Search the Community

Hi, Testing the water here, if I don't get the asking price or suitable trade, I'll happily keep it. So here goes, Tamiya Scania r620 6x4, comes ball raced, with exhaust stacks, powered fifth wheel, metal geared steering servo, futaba servo on gear change, mesh done on front grill and the limited edition orange body which has been detailed nicely, will also come with a Tamiya silver can motor and Tamiya esc. Can come with a Spekky rx too if required for a little extra. Couple of little bits to mention, windscreen wipers are missing and there is a tiny mark near the o/s spot lamps where previous owner put too big a screw in. Otherwise seen very little use. Looking for

Fully built but shell needs painting and decals applying, futaba servo,teu101bk,silver can , 2.4ghz acoms techniplus stick tx/rx(battery cover missing) but 4 dura cells supplied all you need is a battery to run , all tested and works . All other builds to complete look there (man and spotlights are present) ran once on grass . Box n manuals present but box needs corners regluing , 70 collection only , Boston Lincolnshire Only thing I can see that needs tidying up is the cutting of the shell ty

I bought this from here in december but it's not me and I can't be bothered with it if I'm honest. I have used it three times since buying it for around 10 minutes each. It came fairly hopped up to me but I wasn't told the centre HD cups have wear as it was used on 3S. This was silly fast so I've converted it back to 2s. Well used but maintained. Below is the advert from when I bought it: Turnigy trackstar sct esc 120A (with program card). Castle 3800KV 4 pole motor with cooling fan. T- bones fitted front and rear. Proline powerstrokes fitted all round. Brand new shell for you to paint as you desire. Rough basher shell with much gorrilla tape also included. Cvd`s front rear and center and rebuild kits /spares included. Stainleess hardened drive cups on the rear and centre drive-line. 1 run old rebuilt and shimmed diffs with new oil and new crown and input gears. New slipper pad fitted. One spare also included. New bearings (not pictured) and comprehensive spares package included. 3s and 2s spur and idler gears. Traxxas waterproof steering servo. Almost new big joes. I would like

It's currently on eBay for

Mugen mbx7 eco with hacker 1900kv motor and hacker esc with program box. It also comes with a hobbywing esc which is currently fitted instead of the hacker esc. This is because it was used in the winter and the hobbywing is waterproof and didnt want to risk the hacker esc. Steering servo is a savox 1210. Unfortunatley i dont have the original shell but i do have a new, unpainted shell for. Overall in good nick, most of the bearings are brand new and oils just changed. Looking for 280 posted Located in evesham near worcs.

FTX Punisher for sale! I only got this recently, but due to developements in my family, plus my Bajas gearbox blowing itself to pieces and the fact I've put a tank through this and 4WD just really isn't my thing, I'm putting it up for sale. It's got a 23cc CY, which pulls really nicely, starts great and holds a tune perfectly, I will happily do a running video when the rain stops. It has an FG race pipe, King Cobra tyres, front and rear alloy chassis braces, newly installed Swtichblade killswitch, extras also include two BNIP pairs of outdrives, a complete set of Punisher wheels and tyres, along with some other odds and ends. The battery (as you can see) has been moved onto an alloy plate bolted to the cage for ease of charging and so on... It's very secure, also holds charge fine and charges fine. Car overall runs very well, pipe sounds nice, no cracks or anything. New silicone coupler put on by me to join the pipe itself to the manifold. Shell isn't in amazing condition but it's perfectly usable and bashable, front portion cracked hence the duct tape, could be fixed more permenantly with some shoe goo/dry wall tape or similar. Theirs a couple of bits on the throttle servo that have snapped, it's still held in place, but I wanted to mention this in the interest of being completely honest in the advert... But it does still hold and it worked fine for the tank of fuel I put through it. Please note theirs no rx/tx included in the sale. Price wise I'm looking for

Hi guys, I am selling my Proline Pro2 2wd short course truck, as I just don't use it anymore, due to getting into 4wd sc and 1/8 e buggy. This is one of the first 50 made as can be seen from the certificate, and has virtually every hop up part in the Prolive catalog + a whole load of spares, the Hitec w/proof servo will be staying as will the Hobbywing w/proof esc/motor combo (4700kv). This has only been used on a dirt track once, and did a winter series on Tarmac, so has been used but definitely not abused. Sale does not include the tools or the box containing the spares, there is also no wheels or tires, but I will include a body which is scratched but perfectly usable (no splits). I am looking for

hi all decided buggys aint for me so its going ,, its a losi 8 eu 2.0 i brought from a racer ,, i have ran it twice at my local track (ndor) and i just find the buggys too sharp for my driving skills so im after a truggy or may even go for a truck either must be brushless ,, any way its full eu spec with added alloy castor blocks and spindles,,proline wheels with losi stepstud tires in decent condition,, brand new unrun bitty design shell,, brand new unrun bitty design wing,, electrics wise it has a ace ds1015 on the steering,, castle mamba monster esc,, hobbywing 2000kv motor ,,, its got a metal 45t spur gear instead of the plastic one that comes with the conversion kit,,, its also got a spare set of trimmed minipins and a well used proline shell,, im looking to trade this either artr for artr or as roller for roller,, im only interested in electric and nothing smaller than 1/8 ideally id like a decent truggy roller or maybe even a lst2 electric roller ,, all i can say is try me ,, im based in derby but could meet within a sensible distance

