toys4x4boys Posted February 22, 2011 Author Share Posted February 22, 2011 Got a stock FG one on now Carl, tough as old boots See if these pics help, It's usually the rod form the carb, as it goes through the plastic slider on the servo, it sticks Open th ehole in the slider a little bit Or there is a full mod with all sorts of changes on the Nutech forum. But I've not nothered. Quote Link to comment Share on other sites More sharing options...
carlcurtis83 Posted February 22, 2011 Share Posted February 22, 2011 Will open the hole a little bit more then see if that helps. Cheers guys. Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted March 20, 2011 Author Share Posted March 20, 2011 Shell took a lot of bad landings, resulting n the usual nose snappage. So I've done away with the nose section, can't break it off again that way. And the front is no more exposed than with the stick buggy shell Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted March 22, 2011 Author Share Posted March 22, 2011 Vinyl Cutter + half a sheet of gold carbon look sticky plastic = Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted April 16, 2011 Author Share Posted April 16, 2011 Decided to have a go at an invisible repair to the shell Quote Link to comment Share on other sites More sharing options...
stebro Posted April 16, 2011 Share Posted April 16, 2011 :rofl: :rofl: :rofl: Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted April 16, 2011 Author Share Posted April 16, 2011 aaahhh, you've spotted it havn't you Quote Link to comment Share on other sites More sharing options...
stebro Posted April 16, 2011 Share Posted April 16, 2011 Spotted what i thought fairy dust was holding it together Quote Link to comment Share on other sites More sharing options...
Thatsliam Posted April 16, 2011 Share Posted April 16, 2011 (edited) :rofl::rofl: :rofl: FAIRY DUST screws dose it.... Wicks has our name on it! Edited April 16, 2011 by Thatsliam Quote Link to comment Share on other sites More sharing options...
stebro Posted April 16, 2011 Share Posted April 16, 2011 Oh that thing thought you had forgot to put the numbers on your number plate Quote Link to comment Share on other sites More sharing options...
The Trooper Posted April 17, 2011 Share Posted April 17, 2011 Sorry Greame what repair are you talking about? all i see is a photo of a shell? Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted April 19, 2011 Author Share Posted April 19, 2011 Shiney bits Rear diff needed a new ring gear and pinion, decided to do it right Team ZMC Alloy Gearbox & FG Style Diff Not cheap, so I hope they are worth it. Alloy gearbox is good, machining isn't show standard, but it fits together OK, and runs smooth. Diff and gears are really nice, and I now have pluggable outdrives, so changes should be easier ( if needed ! ) Gone with 30k in the diff, and gorilla snawt in the main gears. Roll on the weekend ( providing we can find somewhere to run, living at the 'seaside' has it's downsides on bank holidays ! ) Quote Link to comment Share on other sites More sharing options...
The Trooper Posted April 19, 2011 Share Posted April 19, 2011 Read this whole thread through to get me ready for my punisher... i hope all my diffs dont crap it after a few days! Quote Link to comment Share on other sites More sharing options...
stebro Posted April 19, 2011 Share Posted April 19, 2011 Ohh shiney shiney. Looks decent mate take it it went together ok then. Was thinking it going to be mad at the other spot so if need be we go to field Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted April 22, 2011 Author Share Posted April 22, 2011 Sticker and Springs Can't stop cutting vinyl Going to wear the cutter out at this rate Baja HD front springs, fitted to the FTX rear If they sort the saggy rear end, I might get some for the Mrs 2 Quote Link to comment Share on other sites More sharing options...
Spoonmeister Posted April 22, 2011 Share Posted April 22, 2011 Looking god Quote Link to comment Share on other sites More sharing options...
stebro Posted April 22, 2011 Share Posted April 22, 2011 Baja HD front springs, fitted to the FTX rear If they sort the saggy rear end, I might get some for the Mrs :lol: Don't let her hear you saying that mate or she will set the dog on you Might have to get some new stickers made up too as mine are peeleing. ou know the ones that i got Professionally made and designed for me one run Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted April 22, 2011 Author Share Posted April 22, 2011 haha. I offer no gurantee of life span, but send some ideas and I'll get some made up. Got loads of pink left Quote Link to comment Share on other sites More sharing options...
stebro Posted April 22, 2011 Share Posted April 22, 2011 Don't need no gauretee mate no where to find you Don't know what to have but think ned to respay again as black don't work as it attracks ( shows and i don't like washing) too much dust Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted April 23, 2011 Author Share Posted April 23, 2011 Quick vid, Got an issue with it throwing rear dog bones, must look into that Quote Link to comment Share on other sites More sharing options...
The Trooper Posted April 24, 2011 Share Posted April 24, 2011 Picking mine up today... cant wait!! Quote Link to comment Share on other sites More sharing options...
sonic2810 Posted April 24, 2011 Share Posted April 24, 2011 Looking good i.hope to be testing mine today with modded v1 dom.fitted Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted May 13, 2011 Author Share Posted May 13, 2011 Took advantage of freeprawns bonus points, I'd managed to have Quote Link to comment Share on other sites More sharing options...
stebro Posted May 13, 2011 Share Posted May 13, 2011 Looks good mate. What new. I know the arm, turn buckle and rose joint but is there a new mounting point too? Quote Link to comment Share on other sites More sharing options...
toys4x4boys Posted May 13, 2011 Author Share Posted May 13, 2011 Yep, the stock setup is just a rose joint each end, so you get the new top mount, bolts and bushings to fit the arm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.