plate for the final side, I can mount the firing button on it and also possibly have the USB charging port there as well also started on the electronics, got the resister wired on the mosfet and also soldered up some cables to it: thats about it for the moment, here's a few picks of the unfinished box next to my MVP for size comparison..It will end up a bit thinner after I neaten up the cut sides a bit I will add an update if anyone's interested when I have done more Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted May 1, 2015 Share Posted May 1, 2015 Eventually managed to make a start on building my first box mod. started to chop up the Burr wood trinket box I brought off e-bay. Not an easy process with a junior hack saw! and actually a bit of a headache figuring out where to cut it to create a smaller box...and I'm no carpenter that's for sure! ended up with this...obviously pretty rough still, but I have a dremel and plenty of sandpaper. I though it would actually be really nice to use either an aluminium plate or brass plate for the final side, I can mount the firing button on it and also possibly have the USB charging port there as well also started on the electronics, got the resister wired on the mosfet and also soldered up some cables to it: thats about it for the moment, here's a few picks of the unfinished box next to my MVP for size comparison..It will end up a bit thinner after I neaten up the cut sides a bit I will add an update if anyone's interested when I have done more that`s looking really good wish i had the baa`s to do something like that but iam just not brave enough right now lol are you going to the mangetize the side door or will it be glued on so its just a box just wondering i know i would go for a magnetic door just for safety`s sake. here my two newest box mods both made using domino`s box i got at a car boot cheap one is a single 18650 and the other is a paralell setup both are mosfetted Quote Link to comment Share on other sites More sharing options...
scrumpy jack Posted May 1, 2015 Share Posted May 1, 2015 Yes, I have some tiny rare earth magnets to hold the back in place. That Domino box looks brilliant! Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted May 1, 2015 Share Posted May 1, 2015 Yes, I have some tiny rare earth magnets to hold the back in place. That Domino box looks brilliant! earth magnets are great i use them on my box`s the best thing about them is when you think the glue or epoxy is dry and you check the poliraty and it is`nt stuck down yet so you have to do it all again which reminds me i need to change one on the twin box box i put it on backwards so does`nt work right it pushes away instead of holding. the best bit about the domino box is they are so light with a single batt in there even the twin setup is quite light Quote Link to comment Share on other sites More sharing options...
scrumpy jack Posted May 1, 2015 Share Posted May 1, 2015 Can't believe how strong those little magnets are, only 4mm in diameter I think I got, but by god they have some power- I'm really careful not to put them near my pc or phone as I'm sure they will wipe all the data off them! Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted May 1, 2015 Share Posted May 1, 2015 Can't believe how strong those little magnets are, only 4mm in diameter I think I got, but by god they have some power- I'm really careful not to put them near my pc or phone as I'm sure they will wipe all the data off them! they could do that also don`t let them bang into each other either they can break up i had some for a mech mod and i dropped one onto another one and it just went pop broke both magnets into 5-6 peices Quote Link to comment Share on other sites More sharing options...
Philxj4L Posted May 2, 2015 Share Posted May 2, 2015 MVP3.0 @ Quote Link to comment Share on other sites More sharing options...
Philxj4L Posted May 11, 2015 Share Posted May 11, 2015 (edited) Aspire have a new box mod out, the ESP30. Looks nice, around Edited May 11, 2015 by Philxj4L Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted May 11, 2015 Share Posted May 11, 2015 Aspire have a new box mod out, the ESP30. Looks nice, around Quote Link to comment Share on other sites More sharing options...
Philxj4L Posted May 11, 2015 Share Posted May 11, 2015 Good spot ! I hadn't seen any bad reviews. Seen a few reviews, they where positive. I'll let you know how mine goes, couldn't resist as I'm a proper sucker for carbon fibre, the old biker in me is hard to kill off. Quote Link to comment Share on other sites More sharing options...
Philxj4L Posted May 13, 2015 Share Posted May 13, 2015 (edited) The ESP30 turned up today (free post from Amazon) so first look and impressions. Nicely packaged and seems to be well finished. It's a bit smaller, and much lighter than the MVP30, but the kanger sub tank mini fits really nicely. It has a light fire button. This and the light weight works well for me as due to MS my hands and fingers get a bit weak as the evening/night goes on. The adjuster rotating knob it smooth (no click adjustment) but not loose and seems to work fine. Can't see any future issues as I run at 18w for any of the liquids I use, so won't be changing settings all the time. It has ally top/bottom plates with carbon or carbon effect main case. Not sure if it's legit carbon or not, but it looks really nice with a high gloss finish with stylish logo branding. It doesn't switch off, but 5 rapid clicks locks/unlocks the fire button, so safe to leave in your pocket or bag. The blue LED side display is clear and shows battery level, watts and ohm rating. All in all, first impressions are good, and my usual 18w setting works as well as the MVP30 on the subtank. It's an ok option at the going price of Edited May 13, 2015 by Philxj4L Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted May 13, 2015 Share Posted May 13, 2015 looks good and all be following to see what your thoughts are on it with more usage down the line Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.