Traxxas Slash 2wd. I bought this just before christmas with the intention of racing in the Short Course Nationals again but due to many deciding factors I've had to give up racing. Its been sat on a shelf since I got it. I'm now concentrating on scale building. The Slash is a 2wd with a LCG chassis. It comes with the following...... Hobbywing 4 pole 4000kv brushless motor Hobbywing WP-SC8 (2-4s lipo) ESC Program card 5000mah lipo battery Adjustable alloy shocks with various springs RPM rear arms Several spares inc RPM front arms, bearings and even some shock sox! Team Durango body, used but no cracks or splits. Recently purchaced Proline Baja Beetle shell. Its been cut out but is unpainted. And all the wheels & tyres in the pics. All have had a bit of use but will last ages. Theres a full set of road tyres, a set of unused foam wheels and tyres and various pairs of different pattern/compounds. A good varied selection if racing! You will need your own RX & TX. I would consider a swap/trade/px (meet up only) for an Axial Crawler, Tamiya truck, Tamiya CC-01. or Sell for

Putting this up for sale simply as I've had it for a while now and it's time for something new. Sadly I need the space and funds to do so and I fancy something 4WD next. Recently rebuilt with a new chassis, new bulkhead, new steering assembly, basically complete new front end and chassis. Also has the DE Racing front chassis brace. It's running the stock SC700-BL ESC with a HPI Flux 4000kv motor, very quick even on 2s, also has the stock AE SHV 1504 servo which is more than enough for this truck, you'll need your own tx/rx. I've made a small plate for the ESC to stick to, it's in there with Gorilla Glue and the plate is simply held in with two countersunk bolts and nuts, really solid set up. Also included are some brand new Team Associated wheels, brand new stock tyres, brand new foams, brand new Fastrax Bulleye tyres, as well as the complete set on the truck. Theirs a couple of minor cracks in the usual places (very front and also rear corner) I've not even bothered to fit them because theirs not a lot of point. Also fitted is the upgraded (not sure if they're FT or not?) fully adjustable alu threaded shocks, sooo smooth and makes it handle really nice, I will also include the originals as well, which are perfectly working, just not threaded. I'll also include all the original parts from the rebuild, almost most are broken, they might still come in handy in future, keeping to the rule of never throw anything away, they're included I don't have the original box, but it'll come in a Losi SCTE box, well packaged. I think that's covered just about everything. I'm looking for

Hi guys, thinking of selling my carson attack, I purchased this as a project as it was completely knackered but I've ran out of time and money to go any further. I've also majorly busted my hand so I can't work on it now either. What I've done so far is replaced every single bearing, fitted front upper alloy arms, rear alloy hubs, new 29 cc zenoah head, new fuel line and filter, new spark plug, new ignition cable (not fitted) new 2.4ghz maverick radio gear, new metal gears all round. What it will need is a new carb, a new exhaust and a clean, it got dirty in testing but like I say I've busted my hand so I can't even clean it. After the re build it's only had 4 runs I would like

Moving away from r/c now as i ve taken interest in something else and wont have time in the near future to do anything with my models,so i have my truck for sale along with my 5B in a seperate ad,this truck has been reliable and not abused,the steering servo is pants being a standard km one but the rest of the truck is good,slight play in the front bottom arms on the lower pins but nothing major,its got the km rear shock brace and fastrax tyres except one rear as it split and i didnt bother replacing it,has a new switchblade fitted and the standard hump pack that comes with it as new,it is on my spectrum system so i cant supply it with radio as that is with my other car,so all this would need it tx/rx to be used,it runs very well and holds its tune as it should.check the pics of it and any questions please feel free to ask.it is standard apart from the tyres and rear tower,the body is good all over apart from very light damage to the rear ,see pics.

