Jump to content

John_RCModelz

Members
 View Profile  See their activity

  • Posts

    865

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by John_RCModelz

  1. John_RCModelz
    Unfortunately not sorry
  2. John_RCModelz
    That's the tricky part getting someone to split the box
  3. John_RCModelz
    Stock X2 is already this piston
  4. John_RCModelz
    No none of the 2 nylon brackets work for the savox. The radio box is ok it's just the bracket isn't big enough for the servo. You could put a hpi box in but that will cost more than the alloy bracket. Unless you can pick up a hpi nylon bracket off someone.
  5. John_RCModelz
    Could always start with this piston as most of skirt is removed all ready http://www.rcmodelz.co.uk/skimmed-piston-kit-29cc-ported.html
  6. John_RCModelz
    It's being tested by Hoss http://www.msuk-forum.co.uk/profile/68-hoss/ and everybody and anybody that meets up with Northwest RC and they have had it a while now.
  7. John_RCModelz
    I'm thinking I should of watched these video's before handing over the dragon hammer for testing
  8. John_RCModelz
    https://primalrc.pinnaclecart.com/
  9. John_RCModelz
    Also vheck to make sure that the breather hole on the tank cap and rubber inside cap are not blocked
  10. John_RCModelz
    He is from Hong Kong he using drop shipping. That's why price is low as there is not uk fees paid.
  11. John_RCModelz
    Nice choice on the switchblade
  12. John_RCModelz
    Don't forget the duct tape
  13. John_RCModelz
    This had to be brought back to life.
  14. John_RCModelz
    Thankyou
  15. John_RCModelz
    Don't hold it against the company. The issue is with the administrators. As soon as that is sorted business should be as it was
  16. John_RCModelz
    If it was a warranty issue they won't deal with it as the administrators are not doing any warranty claims or returns.
  17. John_RCModelz
    Thick wire is harder to run and it dosent need to be a thick gauge to work.
  18. John_RCModelz
    Looking good
  19. John_RCModelz
    Savox 0235 Dimensions(mm): 65.8x30x57.4 Weight(g): 200 Speed(@6.0V sec/60): .16 Torque(@6.0V oz-in): 388.8 Speed(@7.4V sec/60): .13 Torque(@7.4V oz-in): 486.1 Gear: Metal Bearing: 2BB Case: Full Aluminum
  20. John_RCModelz
    Looking good. And for bending http://www.ehow.co.uk/how_8130660_bend-high-density-polyethylene.html#page=0
  21. John_RCModelz
    Link for Lee http://www.msuk-forum.co.uk/user/25607-jolly-roger-uk/ tell him the radio gear and he will advise wether it will work
  22. John_RCModelz
    We got ours yes. What was you trying to find out when you emailed them.
  23. John_RCModelz
  24. John_RCModelz
    not promo vids
  25. John_RCModelz
    Should be about april
×
×
  • Create New...