just rolling Posted January 11, 2017 Author Share Posted January 11, 2017 Good work, I got rear bearing holders to fit fid ones, hopefully get my 20t pinion and spacers tomorrow and I will swop the zenoah spring to the 8000 1 Quote Link to comment Share on other sites More sharing options...
Scotty napalm Posted January 11, 2017 Share Posted January 11, 2017 Good work, I got rear bearing holders to fit fid ones, hopefully get my 20t pinion and spacers tomorrow and I will swop the zenoah spring to the 8000I run a 8k spring on my g32 mate. Absolutely mint engine strong as. Had that much compression my mate thought he seized it[emoji23]Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 12, 2017 Author Share Posted January 12, 2017 It sure takes a bit more tug than the km 30.5 with the pull start, had my baja out today with the km 30.5 engine, it went good but nothing compared to the x2 and g320 Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 19, 2017 Author Share Posted January 19, 2017 Another tank thru today and no problems horayyyyyyyyyyyy, zenoah g320 deffo makes it a lot better again, just waiting on 20t pinion to come for a bit extra top speed 2 Quote Link to comment Share on other sites More sharing options...
Fly In My Soup Posted January 20, 2017 Share Posted January 20, 2017 On 08/01/2017 at 19:10, just rolling said: X2 still alive, ordered a zenoah g320 to fit and stock engine into a hpi baja. Baja goes great but glad i swapped all the km clutch etc over, the x2 worked great but after taking the clutch etc off to fit engine into baja 1 of the 2 clutch shoes was badly worn, 1 looked new and 1 very worn, not good but worked ok or it seemed like it did, km clutch into the bin Glad to hear you over the hurdles matey!! Put a vid up!! 2 Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 20, 2017 Author Share Posted January 20, 2017 Am just glad it's a car I can hope works, got a baja aswell which is a pig to work on compared to x2, like the look of the losi buggy petrol Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 21, 2017 Author Share Posted January 21, 2017 Another tank thru great, 20t pinion going in plus red clutch spring, few rolls today and nothing broke. Switchblade kill switch works great 1 Quote Link to comment Share on other sites More sharing options...
Scotty napalm Posted January 21, 2017 Share Posted January 21, 2017 Another tank thru great, 20t pinion going in plus red clutch spring, few rolls today and nothing broke. Switchblade kill switch works great Strong as ay mate. Beat mine up quite a lot to be fair. Nothing broke yetSent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 22, 2017 Author Share Posted January 22, 2017 Red 8000 spring in and a 20t pinion on, looking forward to trying it and hoping for bit more bite and top speed, win win hopefully Quote Link to comment Share on other sites More sharing options...
kenny_st Posted January 22, 2017 Share Posted January 22, 2017 (edited) Good that you have had no more problems, both of my x2s came Friday there still in there boxes will get them out next week I hope Edited January 22, 2017 by kenny_st 2 Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 22, 2017 Author Share Posted January 22, 2017 38 minutes ago, kenny_st said: Good that you have had no more problems, both of my x2s came Friday there still in there boxes will get them out next week cc 38 minutes ago, kenny_st said: Good that you have had no more problems, both of my x2s came Friday there still in there boxes will get them out next week I hope Cool, great once sorted, deffo be ready for losi diff internals, I would also get nrp O rings, good diff oil, great engine and exhaust, servos still good and standard battery does the job, enjoy Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 22, 2017 Author Share Posted January 22, 2017 I also made plastic wheel arches and cable tied them to roll cage, also a bit duck tape in the arches, keeps 95% crap out Quote Link to comment Share on other sites More sharing options...
Pistonhead Posted January 22, 2017 Share Posted January 22, 2017 Got my X2 coming Wednesday, and already got a plan to use on old wheelbarrow inner tube as a set of dirt skirts on the cage. 1 Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 23, 2017 Author Share Posted January 23, 2017 9 hours ago, Pistonhead said: Got my X2 coming Wednesday, and already got a plan to use on old wheelbarrow inner tube as a set of dirt skirts on the cage. Good plan, can't wait for drier days Quote Link to comment Share on other sites More sharing options...
kenny_st Posted January 23, 2017 Share Posted January 23, 2017 12 hours ago, just rolling said: losi diffs are ready and waiting not taking a chance on these have cost me to much and with all the other stuff I needed 1 Quote Link to comment Share on other sites More sharing options...
Pistonhead Posted January 23, 2017 Share Posted January 23, 2017 I'll take my chances with the diffs, if they go then no biggie. I know they're a weak point, but I've also heard of some having no issues whatsoever. 2 Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 23, 2017 Author Share Posted January 23, 2017 3 hours ago, Pistonhead said: I'll take my chances with the diffs, if they go then no biggie. I know they're a weak point, but I've also heard of some having no issues whatsoever. A few had been ok with there diffs but all 3 of mine went within 3 tanks including running in lol, another tank done today with 20t pinion fitted and red 8000 spring on the zenoah g320, it bloody flies along, body looking a bit tired now. Anyone tried them internal cover things? other body options? thanks Quote Link to comment Share on other sites More sharing options...
Pistonhead Posted January 23, 2017 Share Posted January 23, 2017 Like the look of the 30*N big flex bodies myself, i know they're not to everyone's tastes but thry seem to hold up to abuse pretty well. 1 Quote Link to comment Share on other sites More sharing options...
Wraithstorm67 Posted January 24, 2017 Share Posted January 24, 2017 I spent a couple of days putting shoo goo on my shell and it's had lots of tumbles only damage is a crease in 1 wheel arch but no cracks at all well worth doing 1 Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 24, 2017 Author Share Posted January 24, 2017 9 hours ago, Pistonhead said: Like the look of the 30*N big flex bodies myself, i know they're not to everyone's tastes but thry seem to hold up to abuse pretty well. I like the look of them and seems to be the only option Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 24, 2017 Author Share Posted January 24, 2017 27 minutes ago, Wraithstorm67 said: I spent a couple of days putting shoo goo on my shell and it's had lots of tumbles only damage is a crease in 1 wheel arch but no cracks at all well worth doing That stuff sounds great when reading up on it, i shall try that around the mounting holes where i seem to be getting the most damage. For the size and weight of the x2 the shell holds up alot better than i expected as when it tumbles it deffo tumbles lol, gotta get outta the way! Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 24, 2017 Author Share Posted January 24, 2017 27 minutes ago, Wraithstorm67 said: I spent a couple of days putting shoo goo on my shell and it's had lots of tumbles only damage is a crease in 1 wheel arch but no cracks at all well worth doing That stuff sounds great when reading up on it, i shall try that around the mounting holes where i seem to be getting the most damage. For the size and weight of the x2 the shell holds up alot better than i expected as when it tumbles it deffo tumbles lol, gotta get outta the way! Quote Link to comment Share on other sites More sharing options...
Pistonhead Posted January 24, 2017 Share Posted January 24, 2017 I llove the look of the fully fendered Grafil raptor whatever it's called, just can't justify over £200 on a sacrificial item. Quote Link to comment Share on other sites More sharing options...
kenny_st Posted January 24, 2017 Share Posted January 24, 2017 the 30*N big flex bodies are very good a guy at the local track has a black one, makes the car a lot beefier to Quote Link to comment Share on other sites More sharing options...
just rolling Posted January 24, 2017 Author Share Posted January 24, 2017 4 hours ago, kenny_st said: the 30*N big flex bodies are very good a guy at the local track has a black one, makes the car a lot beefier to has it got a bit extra like mud guard under the shell at front? looks to have on photos Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.