My HPI Baja - Essex Its sat in the garage for about a year. as from picture i cracked the side of the engine where the coil is i believe its the coil why it won't start It needs a good Strip down and rebuild and clean. Also the shocks leak Its got a pair of Genuine hostle MX rears and the Genuine DDM Dominator

Took this in px last week,it displays excellent compression and easy starting and is complete but for tx and rx but can be made ready to run if needed with a new Flysky GT2 radio(still boxed currently) and starting gear and charger. It needs a new rear tyre or some 17mm hex wheels and tyres. I have just found a full set of replacement wheels and tyres which will replace the pictured items. Its got signs of use but is fairly fresh-ive fitted a brand new clutch and spring seat today as these were needed and i had the spares and the carb and back plate have also been re-sealed returning tick-over and tune to rock solid. The model is classed as 1/10th supersize or 1/8th because of the 17mm hex's and wheel size. The buggy would benefit from a strip and clean if your gonna love it but diffs drive train and shocks are all quiet and smooth including the twin braking system which is very efficient,im sure this will make somebody a great nitro model. 70 notes delivered ARTR or 100 RTR or collection in Gateshead is welcome saving 5 quid on the 3-5 day tracked and insured couriers. Exchange/px for Baja 5b alloy bits-not suspension parts or engine outer cases/pullstart etc what have you . Will update pics soon. http://www.msuk-forum.co.uk/gallery/image/33087-/ http://www.msuk-forum.co.uk/gallery/image/33082-/ http://www.msuk-forum.co.uk/gallery/image/33086-008/ http://www.msuk-forum.co.uk/gallery/image/33083-005/ http://www.msuk-forum.co.uk/gallery/image/33085-/ http://www.msuk-forum.co.uk/gallery/image/33084-/ SOLD Yoshi

I am selling my tamiya lunchbox. I never use it for while. It has few upgrades done on it. it drove straight and handle really well. 13.5T speed passion ultraman v3 BL motor. tamiya TBLE02 ESC FXP double wishbone conversion. Metal body mounts. 5th shock mods oil filled ansmann shocks. new chassis tub. centered servo, 3 batteries (1x 3250mah lipo, 2x 2000mah nimh) plus few spares including rims/tyre, and random plastic bits, instruction manual & box. Body shell are battered but look ok. wearing box art paints/decals. Just needed your reciever / radio set to drive it. Im asking

Reluctantly selling my hpi Baja.....this is not your every day Baja,almost every part has been upgraded... Engine Trevor Simpson/obr engine---only seen about 15 tanks max 8-9hp almost every turtle racing part available has been installed,irc shocks,flm life time warranty arms best in market,hitec steering servo,savox throttle,super bee,carbon roof scoop,extended hubs,gbe braces.....list goes on and on....... Car comes with boxes of spares,some extra wheels,gbe side mount exhaust rare!+loads more No tx rx Looking for

My loved disco is up for sale. Naza Lite Stock Dji motors and escs with both graupner 9x4.5 and dji 10x4.5 props. Comes with 2x 3s5000. Comes with Frsky L9R RX No FPV gear. Will include a TBS ChipchipV2 Camera for a extra

Need must and all that, be gutted to see this go The strip is orange and not yellow, my camera is stupid...... Hobbywing sc8 Hobbywing 3656 4000kv Xpert wr4401 servo (

Hi, I would like to offer for sale my HPI Savage XL Monster Truck, which comes with various upgrades...which I built myself from spares. There was a time when I could spend hours just working with these trucks for fun and got to the point where I was competent to operate them safely and strip down and rebuild, however, I just do not have the time available or the interest now to remain with the hobby and so am letting my whole collection go. This truck is supplied as a rolling chassis for fitment with an engine of your choice, however I do have an HPI NitroStar 4.6v1 and v2 engine's available as well as a HongNor 4.6 engine, all brand new and unused either one of which will be supplied with the truck. The truck is supplied with a rotstart v.2 starter unit. Two bodyshells are provided as seen in my pictures. Two sets of brand new and original wheels and tyres are supplied, the original XL chrome terrapins and a set of orange MTA4 wheels and tyres. The truck is fitted with a 3-speed transmission and includes a chrome exhaust and header pipe. Adjustable upper turnbuckles are fitted as are strengthened lower tie rods, i.e the newer toughened version. The electronics box is fitted with the HPI battery charge indicator lights. Anodised orange aluminium metalwork is fitted throughout. Big bore shocks minus oil are fitted......requiring the oil of your choice depending on your plans for the truck. Dual fibre disc brakes are fitted... FLUX HP composite gear towers are fitted... FLUX HP unbreakable differential drives ( Black ) are fitted 47tooth metal spur gear is fitted... A HPI accessory bag will be included, which is basically batteries and spare 'smalls' THIS ITEM WOULD BE BEST SUITED FOR PERSONAL COLLECTION FROM DARTFORD, KENT, UK, ADJACENT TO THE M25 QEII BRIDGE. I would hope to let this car go for around

ok i have to clear out even more stuff as i need the space so first up is this DRQ250 quad copter comes with spares new props 4x RCX 1804-2400kv motors Q brain ESC 20A and a full Naze 32 flight controller This is the full NAZE32 flight controller with compass and barometer Had about 30 flight in my garden just for setting up just add transmitter lipo and receiver and your flying. but please remember to remove props while setting up. this lot cost me about

