funkymonki

Any one know the Sh .25 p5 factory Lsn setting? its the engine with my hong nor x1x-cr

hi guys, just a quick update. ran tank 5 at half throttle. tank 6 at 3/4 throttle then tank 7 touching wot for 2 secs at a time tank 8 i ran at 3 second bursts of wot i think im done but sounds silly. how will i know when its broke in ??

excellent cheers guys :-) al start off tank 5 to 1/2 throttle tank 6 to 3/4 tank 7 to 1/4,1/2, 3/4 then tank 8 to full throttle then the joys of tuning :-) the fuel and smoke are still flying out of the exhaust so its running very rich :-) had to reset the hsn , factory was set to 2, 1/2 turns. so i reset it to 3 turns

hi folks started breaking in my x1xcr buggy in yesterday wondering if i am doing this right? any help would be appreciated. HSN 3 turns out LSN 3 turns out idle : 1mm Yesterday heat the engine up to 60 degrees c with a hair dryer then ran tank 1 at idle and temp never went above 70 degrees c let it cool at BDC ran tank 2 at 0-1/4 throttle watching the temp it never went above 90 degrees c , had to turn the Lsn is 1/8th of a turn clockwise as it was cutting out when touching the throttle. tested at end of tank by pinching the fuel line and the engine revs went up a little then cut off. let it cool at BDC and put some after run oil in. Today ran tank 3 let the engine heat up then ran at 0-1/4 throttle and the temp went up to 110 degrees c. let it cool at BDC. ran tank 4 ran at 0-1/2 throttle and kept the temp up at 90-110 degrees degrees c let it cool at BDC and put some after run oil in. had to head home because of the rain :-( when i come off the throttle the temp drops down slowly .. am i on the right track?

Heres my new hong nor x1x-cr :-)

ave always just stuck with os.8 glow plugs mate. a stay in cold & wet scotland tho lol

Deleted Sussed it found the break in guide hidden in the box Doh sh21 - Sh28 hsn is 3 turns out from closed.. got the sh21-sh28 break in guide with my x1xcr and its got a sh25 engine. could send it to you if you want mate.

defo got a venom temp monitor so that i can do the break in and tuning to perfection :-) got 2 days off this week so thinkin il be breaking it in then. prob just use the old school method.. any views on break in ?

its defo the same as mine. Tho the one i got from modelsport came with the 2.4Ghz digital radio gear and a load of modelsport/msuk-forum decals Not sure if the one on jespares is an older model or not should contact jespares

tested the radio gear and it has a failsafe built in :-)

just now in scotland its raining 24/7 and its about 5 degrees . soon as the dry weather returns am hitting the local motocross track with it for some serious bashing ..

excellent cheers Bez

Excellent advice folks . it arrived and boy am over the moon, its already hopped up compared to what my savage was like , most parts are aluminium :-) plus it came with 2.4Ghz radio gear with in built failsafe heres a pic :-)

any ideas what these parts are. i took 2 pics , 1 zoomed in on the 3 bags. from what i can see. the top left bag is spare servo parts and the top right bag is spare screws. its just the other bag i cant figure out what its for. cheers guys