C tay

I’ll give it a try bud.

Glitch buster didn’t work, steering was still going mad. Thank for trying to help bud👍

Took out my diffs the other day, to find they use a very small Phillips head screw. I didn’t have a small Phillips head driver to take it apart. What weight oil is in the stock diffs?

Anyone took apart diffs yet? I think they use 1m oil? Were the diffs filled?

Yes I’ve ordered one👍 The truck will be in the bin before i buy another esc for it.

Thanks a lot for the info mate, I’ll order one see if it works. Would of though a 120amp Max10 esc would be way more than enough power for it not to jitter.

Hi lads, I have a problem that’s been a pain for months. To start it off, I ran my mt10 for the first time 5-6 months ago, broke the arm at the skatepark fixed with rpm’s. After it was fixed the servo started to jitter real bad, so my first guess was it’s the servo. I then plugged in a new servo into the receiver, with that one also jittering. So then the problem I thought was the receiver, ordered a dumbo transmitter and receiver off banggood. installed that for it still to jitter. I’m new to rc so my knowledge isn’t the best, I have met a local group that I go crawling with. One of the lads had a look at it for me, tested the servo on his servo tester was fine, so was the receiver. He then said it was my esc not getting enough amps and that’s the problem. I then sent an email to seller saying the esc is faulty, I used the truck once for about 15mins. Got told to send esc back for them to check. I’ll be honest with you I couldn’t be arsed and didn’t really want the same esc after it pood on me. Would of thought they’d of took my word for it and sent a new one but owell. Ordered a hobbywing ezrun Max10 sct 3200kv combo, Was absolutely buzzing to get the truck running again after soo long. So I then fitted it calibrated the transmitter to esc, servo then started to jitter again. I felt like crying, what’s the issue I’m soo confused. All help much appreciated.

Anyone from Bristol that goes out on the crawl on weekends? I have a few lads who I crawl with but they go on Monday’s , I’m at work so it’s not possible for me to go. Is there anyone that crawls on a weekend that would be happy to meet up on a weekend for a crawl. I got some great locations in bristol. Cheers

Doubt it’ll be for sale in the UK. I hope it will.

Well I did say it was light😄 my bad, must’ve took pic with phone wrong way round👎

I’d say my element ecto is a light rig especially up to my trx4 bronco.

Few pics of the trx4 bronco. Check out my mates YouTube channel for great crawling vids of our crawling group. (heady2008)

My servo was jibbering on mine turns out it was the esc so will be sending an email for a new one. The truck was used once.

What’s the best combo I can get for my ryft to crawl with. The stock setup is pants.

Mate it’s awesome check out (heady2008) YouTube channel he has a few vids of my ecto on there.

So I’ve had mine for maybe 4months now and only ran it twice due to braking an arm on my first run. Which I then waited For months for the rpm arms to be back in stock. After fitting the arms, I took it out for a bash only to be let down by the servo. It’s jittering and truck goes where it wants to. What is this problem? I did unplug the stock servo, and plugged in a 25kg banggood servo. The result was the same, Could it be the receiver box? Any help will be much appreciated, I’m still new to the hobby cheers.

Got my ecto coming tomorrow. There in-stock everywhere now. 👍

I did bind and calibrate it when I first took it out the box. Maybe I went wrong somewhere, when I find some rod ends In-stock, and have it working, I will try the procedure again. Cheers mate👍

Thanks I did read the link it says about the way the receiver is mount can be the reason the gyro is playing up. As I said with mine the gyro is going opposite way. Here’s a pic of my receiver the way it was installed out the box, do you think if i switch it over a 180 turn it will work? Also I’m the pic you can see the rod end that snapped is the straight ones better? Cheers

Does anyone have a uk link, to some m4 straight rod ends. I can’t find any in stock anywhere. Cheers👍

It was one of the front ones. I’ll have to order some of the straight ones. Cheers bud👍

Ah right thanks👍

Thanks bud. Do you know if anyone makes stronger rod ends for the ryft, as I snapped one yesterday.

My gyro is not working properly, my wheels turn it the same direction as the car, when I shuffle it. How do I fix this?