Right guys, I have decided that these sized quads are not for me, I'm more for q4/x4/250 sized I think! The frame is similar to the DJI F450 flamewheel, flies really smooth and handles awesome! It has the turnigy plush 30a esc's, which in my 3 years of flying experience, have never let me down, if I am building a plane/heli/quad then I try to use these esc's as they are 'bulletproof' as they say and are very programmable! Powered by 4 of the NTM Propdrive 2836 1200kv motors this quad has gobs of power, goes up like a rocket on full throttle and is faster than any other quad I have seen, the general rule of thumb is that the power of a quadcopter has to be double the actual weight of the quad when fully laden....a quad weighing 1kg should have at least 2kg of thrust to fly well! This quad weighs a mere 1.086kg and has a whopping 6kg of thrust For the flight controller I used the KK2.1.5 board, it is nothing special and doesn't have GPS but is more than ample for a general flyer, I would even consider it good for a sports flyer as it is capable of flips and rolls when the settings are turned up Has built in power distribution board on the bottom layer to keep the weight down, all esc's and battery lead (with voltage detection) are soldered directly on to the PCB board/bottom shelf Comes with 2 x turnigy 2200mah lipo's which give around 15 mins flight time each (quad has built in low voltage beeper to warn you to land before over discharging) Hasn't really had much flight time, maybe 8 packs through it, you can see from the lipo's that there is literally no wear on them Does not come with radio gear as I need if for my other rc's, will basically be plug in calibrate and off you go Price is

Tamiya CC-01 Unimog S O L D ARTR - Just needs 2ch transmitter & receiver. The body shell is from my Bodgit & Scarper project and the chassis is from a CC-01 shelf queen that I had (almost no running time at all). The chassis is basically stock but is fully ball raced with an RC4WD 45t crawler motor (brushed), crawler type tyres, 10kg servo and a LiPo or NiMh compatible ESC. Shocks are oil filled plastic body ones bought from Blacksmithproducts and work quite well. An RC4WD rear tube bumper has been fitted as well as an aluminum skid plate at the front. The steering has been ball raced as well and is now much better than stock. I'm including an unused Dynamite 1800mah NiMh battery pack. I can include a basic trickle charger for no extra charge if needed. John

Back up for sale, I couldn't bring myself to let it go last time, but omething has to give! So here goes... The chassis is perfect, it runs exactly as it should and everything functions fine. Couple of scratches on the bottom in a couple of places, but that's nothing. Tamiya TEU-101BK ESC, RC4WD 55t motor, which although is usually very slow, on the faster gear, it's got good wheelspeed and heaps of torque! Alturn 780 servo on steering duty, I don't use both gears in the two speed, just leave it in the higher gear, so no servo included there. No tx/rx or LiPo. Shell is finished to a good standard, could do with a couple of tiny touch ups on the black (if I'm being extremely fussy/picky) Including full Tamiya Hilux interior (not fitted, brand new) Toyota lettering across the back as you can see, 4WD Hilux badges on each side, RC4WD steel rear bumper and some nice detailing overall. Pretty sad to see it go, but in truth, I could use the funds for my other models, not to mention I don't need to keep both this and the Gelande 2 and I simply prefer a Land Rover to a Hilux, that's what it's basically come down to! I could provide a Spektrum DX3C with an SR3100 rx for extra, but happy to keep those as spares if they aren't needed. Will of course come in original box, with instructions and all the left over bits from the build. I'm more than happy to shoot a video of it running if anyone wants. Looking for

solid wood this is hull only size L 43" W 12-3/4 sute electric or nitro will post but will have to take rudder off to fit into box looking for

Hi Got a xtm xt2 for sale only had 5tanks of fuel through it so has loads of compression and runs really well, very fast buggy, still in really good condition has usual scrapes underneath. buggy has not been hammered as it had the first 3 tanks ran in slowly then the 4th and 5th tank on a large open field. only down side is I've lost the receiver so will need a new one, also no shell as its never had one. I had a old hyper 7spoiler lying around which I fitted and works just as good. http://www.msuk-forum.co.uk/gallery/image/32899-/ http://www.msuk-forum.co.uk/gallery/image/32898-/ http://www.msuk-forum.co.uk/gallery/image/32897-/ http://www.msuk-forum.co.uk/gallery/image/32896-/ http://www.msuk-forum.co.uk/gallery/image/32895-wp-20150329-20-18-52-pro/ http://www.msuk-forum.co.uk/gallery/image/32894-/